inpcb. When directly invoking udp_notify() from udp_ctlinput(), acquire
only a read lock; we may still see write locks in udp_notify() as the
in_pcbnotifyall() routine is shared with TCP and always uses a write lock
on the inpcb being notified.
MFC after: 1 month
some code paths, global or inpcb write locks are required, but for other
code paths, read locks or no locking at all are sufficient for the data
structures.
MFC after: 1 month
source or a specific destination address is requested as part of a send
on a UDP socket, read lock the inpcb rather than write lock it. This
will allow fully parallel transmit down to the IP layer when sending
simultaneously from multiple threads on a connected UDP socket.
Parallel transmit for more complex cases, such as when sendto(2) is
invoked with an address and there's already a local binding, will
follow.
MFC after: 1 month
datagram-only protocols, such as UDP. This version removes use of
sblock(), which is not required due to an inability to interlace data
improperly with datagrams, as well as avoiding some of the larger loops
and state management that don't apply on datagram sockets.
This is experimental code, so hook it up only for UDPv4 for testing; if
there are problems we may need to revise it or turn it off by default,
but it offers *significant* performance improvements for threaded UDP
applications such as BIND9, nsd, and memcached using UDP.
Tested by: kris, ps
rather than write locking: while we need to maintain a valid reference
to the inpcb and fix its state, no protocol layer state is modified
during an IPv4 UDP receive -- there are only changes at the socket
layer, which is separately protected by socket locking.
While parallel concurrent receive on a single UDP socket is currently
relatively unusual, introducing read locking in the transmit path,
allowing concurrent receive and transmit, will significantly improve
performance for loads such as BIND, memcached, etc.
MFC after: 2 months
Tested by: gnn, kris, ps
monitoring UDP connections using sysctls. In some cases, add
previously missing locking of inpcbs, as inp_socket is followed,
which also allows us to drop global locks more quickly.
MFC after: 1 week
ip6_savecontrol in preparation for udp_append() to no longer
need an WLOCK as we will no longer be modifying socket options.
Requested by: rwatson
Reviewed by: gnn
MFC after: 10 days
explicitly select write locking for all use of the inpcb mutex.
Update some pcbinfo lock assertions to assert locked rather than
write-locked, although in practice almost all uses of the pcbinfo
rwlock main exclusive, and all instances of inpcb lock acquisition
are exclusive.
This change should introduce (ideally) little functional change.
However, it lays the groundwork for significantly increased
parallelism in the TCP/IP code.
MFC after: 3 months
Tested by: kris (superset of committered patch)
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
- Resort includes a bit.
- Correct typos and wording problems in comments.
- Rename udpcksum to udp_cksum to be consistent with other UDP-related
configuration variables.
- Remove indirection of udp_notify through local notify variable in
udp_ctlinput(), which is presumably due to copying and pasting from TCP,
where multiple notify routines exist.
Approved by: re (kensmith)
- Move udp_sendspace and udp_recvspace global variables and associated
sysctls to the top of the file where most other such things are present.
- Rename static variable 'blackhole' to 'udp_blackhole' and unstaticize
so that we can add blackhole support for UDPv6 using the same MIB
variable.
- Move udp_append() above udp_input() to match the function order in
udp6_usrreq.c.
Approved by: re (kensmith)
free to be consistent with other error handling, and release socket buffer
lock before freeing mbufs and statistics updates rather than after.
Approved by: re (kensmith)
This commit includes only the kernel files, the rest of the files
will follow in a second commit.
Reviewed by: bz
Approved by: re
Supported by: Secure Computing
and protocol-independent host mode multicast. The code is written to
accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work.
This change only pertains to FreeBSD's use as a multicast end-station and
does not concern multicast routing; for an IGMPv3/MLDv2 router
implementation, consider the XORP project.
The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6,
which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html
Summary
* IPv4 multicast socket processing is now moved out of ip_output.c
into a new module, in_mcast.c.
* The in_mcast.c module implements the IPv4 legacy any-source API in
terms of the protocol-independent source-specific API.
* Source filters are lazy allocated as the common case does not use them.
They are part of per inpcb state and are covered by the inpcb lock.
* struct ip_mreqn is now supported to allow applications to specify
multicast joins by interface index in the legacy IPv4 any-source API.
* In UDP, an incoming multicast datagram only requires that the source
port matches the 4-tuple if the socket was already bound by source port.
An unbound socket SHOULD be able to receive multicasts sent from an
ephemeral source port.
* The UDP socket multicast filter mode defaults to exclusive, that is,
sources present in the per-socket list will be blocked from delivery.
* The RFC 3678 userland functions have been added to libc: setsourcefilter,
getsourcefilter, setipv4sourcefilter, getipv4sourcefilter.
* Definitions for IGMPv3 are merged but not yet used.
* struct sockaddr_storage is now referenced from <netinet/in.h>. It
is therefore defined there if not already declared in the same way
as for the C99 types.
* The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF
which are then interpreted as interface indexes) is now deprecated.
* A patch for the Rhyolite.com routed in the FreeBSD base system
is available in the -net archives. This only affects individuals
running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces.
* Make IPv6 detach path similar to IPv4's in code flow; functionally same.
