Commit Graph

47 Commits

Author SHA1 Message Date
glebius
b3b337a80e Mechanically convert to if_inc_counter(). 2014-09-19 03:51:26 +00:00
glebius
9b93b159b3 Use define from if_var.h to access a field inside struct if_data,
that resides in struct ifnet.

Sponsored by:	Nginx, Inc.
2014-08-30 19:55:54 +00:00
jhb
e8769d6be2 Fix various NIC drivers to properly cleanup static DMA resources.
In particular, don't check the value of the bus_dma map against NULL
to determine if either bus_dmamem_alloc() or bus_dmamap_load() succeeded.
Instead, assume that bus_dmamap_load() succeeeded (and thus that
bus_dmamap_unload() should be called) if the bus address for a resource
is non-zero, and assume that bus_dmamem_alloc() succeeded (and thus
that bus_dmamem_free() should be called) if the virtual address for a
resource is not NULL.

In many cases these bugs could result in leaks when a driver was detached.

Reviewed by:	yongari
MFC after:	2 weeks
2014-06-11 14:53:58 +00:00
glebius
ff6e113f1b The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
glebius
a69aaa7721 Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
dim
373133f0ad Remove duplicate const specifiers in many drivers (I hope I got all of
them, please let me know if not).  Most of these are of the form:

static const struct bzzt_type {
	[...list of members...]
} const bzzt_devs[] = {
	[...list of initializers...]
};

The second const is unnecessary, as arrays cannot be modified anyway,
and if the elements are const, the whole thing is const automatically
(e.g. it is placed in .rodata).

I have verified this does not change the binary output of a full kernel
build (except for build timestamps embedded in the object files).

Reviewed by:	yongari, marius
MFC after:	1 week
2012-11-05 19:16:27 +00:00
marius
17e14c6132 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
marius
b4610d98b0 - Import the common MII bitbang'ing code from NetBSD and convert drivers to
take advantage of it instead of duplicating it. This reduces the size of
  the i386 GENERIC kernel by about 4k. The only potential in-tree user left
  unconverted is xe(4), which generally should be changed to use miibus(4)
  instead of implementing PHY handling on its own, as otherwise it makes not
  much sense to add a dependency on miibus(4)/mii_bitbang(4) to xe(4) just
  for the MII bitbang'ing code. The common MII bitbang'ing code also is
  useful in the embedded space for using GPIO pins to implement MII access.
- Based on lessons learnt with dc(4) (see r185750), add bus barriers to the
  MII bitbang read and write functions of the other drivers converted in
  order to ensure the intended ordering. Given that register access via an
  index register as well as register bank/window switching is subject to the
  same problem, also add bus barriers to the respective functions of smc(4),
  tl(4) and xl(4).
- Sprinkle some const.

Thanks to the following testers:
Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4))
Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4).

Reviewed by:	yongari (subset of drivers)
Obtained from:	NetBSD (partially)
2011-11-01 16:13:59 +00:00
marius
d0f32374e6 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
jhb
00c3c01f4f Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
mdf
8045b08e4d sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
Commit the rest of the devices.
2011-01-12 19:53:56 +00:00
marius
385153aa98 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
yongari
f0e5a03c15 It seems some old Sundace(now IC Plus Corp.) controllers do not
like memory mapped register access. Typical problem from the issue
was MII access returned unreliable values. I'm not sure this comes
from lack of register flushing in MII access after accessing
STE_PHYCTL register though.
To address the issue, read hints data that controls which type of
memory mapping should be used in driver. ste(4) still prefers
memory mapping to io mapping but honor hints entered by user except
for controllers that have problems with memory mapping.
The hint to use iomapping could be given by adding the following
line to /boot/device.hints file.

hint.ste.0.prefer_iomap="1"

