opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
The PT_DETACH case above the sendsig: label already looped over all
threads clearing flags in td_dbgflags. Reuse this loop to clear
TDB_SUSPEND and move the logic out of the sendsig: block.
Most of the conditionals in the 'sendsig:' block are now only different
for PT_ATTACH vs other continue requests. Pull the PT_ATTACH-specific
logic up into the PT_ATTACH case and simplify the 'sendsig:' block. This
also permits moving the unlock of proctree_lock above the sendsig: label
since PT_KILL doesn't hold the lock and and the other cases all fall
through to the label.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D13073
This fixes a panic when attaching to an already-stopped process after
r325028. While here, clean up a few other things in the control flow
of the 'sendsig' section:
- Only check for P_STOPPED_TRACE rather than either of P_STOPPED_SIG
or P_STOPPED_TRACE for most ptrace requests. The signal handling
code in kern_sig.c never sets just P_STOPPED_SIG for a traced
process, so if P_STOPPED_SIG is stopped, P_STOPPED_TRACE should be
set anyway. Remove a related debug printf. Assuming P_STOPPED_TRACE
permits simplifications in the 'sendsig:' block.
- Move the block to clear the pending thread state up into a new
block conditional on P_STOPPED_TRACE and handle delivering pending
signals to the reporting thread and clearing the reporting thread's
state in this block.
- Consolidate case to send a signal to the process in a single case
for PT_ATTACH. The only case that could have been in the else before
was a PT_ATTACH where P_STOPPED_SIG was not set, so both instances
of kern_psignal() collapse down to just PT_ATTACH.
Reported by: pho, mmel
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D12837
When multiple threads wish to report a tracing event to a debugger,
both threads call ptracestop() and one thread will win the race to be
the reporting thread (p->p_xthread). The debugger uses PT_LWPINFO
with the process ID to determine which thread / LWP is reporting an
event and the details of that event. This event is cleared as a side
effect of the subsequent ptrace event that resumed the process
(PT_CONTINUE, PT_STEP, etc.). However, ptrace() was clearing the
event identified by the LWP ID passed to the resume request even if
that wasn't the 'p_xthread'. This could result in clearing an event
that had not yet been observed by the debugger and leaving the
existing event for 'p_thread' pending so that it was reported a second
time.
Specifically, if the debugger stopped due to a software breakpoint in
one thread, but then switched to another thread that was used to
resume (e.g. if the user switched to a different thread and issued a
step), the resume request (PT_STEP) cleared a pending event (if any)
for the thread being stepped. However, the process immediately
stopped and the first thread reported it's breakpoint event a second
time. The debugger decremented the PC for "both" breakpoint events
which resulted in the PC now pointing into the middle of an
instruction (on x86) and a SIGILL fault when the process was resumed a
second time.
To fix, always clear the pending event for 'p_xthread' when resuming a
process. ptrace() still honors the requested LWP ID when enabling
single-stepping (PT_STEP) or setting a different PC (PT_CONTINUE).
Reported by: GDB testsuite (gdb.threads/continue-pending-status.exp)
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12794
Process core notes for a 32-bit process running on a 64-bit host need to
use 32-bit structures so that the note layout matches the layout of notes
of a core dump of a 32-bit process under a 32-bit kernel.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D11407
struct thread.
For all architectures, the syscall trap handlers have to allocate the
structure on the stack. The structure takes 88 bytes on 64bit arches
which is not negligible. Also, it cannot be easily found by other
code, which e.g. caused duplication of some members of the structure
to struct thread already. The change removes td_dbg_sc_code and
td_dbg_sc_nargs which were directly copied from syscall_args.
The structure is put into the copied on fork part of the struct thread
to make the syscall arguments information correct in the child after
fork.
This move will also allow several more uses shortly.
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
X-Differential revision: https://reviews.freebsd.org/D11080
resulting in a process dumping core in the corefile.
Also extend procstat to view select members of 'struct ptrace_lwpinfo'
from the contents of the note.
