the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
- p_sflag was mostly protected by PROC_LOCK rather than the PROC_SLOCK or
previously the sched_lock. These bugs have existed for some time.
- Allow swapout to try each thread in a process individually and then
swapin the whole process if any of these fail. This allows us to move
most scheduler related swap flags into td_flags.
- Keep ki_sflag for backwards compat but change all in source tools to
use the new and more correct location of P_INMEM.
Reported by: pho
Reviewed by: attilio, kib
Approved by: re (kensmith)
have real idle processes for that.
- Fix the display on SMP by not scaling the sum of %CPU down
to 1. Instead, display raw data as computed by the kernel,
like in top(1).
Reviewed by: bde
Approved by: re (bmah)
MFC after: 1 week
of threaded RPC servers to work out of the box.
Spotted by: Changming Sun <changming at staff.sina.com.cn>
Sponsored by: SINA Corporation
Approved by: re (kensmith)
<netinet/tcp_fsm.h> is included into any compilation unit that needs
tcpstates[]. Also remove incorrect extern declarations and TCPDEBUG
conditionals. This allows kernels both with and without TCPDEBUG to
build, and unbreaks the tinderbox.
Approved by: re (rwatson)
containing 64-bit arguments would have explicit padding.
On 64-bit platforms there was no padding, so the dummy
argument was not covering anything. On 32-bit platforms
with weak alignment (i.e. i386) the 64-bit argument did
not need to be aligned, so there too an aditional argument
was introduced. On 32-bit platforms with strong alignment
(i.e. PowerPC) the dummy argument in fact cover the padding.
By elimininating the dummy argument, 64-bit platforms now
have 1 argument less. This also applies to 32-bit platforms
with weak alignment. On PowerPC this doesn't matter, because
the padding is still there. We just don't "name" it.
Deal with those 3 cases.
Approved by: re (kensmith)
general, when support was added to netstat for fetching data using sysctl,
no provision was left for fetching equivalent data from a core dump, and
in fact, netstat would _always_ fetch data from the live kernel using
sysctl even when -M was specified resulting in the user believing they
were getting data from coredumps when they actually weren't. Some specific
changes:
- Add a global 'live' variable that is true if netstat is running against
the live kernel and false if -M has been specified.
- Stop abusing the sysctl flag in the protocol tables to hold the protocol
number. Instead, the protocol is now its own field in the tables, and
it is passed as a separate parameter to the PCB and stat routines rather
than overloading the KVM offset parameter.
- Don't run PCB or stats functions who don't have a namelist offset if we
are being run against a crash dump (!live).
- For the inet and unix PCB routines, we generate the same buffer from KVM
that the sysctl usually generates complete with the header and trailer.
- Don't run bpf stats for !live (before it would just silently always run
live).
- kread() no longer trashes memory when opening the buffer if there is an
error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX.
- The multicast routing code doesn't fallback to kvm on live kernels if
the sysctl fails. Keeping this made the code rather hairy, and netstat
is already tied to the kernel ABI anyway (even when using sysctl's since
things like xinpcb contain an inpcb) so any kernels this is run against
that have the multicast routing stuff should have the sysctls.
- Don't try to dig around in the kernel linker in the netgraph PCB routine
for core dumps.
Other notes:
- sctp's PCB routine only works on live kernels, it looked rather
complicated to generate all the same stuff via KVM. Someone can always
add it later if desired though.
- Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered.
- Use sysctlbyname() everywhere rather than hardcoded mib values.
MFC after: 1 week
Approved by: re (rwatson)
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
being output in verbose mode when doing recursive[1].
- Use better representation of S:
PR: bin/114470
Submitted by: Ighighi <ighighi gmail com> [1]
Approved by: re (hrs)
whether we should ignore case, determine the flag by calling
compile_flags() first. Also, make sure that we obtain an
initialized cmd->u.s buffer before processing further. We
may want to refine this solution later, but for now, make
the changes in order to unbreak world build after a sed(1)
with rev. 1.29 of compile.c is installed.
Approved by: re (hrs)
This was needed during the IPSEC->FAST_IPSEC->IPSEC transition
period to not break the build after picking up netipsec header
files. Now that the FAST_IPSEC kernel option is gone and the
default is IPSEC again those defines are superfluous.
Approved by: re (rwatson)
setenv(3) by tracking the size of the memory allocated instead of using
strlen() on the current value.
Convert all calls to POSIX from historic BSD API:
- unsetenv returns an int.
- putenv takes a char * instead of const char *.
- putenv no longer makes a copy of the input string.
- errno is set appropriately for POSIX. Exceptions involve bad environ
variable and internal initialization code. These both set errno to
EFAULT.
Several patches to base utilities to handle the POSIX changes from
Andrey Chernov's previous commit. A few I re-wrote to use setenv()
instead of putenv().
New regression module for tools/regression/environ to test these
functions. It also can be used to test the performance.
Bump __FreeBSD_version to 700050 due to API change.
PR: kern/99826
Approved by: wes
Approved by: re (kensmith)
- Fix logic handling execve(). We will not be able to
obtain information otherwise.
- truss coredump [1].
- truss does not work against itself [2].
PR: bin/58970 [1], bin/45193 [2]
Submitted by: Howard Su
Approved by: re (kensmith)
o shorten explainations which are over 80 columns in console.
o group rows
o clean up and change explanations a little bit.
Obtained from: weongyo.jeong@gmail.com
"static". The header file generated by "rpcgen -h" will always declare
it as extern, leading to a "static after extern" error being issued by
gcc-4.2. This caused only a warning in gcc-3.x, but it has been wrong
all the time.
This change does not modify the code generated by "rpcgen -m", it only
affects rpcgen used to generate server stubs with a local main function.
This is the minimal patch. It does not remove the now obsolete "storage"
parameter from write_program() and write_programs() in an attempt to keep
differences to other systems' versions of rpcgen as small as possible.
priorities, etc.) in the NICE field:
Use a combination of pri_native and pri_user instead of pri_level to
guess the original realtime priority. Using pri_level here has been
wrong since 2001/02/12. Using only pri_native here would be correct
if the kernel actually initialized it reasonably. (The kernel exports
its raw td_base_priority as pri_native, but userland mostly wants a
refined base priority). Give up on waiting pri_native to work correctly
and only use it when there is nothing better (for kthreads).
This should reduce printing of bizarre pseudo-nice values. Bizarre
values are still printed if we observe a transient borrowed priority
for a kthread (transient borrowing is the main thing that makes the
raw td_base_priority almost useless in userland), or if there is a
kernel bug. One current kernel bug involves the kernel idprio thread
pagezero permanently changing its priority from PRI_MAX_IDLE (255) to
PUSER (160). Then the bizarre value "ki-6" is printed instead of
"ki31". Here "-6" is PRI_MIN_IDLE - PUSER = -64 truncated to 2
characters. We are observing a transient borrowed priority that has
become permanent due to a bug.
ps/print.c:priorityr() needs similar changes (including ones in stage 2
here).