PR:	kern/149285
MFC after:	5 days
2010-08-09 01:47:09 +00:00
yongari
e75e4842d3 Make sure to store dma address of RX buffer in little endian form.
This fixes the last bug which keeps ste(4) from working on sparc64.
2010-01-08 02:43:20 +00:00
yongari
50b787cde8 Fix EEPROM access code to return data in host byte order.
EEPROM on ST201 always returns 16bits data with little endian
format so conversion to host order is required.
This change fixes inversed ethernet address on sparc64.
2010-01-08 02:39:53 +00:00
mbr
7450f52a57 Remove extraneous semicolons, no functional changes.
Submitted by:	Marc Balmer <marc@msys.ch>
MFC after:	1 week
2010-01-07 21:01:37 +00:00
yongari
62ca5a5574 ether_ifattach sets if_mtu, remove unnecessary code. 2009-12-24 20:45:33 +00:00
yongari
ad72b5b0b6 Update if_iqdrops in case of RX buffer allocation failure. 2009-12-24 20:43:31 +00:00
yongari
ff49e8168b Add suspend/resume support as well as basic WOL.
While I'm here simplify SIOCSIFCAP handler.
2009-12-24 18:17:53 +00:00
yongari
05362e1a1e Implement RX interrupt moderation using one-shot timer interrupt.
Unlike TX interrupt, ST201 does not provide any mechanism to
suppress RX interrupts. ste(4) can generate more than 70k RX
interrupts under heavy RX traffics such that these excessive
interrupts make system useless to process other useful things.
Maybe this was the major reason why polling support code was
introduced to ste(4).
The STE_COUNTDOWN register provides a programmable counter that
will generate an interrupt upon its expiration. We program
STE_DMACTL register to use 3.2us clock rate to drive the counter
register. Whenever ste(4) serves RX interrupt, the driver rearm
the timer to expire after STE_IM_RX_TIMER_DEFAULT time and disables
further generation of RX interrupts. This trick seems to work well
and ste(4) generates less than 8k RX interrupts even under 64 bytes
UDP torture test. Combined with TX interrupts, the total number of
interrupts are less than 10k which looks reasonable on heavily
loaded controller.