Sponsored by: Dell EMC Isilon
When a thread is stopped in ptracestop(), the ptrace(2) user may request
a signal be delivered upon resumption of the thread. Heretofore, those signals
were discarded unless ptracestop()'s caller was issignal(). Fix this by
modifying ptracestop() to queue up signals requested by the ptrace user that
will be delivered when possible. Take special care when the signal is SIGKILL
(usually generated from a PT_KILL request); no new stop events should be
triggered after a PT_KILL.
Add a number of tests for the new functionality. Several tests were authored
by jhb.
PR: 212607
Reviewed by: kib
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Dell EMC
In collaboration with: jhb
Differential Revision: https://reviews.freebsd.org/D9260
Such processes are stopped synchronously by a direct call to
ptracestop(SIGTRAP) upon exec. P2_PTRACE_FSTP causes the exec()ing thread
to suspend itself while waiting for a SIGSTOP that never arrives.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7576
target. Due to a way issignal() selects the next signal to deliver
and report, if the simultaneous or already pending another signal
exists, that signal might be reported by the next waitpid(2) call.
This causes minor annoyance for debuggers, which must be prepared to
take any signal as the first event, then filter SIGSTOP later.
More importantly, for tools like gcore(1), which attach and then
detach without processing events, SIGSTOP might leak to be delivered
after PT_DETACH. This results in the process being unintentionally
stopped after detach, which is fatal for automatic tools.
The solution is to force SIGSTOP to be the first signal reported after
the attach. Attach code is modified to set P2_PTRACE_FSTP to indicate
that the attaching ritual was not yet finished, and issignal() prefers
SIGSTOP in that condition. Also, the thread which handles
P2_PTRACE_FSTP is made to guarantee to own p_xthread during the first
waitpid(2). All that ensures that SIGSTOP is consumed first.
Additionally, if P2_PTRACE_FSTP is still set on detach, which means
that waitpid(2) was not called at all, SIGSTOP is removed from the
queue, ensuring that the process is resumed on detach.
In issignal(), when acting on STOPing signals, remove the signal from
queue before suspending. Otherwise parallel attach could result in
ptracestop() acting on that STOP as if it was the STOP signal from the
attach. Then SIGSTOP from attach leaks again.
As a minor refactoring, some bits of the common attach code is moved
to new helper proc_set_traced().
Reported by: markj
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7256
First, PL_FLAG_FORKED events now also set a PL_FLAG_VFORKED flag when
the new child was created via vfork() rather than fork(). Second, a
new PL_FLAG_VFORK_DONE event can now be enabled via the PTRACE_VFORK
event mask. This new stop is reported after the vfork parent resumes
due to the child calling exit or exec. Debuggers can use this stop to
reinsert breakpoints in the vfork parent process before it resumes.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7045
object lock.
The vmspace_free() operations might need to lock map, object etc on
last dereference. Postpone the free until object's inspection is
done.
Reported and tested by: will
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
ptrace() now stores a mask of optional events in p_ptevents. Currently
this mask is a single integer, but it can be expanded into an array of
integers in the future.
Two new ptrace requests can be used to manipulate the event mask:
PT_GET_EVENT_MASK fetches the current event mask and PT_SET_EVENT_MASK
sets the current event mask.
The current set of events include:
- PTRACE_EXEC: trace calls to execve().
- PTRACE_SCE: trace system call entries.
- PTRACE_SCX: trace syscam call exits.
- PTRACE_FORK: trace forks and auto-attach to new child processes.
- PTRACE_LWP: trace LWP events.
The S_PT_SCX and S_PT_SCE events in the procfs p_stops flags have
been replaced by PTRACE_SCE and PTRACE_SCX. PTRACE_FORK replaces
P_FOLLOW_FORK and PTRACE_LWP replaces P2_LWP_EVENTS.
The PT_FOLLOW_FORK and PT_LWP_EVENTS ptrace requests remain for
compatibility but now simply toggle corresponding flags in the
event mask.
