As of r294068 boot1.efi can load loader.efi from ZFS.
As of r295320 boot1.efi prefers to load loader.efi from the same device
it was loaded from.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Replace `make regress` (legacy test make target) and `make test` (incomplete
test make target added with the FreeBSD test suite) with make check as it's
consistent with other open source projects.
`make check` defaults to running tests from `.OBJDIR`, but can be overridden
with the `CHECKDIR` variable.
Add `make checkworld` target to simplify running the FreeBSD test suite from
`TESTSBASE` (i.e. the top-level tests directory), similar to buildworld.
Document `make check` and `make checkworld` in build(7).
Other minor changes:
- Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify
`make check`.
- Remove terse warnings attached to `beforetest`/`aftertest`.
- Add kyua binary check to check target in suite.test.mk; error out if it's
not found
The MFC is [partly] contingent on other build related changes being MFCed.
Differential Revision: https://reviews.freebsd.org/D4406
MFC after: 2 months
X-MFC to: stable/10
Relnotes: yes
Reviewed by: bdrewery, Evan Cramer <eccramer@gmail.com>
Sponsored by: EMC / Isilon Storage Division
The NVMe specification does not define a maximum or optimal delete
size, so technically max delete size is min(full size of namespace,
2^32 - 1 LBAs). A single delete operation for a multi-TB NVMe
namespace though may take much longer to complete than the nvme(4)
I/O timeout period. So choose a sensible default here that is still
suitably large to minimize the number of overall delete operations.
This also fixes possible uint32_t overflow on initial TRIM operation
for zpool create operations for NVMe namespaces with >4G LBAs.
MFC after: 3 days
Sponsored by: Intel
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
sent using roundrobin protocol and set a better granularity and distribution
among the interfaces. Tuning the number of packages sent by interface can
increase throughput and reduce unordered packets as well as reduce SACK.
Example of usage:
# ifconfig bge0 up
# ifconfig bge1 up
# ifconfig lagg0 create
# ifconfig lagg0 laggproto roundrobin laggport bge0 laggport bge1 \
192.168.1.1 netmask 255.255.255.0
# ifconfig lagg0 rr_limit 500
Reviewed by: thompsa, glebius, adrian (old patch)
Approved by: bapt (mentor)
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D540
control algorithm options. The argument is variable length and is opaque
to TCP, forwarded directly to the algorithm's ctl_output method.
Provide new includes directory netinet/cc, where algorithm specific
headers can be installed.
The new API doesn't yet have any in tree consumers.
The original code written by lstewart.
Reviewed by: rrs, emax
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D711
This API has no in-tree consumers at the moment but is useful to at least
one out-of-tree consumer, and naturally complements existing vnode refcount
functions (vholdl(9), vdropl(9)).
Obtained from: kib (sys/ portion)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4947
Differential Revision: https://reviews.freebsd.org/D4953
Some classes of IOAT hardware prefetch reads. DMA operations that
depend on the result of prior DMA operations must use the DMA_FENCE flag
to prevent stale reads.
(E.g., I've hit this personally on Broadwell-EP. The Broadwell-DE has a
different IOAT unit that is documented to not pipeline DMA operations.)
Sponsored by: EMC / Isilon Storage Division
canonical place, and the nit-pickers are welcome to move this
information there with a cross reference.
Differential Review: https://reviews.freebsd.org/D4860
option to invert the polarity in software. Also add an option to capture
very narrow pulses by using the hardware's MSR delta-bit capability of
latching line state changes.
This effectively reverts the mistake I made in r286595 which was based on
empirical measurements made on hardware using TTL-level signaling, in which
the logic levels are inverted from RS-232. Thus, this re-syncs the polarity
with the requirements of RFC 2783, which is writen in terms of RS-232
signaling.
Narrow-pulse mode uses the ability of most ns8250 and similar chips to
provide a delta indication in the modem status register. The hardware is
able to notice and latch the change when the pulse width is shorter than
interrupt latency, which results in the signal no longer being asserted by
time the interrupt service code runs. When running in this mode we get
notified only that "a pulse happened" so the driver synthesizes both an
ASSERT and a CLEAR event (with the same timestamp for each). When the pulse
width is about equal to the interrupt latency the driver may intermittantly
see both edges of the pulse. To prevent generating spurious events, the
driver implements a half-second lockout period after generating an event
before it will generate another.