The default RX interrupt moderation time is 150us. Users can change
the value at any time with dev.ste.%d.int_rx_mod sysctl node.
Setting it 0 effectively disables the RX interrupt moderation
feature. Now we have both TX/RX interrupt moderation code so remove
loop of interrupt handler which resulted in sub-optimal performance
as well as more register accesses.
2009-12-24 17:22:15 +00:00
yongari
f417257f2a We don't need to generate DMA complete interrupt for every
transmitted frames. So request interrupt for every 16th frames. Due
to the limitation of hardware we can't suppress the interrupt as
driver should have to check TX status register. The TX status
register can store up to 31 TX status so driver can't send more
than 31 frames without reading TX status register.
With this change controller would not generate TX completion
interrupt for every frame, so reclaim transmitted frames in
ste_tick().
2009-12-23 19:38:22 +00:00
yongari
415876f659 Correct STE_COUNTDOWN register offset. The datasheet was wrong. 2009-12-23 19:26:38 +00:00
yongari
ec5cce9b74 Remove unused duplicated register definition. It seems the
definition was made to access STE_ASICCTL register as 16bits but
ste(4) always access the register as 32bits so it was never used
before.
2009-12-23 19:21:37 +00:00
yongari
35c91df5a7 Implement hardware MAC statistics counter support. The counters
could be accessed with dev.ste.0.stats sysctl node.
2009-12-23 19:18:07 +00:00
yongari
d6fc8a2d71 Report the correct result of mii_mediachg(). Previously it always
used to return success without respect to the result.
While I'm here use mii_mediachg() in ste_init_locked which allows
driver to use currently configured media. ste_ifmedia_upd() is
supposed to be called whenever user changes current media settings.
2009-12-23 18:42:25 +00:00
yongari
cf7345eeca Don't report link status if driver is not running. 2009-12-23 18:28:47 +00:00
yongari
88a3836722 Overhaul RX filter programming.
o Let RX filter handler program promiscuous/multicast filter as
   well as broadcasting.
 o Remove unnecessary register access.
 o Simplify ioctl handler and have set_rxfilter to handle
   IFF_PROMISC and IFF_ALLMULTI change instead of directly
   programming the controller.
 o Removed unnecessary error variable reinitialization in ioctl
   handler.
 o Add IFF_DRV_RUNNING check before programming multicast filter.
 o Configure maximum allowed frame length before enabling MAC.
   Datasheet didn't say the exact ordering of programming sequence
   but it looks more natural to set maximum allowed frame length
   first prior to enabling controller.
2009-12-23 18:24:22 +00:00
yongari
dc94299fa0 Reimplement controller reset. Datasheet says full reset takes about
1ms. Since we switched to memory register mapping make sure to
flush PCI posted write by reading the register again.
While I'm here add additional delays in loop while driver waits the
completion of the reset.
2009-12-23 17:54:24 +00:00
yongari
1469c6e0a8 Don't reinitialize controller if driver is already running. This
reduces number of link state UP/DOWN changes.
2009-12-23 17:46:11 +00:00
yongari
6b7d7d8935 Reimplement Tx status error handler as recommended by datasheet.
If ste(4) encounter TX underrun or excessive collisions the TX MAC
of controller is stalled so driver should wake it up again. TX
underrun requires increasing TX threshold value to minimize
further TX underruns. Previously ste(4) used to reset controller
to recover from TX underrun, excessive collision and reclaiming
error. However datasheet says only TX underrun requires resetting
entire controller. So implement ste_restart_tx() that restarts TX
MAC and do not perform full reset except TX underrun case.
Now ste(4) uses CSR_READ_2 instead of CSR_READ_1 to read
STE_TX_STATUS register. This way ste(4) will also read frame id
value and we can write the same value back to STE_TX_FRAMEID
register instead of overwriting it to 0. The datasheet was wrong
in write back of STE_TX_STATUS so add some comments why we do so.
Also always invoke ste_txeoc() after ste_txeof() in ste_poll as
without reading TX status register can stall TX MAC.
2009-12-22 23:57:10 +00:00
yongari
4918b61e08 Prefer bus_write_{1,2,4}/bus_read_{1,2,4} to
bus_space_write_{1,2,4}/bus_space_read_{1,2,4}.
Remove unused ste_bhandle and ste_btag in softc.
2009-12-22 21:44:25 +00:00
yongari
f32eb4d51a Prefer memory space register mapping over io space. If memory space
mapping fails fall back to old io space mapping.
While I'm here use PCIR_BAR macro.
2009-12-22 21:39:34 +00:00
yongari
a01fc2fc2d Instead of relying on hard resetting of controller to stop
receiving incoming traffics, try harder to gracefully stop active
DMA cycles and then stop MACs. This is the way what datasheet
recommends and seems to work reliably. Resetting controller while
active DMAs are in progress is bad thing as we can't predict how
DMAs touche allocated TX/RX buffers. This change ensures controller
stop state before attempting to release allocated TX/RX buffers.
Also update MAC statistics which could have been updated during the
wait time of MAC stop.

While I'm here remove unnecessary controller resets in various
location. ste(4) no longer relies on hard controller reset to stop
controller and resetting controller also clears all configured
settings which makes it hard to implement WOL in near future.
Now resetting a controller is performed in ste_init_locked().
2009-12-22 20:57:30 +00:00
yongari
036ec4b1ff Reimplement miibus_statchg method. Don't rely on link state change
interrupt. If we want to use link state change interrupt ste(4)
should also implement auto-negotiation complete handler as well as
various PHY access handling. Now link state change is handled by
mii(4) polling so it will automatically update link state UP/DOWN
events which in turn make ste(4) usable with lagg(4).