While here, document that PT_SYSCALL, PT_TO_SCE, and PT_TO_SCX both
modify the event mask and continue the traced process.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7044
Add two new LWPINFO flags: PL_FLAG_BORN and PL_FLAG_EXITED for reporting
thread creation and destruction. Newly created threads will stop to report
PL_FLAG_BORN before returning to userland and exiting threads will stop to
report PL_FLAG_EXIT before exiting completely. Both of these events are
only enabled and reported if PT_LWP_EVENTS is enabled on a process.
These helper functions can be used to read in or write a buffer from or to
an arbitrary process' address space. Without them, this can only be done
using proc_rwmem(), which requires the caller to fill out a uio. This is
onerous and results in code duplication; the new functions provide a simpler
interface which is sufficient for most existing callers of proc_rwmem().
This change also adds a manual page for proc_rwmem() and the new functions.
Reviewed by: jhb, kib
Differential Revision: https://reviews.freebsd.org/D4245
is non-zero.
- Include the process address in the PROC_ASSERT_HELD() and
PROC_ASSERT_NOT_HELD() assertion messages so that the corresponding
process can be found easily when debugging.
MFC after: 1 week
r289660:
Do not allow to execute ptrace(PT_TRACE_ME) when the process is
already traced.
Do not allow to execute ptrace(PT_TRACE_ME) when there is no parent
which can trace the process, i.e. when the parent is already init.
Note that after the PT_TRACE_ME request the process is unkillable and
non-continuable until a debugger is attached, or parent is killed, the
later clears P_TRACED state. Since init clearly would not debug the
caller, and cannot be killed, disallow creation of unkillable
processes.
Reviewed by: jhb, pho
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D3908
- The new PC value and signal passed to PT_CONTINUE, PT_DETACH, PT_SYSCALL,
and PT_TO_SC[EX].
- The system call code returned via PT_LWPINFO.
MFC after: 1 week
and exit events. procfs stop events for system call tracing report these
values (argument count for system call entry and code for system call exit),
but ptrace() does not provide this information. (Note that while the system
call code can be determined in an ABI-specific manner during system call
entry, it is not generally available during system call exit.)
The values are exported via new fields at the end of struct ptrace_lwpinfo
available via PT_LWPINFO.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3536
original parent. Otherwise the debugee will be set as an orphan of
the debugger.
Add tests for tracing forks via PT_FOLLOW_FORK.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D2809
SIGCHLD signal, should keep full 32 bits of the status passed to the
_exit(2).
Split the combined p_xstat of the struct proc into the separate exit
status p_xexit for normal process exit, and signalled termination
information p_xsig. Kernel-visible macro KW_EXITCODE() reconstructs
old p_xstat from p_xexit and p_xsig. p_xexit contains complete status
and copied out into si_status.
Requested by: Joerg Schilling
Reviewed by: jilles (previous version), pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
When providing memory map information to userland, populate the vnode pointer
for tmpfs files. Set the memory mapping to appear as a vnode type, to match
FreeBSD 9 behavior.
This fixes the use of tmpfs files with the dtrace pid provider,
procstat -v, procfs, linprocfs, pmc (pmcstat), and ptrace (PT_VM_ENTRY).
Submitted by: Eric Badger <eric@badgerio.us> (initial revision)
Obtained from: Dell Inc.
PR: 198431
MFC after: 2 weeks
Reviewed by: jhb
Approved by: kib (mentor)
Without this, if a process was being traced by truss(1), which
uses different p_stops bits than gdb(1), the latter would
misbehave because of the unexpected bits.
Reported by: jceel
Submitted by: sef
Sponsored by: iXsystems, Inc.
MFC after: 2 weeks
the orphaned descendants. Base of the API is modelled after the same
feature from the DragonFlyBSD.
Requested by: bapt
Reviewed by: jilles (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
One problem is inferior(9) looping due to the process tree becoming a
graph instead of tree if the parent is traced by child. Another issue
is due to the use of p_oppid to restore the original parent/child
relationship, because real parent could already exited and its pid
reused (noted by mjg).
Add the function proc_realparent(9), which calculates the parent for
given process. It uses the flag P_TREE_FIRST_ORPHAN to detect the head
element of the p_orphan list and than stepping back to its container
to find the parent process. If the parent has already exited, the
init(8) is returned.