Differential Revision: https://reviews.freebsd.org/D4477
ioat_acquire_reserve() is an extended version of ioat_acquire(). It
allows users to reserve space in the channel for some number of
descriptors. If this succeeds, it guarantees that at least submission
of N valid descriptors will succeed.
Sponsored by: EMC / Isilon Storage Division
Due to FreeBSD system-wide limits on number of MSI-X vectors
(https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=199321),
it may be desirable to allocate fewer than the maximum number
of vectors for an NVMe device, in order to save vectors for
other devices (usually Ethernet) that can take better
advantage of them and may be probed after NVMe.
This tunable is expressed in terms of minimum number of CPUs
per I/O queue instead of max number of queues per controller,
to allow for a more even distribution of CPUs per queue. This
avoids cases where some number of CPUs have a dedicated queue,
but other CPUs need to share queues. Ideally the PR referenced
above will eventually be fixed and the mechanism implemented
here becomes obsolete anyways.
While here, fix a bug in the CPUs per I/O queue calculation to
properly account for the admin queue's MSI-X vector.
Reviewed by: gallatin
MFC after: 3 days
Sponsored by: Intel
Immediate problem fixed by the new KPI is the long-standing race
between device creation and assignments to cdev->si_drv1 and
cdev->si_drv2, which allows the window where cdevsw methods might be
called with si_drv1,2 fields not yet set. Devices typically checked
for NULL and returned spurious errors to usermode, and often left some
methods unchecked.
The new function interface is designed to be extensible, which should
allow to add more features to make_dev_s(9) without inventing yet
another name for function to create devices, while maintaining KPI and
even KBI backward-compatibility.
Reviewed by: hps, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D4746
The mdio driver interface is generally useful for devices that require
MDIO without the full MII bus interface. This lifts the driver/interface
out of etherswitch(4), and adds a mdio(4) man page.
Submitted by: Landon Fuller <landon@landonf.org>
Differential Revision: https://reviews.freebsd.org/D4606
While here, explicitly note the requirement that the BAR(s) must be
allocated prior to calling pci_alloc_msix().
Reviewed by: andrew, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D4688
exhausted.
It is possible for a bug in the code (or, theoretically, even unusual
network conditions) to exhaust all possible mbufs or mbuf clusters.
When this occurs, things can grind to a halt fairly quickly. However,
we currently do not call mb_reclaim() unless the entire system is
experiencing a low-memory condition.
While it is best to try to prevent exhaustion of one of the mbuf zones,
it would also be useful to have a mechanism to attempt to recover from
these situations by freeing "expendable" mbufs.
This patch makes two changes:
a) The patch adds a generic API to the UMA zone allocator to set a
function that should be called when an allocation fails because the
zone limit has been reached. Because of the way this function can be
called, it really should do minimal work.
b) The patch uses this API to try to free mbufs when an allocation
fails from one of the mbuf zones because the zone limit has been
reached. The function schedules a callout to run mb_reclaim().
Differential Revision: https://reviews.freebsd.org/D3864
Reviewed by: gnn
Comments by: rrs, glebius
MFC after: 2 weeks
Sponsored by: Juniper Networks
Different revisions support different operations. Refer to Intel
External Design Specifications to figure out what your hardware
supports.
Sponsored by: EMC / Isilon Storage Division
o With new KPI consumers can request contiguous ranges of pages, and
unlike before, all pages will be kept busied on return, like it was
done before with the 'reqpage' only. Now the reqpage goes away. With
new interface it is easier to implement code protected from race
conditions.
Such arrayed requests for now should be preceeded by a call to
vm_pager_haspage() to make sure that request is possible. This
could be improved later, making vm_pager_haspage() obsolete.
Strenghtening the promises on the business of the array of pages
allows us to remove such hacks as swp_pager_free_nrpage() and
vm_pager_free_nonreq().
o New KPI accepts two integer pointers that may optionally point at
values for read ahead and read behind, that a pager may do, if it
can. These pages are completely owned by pager, and not controlled
by the caller.
This shifts the UFS-specific readahead logic from vm_fault.c, which
should be file system agnostic, into vnode_pager.c. It also removes
one VOP_BMAP() request per hard fault.
Discussed with: kib, alc, jeff, scottl
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