r199559 added a private timer to drive watchdog and the timer also
used to drive MAC statistics update. Because the MAC statistics
update is called whenever statistics counter reaches near-full, it
drove watchdog timer too fast such that it caused false watchdog
timeouts under heavy TX traffic conditions.
Fix the regression by separating ste_stats_update() from driving
watchdog timer and introduce a new function ste_tick() that handles
periodic job such as driving watchdog, MAC statistics update and
link state check etc.
While I'm here clear armed watchdog timer in ste_stop().
2009-12-22 20:11:56 +00:00
yongari
804c7f3ed4 Introduce sc_flags member variable and use it to keep track of
link state and PHY related information.
Remove ste_link and ste_one_phy variable of softc as it's not used
anymore.
While I'm here add IFF_DRV_RUNNING check in ste_start_locked().
2009-12-22 19:32:16 +00:00
yongari
69eb1537eb Add minimal dealy while ste(4) is waiting for the end of active DMA
cycle.
2009-12-22 19:00:18 +00:00
yongari
a9158a088f Add bus_dma(9) and endianness support to ste(4).
o Sorted includes and added missing header files.
 o Added basic endianness support. In theory ste(4) should work on
   any architectures.
 o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9).
 o Added 8 byte alignment limitation of TX/RX descriptor.
 o Added 1 byte alignment requirement for TX/RX buffers.
 o ste(4) controllers does not support DAC. Limit DMA address space
   to be within 32bit address.
 o Added spare DMA map to gracefully recover from DMA map failure.
 o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit
   was already checked in each iteration of loop so it can't be true.
 o Added second argument count to ste_rxeof(). It is used to limit
   number of iterations done in RX handler. ATM polling is the only
   consumer.
 o Removed ste_rxeoc() which was added to address RX stuck issue
   (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining
   descriptors to form a ring for RX descriptors. If RX descriptor
   chaining is not supported it's possible for controller to stop
   receiving incoming frames once controller pass the end of RX
   descriptor which in turn requires driver post new RX
   descriptors to receive more frames. For TX descriptors which
   does not support chaning, we exactly do manual chaining in
   driver by concatenating new descriptors to the end of previous
   TX chain.
   Maybe the workaround was borrowed from other drivers that does
   not support RX descriptor chaining, which is not valid for ST201
   controllers. I still have no idea how this address RX stuck
   issue and I can't reproduce the RX stuck issue on DFE-550TX
   controller.
 o Removed hw.ste_rxsyncs sysctl as the workaround was removed.
 o TX/RX side bus_dmamap_load_mbuf_sg(9) support.
 o Reimplemented optimized ste_encap().
 o Simplified TX logic of ste_start_locked().
 o Added comments for TFD/RFD requirements.
 o Increased number of RX descriptors to 128 from 64. 128 gave much
   better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
yongari
e3e93b1c6f Sort function prototyes. 2009-12-21 20:42:23 +00:00
yongari
6fa6ee6af2 style(9) 2009-12-21 20:18:01 +00:00
yongari
ea15f0871d Remove trailing white spaces. 2009-12-21 20:02:12 +00:00
yongari
bfa95b94ce s/u_intXX_t/uintXX_t/g 2009-12-21 20:00:27 +00:00
yongari
0ae6c4289d o Remove unnecessary return statement.
o Remove register keyword.
2009-12-21 19:56:11 +00:00
yongari
0d4c4761d7 Use ANSI function definations. 2009-12-21 19:50:29 +00:00
jhb
affabaa85e - Add a private timer to drive the transmit watchdog instead of using
if_watchdog and if_timer.
- Fix some issues in detach for sn(4), ste(4), and ti(4).  Primarily this
  means calling ether_ifdetach() before anything else.
2009-11-19 22:06:40 +00:00
rwatson
be5740a255 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
attilio
b523608331 When user_frac in the polling subsystem is low it is going to busy the
CPU for too long period than necessary.  Additively, interfaces are kept
polled (in the tick) even if no more packets are available.
In order to avoid such situations a new generic mechanism can be
implemented in proactive way, keeping track of the time spent on any
packet and fragmenting the time for any tick, stopping the processing
as soon as possible.

In order to implement such mechanism, the polling handler needs to
change, returning the number of packets processed.
While the intended logic is not part of this patch, the polling KPI is
broken by this commit, adding an int return value and the new flag
IFCAP_POLLING_NOCOUNT (which will signal that the return value is
meaningless for the installed handler and checking should be skipped).

Bump __FreeBSD_version in order to signal such situation.

Reviewed by:	emaste
Sponsored by:	Sandvine Incorporated
2009-05-30 15:14:44 +00:00
imp
5c156fea13 Move the ste driver from sys/pci to sys/dev/ste. 2008-08-14 20:09:58 +00:00