Move the P_ORPHAN and the new helper flag from the p_flag* to new
p_treeflag field of struct proc, which is protected by proctree lock
instead of proc lock, since the orphans relationship is managed under
the proctree_lock already.
The remaining uses of p_oppid in ptrace(PT_DETACH) and process
reapping are replaced by proc_realparent(9).
Phabric: D417
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
exhausted.
- Add a new protect(1) command that can be used to set or revoke protection
from arbitrary processes. Similar to ktrace it can apply a change to all
existing descendants of a process as well as future descendants.
- Add a new procctl(2) system call that provides a generic interface for
control operations on processes (as opposed to the debugger-specific
operations provided by ptrace(2)). procctl(2) uses a combination of
idtype_t and an id to identify the set of processes on which to operate
similar to wait6().
- Add a PROC_SPROTECT control operation to manage the protection status
of a set of processes. MADV_PROTECT still works for backwards
compatability.
- Add a p_flag2 to struct proc (and a corresponding ki_flag2 to kinfo_proc)
the first bit of which is used to track if P_PROTECT should be inherited
by new child processes.
Reviewed by: kib, jilles (earlier version)
Approved by: re (delphij)
MFC after: 1 month
We cannot busy a page before doing pagefaults.
Infact, it can deadlock against vnode lock, as it tries to vget().
Other functions, right now, have an opposite lock ordering, like
vm_object_sync(), which acquires the vnode lock first and then
sleeps on the busy mechanism.
Before this patch is reinserted we need to break this ordering.
Sponsored by: EMC / Isilon storage division
Reported by: kib
- It does not let pages respect the LRU policy
- It bloats the active/inactive queues of few pages
Try to avoid it as much as possible with the long-term target to
completely remove it.
Use the soft-busy mechanism to protect page content accesses during
short-term operations (like uiomove_fromphys()).
After this change only vm_fault_quick_hold_pages() is still using the
hold mechanism for page content access.
There is an additional complexity there as the quick path cannot
immediately access the page object to busy the page and the slow path
cannot however busy more than one page a time (to avoid deadlocks).
Fixing such primitive can bring to complete removal of the page hold
mechanism.
Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff
Tested by: pho
* VM_OBJECT_LOCK and VM_OBJECT_UNLOCK are mapped to write operations
* VM_OBJECT_SLEEP() is introduced as a general purpose primitve to
get a sleep operation using a VM_OBJECT_LOCK() as protection
* The approach must bear with vm_pager.h namespace pollution so many
files require including directly rwlock.h
until child performs exec(). The behaviour is reasonable when a
debugger is the real parent, because the parent is stopped until
exec(), and sending a debugging event to the debugger would deadlock
both parent and child.
On the other hand, when debugger is not the parent of the vforked
child, not sending debugging signals makes it impossible to debug
across vfork.
Fix the issue by declining generating debug signals only when vfork()
was done and child called ptrace(PT_TRACEME). Set a new process flag
P_PPTRACE from the attach code for PT_TRACEME, if P_PPWAIT flag is
set, which indicates that the process was created with vfork() and
still did not execed. Check P_PPTRACE from issignal(), instead of
refusing the trace outright for the P_PPWAIT case. The scope of
P_PPTRACE is exactly contained in the scope of P_PPWAIT.
Found and tested by: zont
Reviewed by: pluknet
MFC after: 2 weeks
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
to attach to the process, it is surprising that the process is resumed
without inputting any gdb commands, however ptrace manual said:
The tracing process will see the newly-traced process stop and may
then control it as if it had been traced all along.
But the current code does not work in this way, unless traced process
received a signal later, it will continue to run as a background task.
To fix this problem, just send signal SIGSTOP to the traced process after
we resumed it, this works like that you are attaching to a running process,
it is not perfect but better than nothing.
to the debugger. When reparenting for debugging, keep the child in
the new orphan list of old parent. When looping over the children in
kern_wait(), iterate over both children list and orphan list to search
for the process by pid.
Submitted by: Dmitry Mikulin <dmitrym juniper.net>
MFC after: 2 weeks
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
