StarCat systems which provides time-of-day services for both as well as
console service for Serengeti, i.e. Sun Fire V1280. While the latter is
described with a device type of serial in the OFW device tree, it isn't
actually an UART. Nevertheless the console service is handled by uart(4)
as this allowed to re-use quite a bit of MD and MI code. Actually, this
idea is stolen from Linux which interfaces the sun4v hypervisor console
with the Linux counterpart of uart(4).
bus we actually mapped at rather than always based on the last bus we
encountered while moving upward in the tree. Otherwise we might use the
wrong bus space in case the bridge directly underneath the nexus doesn't
require mapping, i.e. was skipped as it's the case for ssm(4) nodes.
set, it make sense to actually initialize that array. This fixes some
issues with 4965 adapters where the TX power is crucial.
This got lost somewhere while merging with the OpenBSD code.
Approved by: rpaulo (mentor)
Obtained from: OpenBSD
MFC after: 2 weeks
* Enable DC calibration and crystal calibration on Centrino Advanced-N
6250 parts.
* Workaround for a HW bug (does not affect 4965AGN) that may sporadically
affect latency under some rare circumstances. From a similar commit to
iwlwifi.
* Update sensitivity settings for 5000 series to workaround a performance
bug in the DSP (1000 is not affected so we keep the old values for 5000).
* Update sensitivity settings for 6000 series.
* Set differential gains on 6250 too (but use a 1.0 factor, not 1.5).
* Init OFDM sensitivity with min value (which depends on the chip)
instead of hardcoding it to 90.
* Read calibration version from ROM and set IWN_GP_DRIVER_CALIB_VER6
bit on 6x50 if version >= 6.
Approved by: rpaulo (mentor)
Obtained from: OpenBSD
MFC after: 2 weeks
- code flow in handler could let interrupt be
reenabled when not wanted.
- change where the RX lock is taken to improve
performance.
- adapter->msix is true for MSI systems also,
it needs to explicitly test for 82574, good one :)
compiled with "options VIMAGE".
As it is now, there is still a single instance of the pipes,
and it is only usable from vnet0 (the main instance).
Trying to use a pipe from a different vimage does not crash
the system as it did before, but the traffic coming out from
the pipe goes to the wrong place, and i still need to
figure out where.
Support for per-vimage pipes is almost there (just a matter of
uncommenting the VNET_* definitions for dn_cfg, plus putting into
the structure the remaining static variables), however i need
first to figure out how init/uninit work, and also to understand
where packets are ending up on exit from a pipe.
In summary: vimage support for dummynet is not complete yet,
but we are getting there.
broken atrtc.
Now if you want more correct stats on profhz and stathz it may be
disabled by setting to 0.
Reported by: A. Akephalos <akephalos dot akephalos at gmail dot com>,
Jakub Lach <jakub_lach at mailplus dot pl>
MFC: 1 week
memory with the specified physical attributes. In particular, like
kmem_alloc_contig(), the caller can specify the physical address range
from which the physical pages are allocated and the memory attributes
(i.e., cache behavior) for these physical pages. However, in contrast to
kmem_alloc_contig() or contigmalloc(), the physical pages that are
allocated by kmem_alloc_attr() are not necessarily physically contiguous.
This function is needed by DRM and VirtualBox.
Correct an error in the prototype for kmem_malloc(). The third argument
had the wrong type.
Tested by: rnoland
MFC after: 3 days
due to rounding the buffer's physical address to the beginning of its
page. This fixes a panic in arge(4) when using PPPoE.
Reported by: Jakob van Santen <vansanten at wisc dot edu>
Reviewed by: gonzo
Obtained from: amd64
- add CRC stripping to the RX side, this was handled
by some obscure code in rxeof previously, its easier
to simply have the hardware strip it now.
- Add back an ALTQ change that slipped between the cracks
- Add an update to the watchdog_time in the xmit code, not
doing this in ixgbe caused problems, think its needed here
as well.
VLAN HWFILTER from being used by default, this breaks
stacked pseudo devices, and as it turns out, also breaks
virtual machines that happen to use VLANS (didn't know that
before :). Put the fix back into the em driver, and for good
measure add the same code to the igb driver where it should
have been anyway.
Just relying on status LE ownership of status block seems to cause
poor performance. Always read current status index register first
and then check status ownership as we had before. Accessing status
index register seems to trigger immediate status update if
controller have pending status updates.
MFC after: 1 week
Reported by: Andre Albsmeier <Andre.Albsmeier <> siemens dot com>
Tested by: Andre Albsmeier <Andre.Albsmeier <> siemens dot com>