* Bump __FreeBSD_version to 700048; see UPDATING.
This work was financially supported by another FreeBSD committer.
Obtained from: p4://bms_netdev
Submitted by: Wilbert de Graaf (original work)
Reviewed by: rwatson (locking), silence from fenner,
net@ (but with encouragement)
some cases, move to priv_check() if it was an operation on a thread and
no other flags were present.
Eliminate caller-side jail exception checking (also now-unused); jail
privilege exception code now goes solely in kern_jail.c.
We can't yet eliminate suser() due to some cases in the KAME code where
a privilege check is performed and then used in many different deferred
paths. Do, however, move those prototypes to priv.h.
Reviewed by: csjp
Obtained from: TrustedBSD Project
value in the mbuf with the result of the calculation. Previously,
if we chose to return an ICMP message, the quoted UDP checksum bytes
would be different to what was sent.
PR: 112471
Submitted by: Matthew Luckie <mluckie@cs.waikato.ac.nz>
MFC after: 3 weeks
protocol entry points using functions named proto_getsockaddr and
proto_getpeeraddr rather than proto_setsockaddr and proto_setpeeraddr.
While it's true that sockaddrs are allocated and set, the net effect is
to retrieve (get) the socket address or peer address from a socket, not
set it, so align names to that intent.
and in_setsockaddr(), containing only stale comments on why they
exist, remove them and initialize the protosw for UDP to directly
reference in_setpeeraddr() and in_setsockaddr().
consistent with the naming of other structure field members, and
reducing improper grep matches. Clean up and comment structure
fields in structure definition.
* To use this option with a UDP socket, it must be bound to a local port,
and INADDR_ANY, to disallow possible collisions with existing udp inpcbs
bound to the same port on other interfaces at send time.
* If the socket is bound to INADDR_ANY, specifying IP_SENDSRCADDR with
INADDR_ANY will be rejected as it is ambiguous.
* If the socket is bound to an address other than INADDR_ANY, specifying
IP_SENDSRCADDR with INADDR_ANY will be disallowed by in_pcbbind_setup().
Reviewed by: silence on -net
Tested with: src/tools/regression/netinet/ipbroadcast
MFC after: 4 days
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
function, pru_close, to notify protocols that the file descriptor or
other consumer of a socket is closing the socket. pru_abort is now a
notification of close also, and no longer detaches. pru_detach is no
longer used to notify of close, and will be called during socket
tear-down by sofree() when all references to a socket evaporate after
an earlier call to abort or close the socket. This means detach is now
an unconditional teardown of a socket, whereas previously sockets could
persist after detach of the protocol retained a reference.
This faciliates sharing mutexes between layers of the network stack as
the mutex is required during the checking and removal of references at
the head of sofree(). With this change, pru_detach can now assume that
the mutex will no longer be required by the socket layer after
completion, whereas before this was not necessarily true.
Reviewed by: gnn
( and where appropriate the destruction) of the pcb mutex to the init/finit
functions of the pcb zones.
This allows locking of the pcb entries and race condition free comparison
of the generation count.
Rearrange locking a bit to avoid extra locking operation to update the generation
count in in_pcballoc(). (in_pcballoc now returns the pcb locked)
I am planning to convert pcb list handling from a type safe to a reference count
model soon. ( As this allows really freeing the PCBs)
Reviewed by: rwatson@, mohans@
MFC after: 1 week
for signicantly optimized UDP socket I/O when using a single UDP
socket from many threads or processes that share it, by avoiding
significant locking and other overhead in the general sosend()
path that isn't necessary for simple datagram sockets. Specifically,
this change results in a significant performance improvement for
threaded name service in BIND9 under load.
Suggested by: Jinmei_Tatsuya at isc dot org
the fact that the loop through inpcb's in udp_input() tracks the
last inpcb while looping. We keep that name in the calling loop
but not in the delivery routine itself.
MFC after: 3 months
pru_abort(), pru_detach(), and in_pcbdetach():
- Universally support and enforce the invariant that so_pcb is
never NULL, converting dozens of unnecessary NULL checks into
assertions, and eliminating dozens of unnecessary error handling
cases in protocol code.
- In some cases, eliminate unnecessary pcbinfo locking, as it is no
longer required to ensure so_pcb != NULL. For example, in protocol
shutdown methods, and in raw IP send.
- Abort and detach protocol switch methods no longer return failures,
nor attempt to free sockets, as the socket layer does this.
- Invoke in_pcbfree() after in_pcbdetach() in order to free the
detached in_pcb structure for a socket.
MFC after: 3 months
rather than an error. Detaches do not "fail", they other occur or
the protocol flags SS_PROTOREF to take ownership of the socket.
soclose() no longer looks at so_pcb to see if it's NULL, relying
entirely on the protocol to decide whether it's time to free the
socket or not using SS_PROTOREF. so_pcb is now entirely owned and
managed by the protocol code. Likewise, no longer test so_pcb in
other socket functions, such as soreceive(), which have no business
digging into protocol internals.
Protocol detach routines no longer try to free the socket on detach,
this is performed in the socket code if the protocol permits it.
In rts_detach(), no longer test for rp != NULL in detach, and
likewise in other protocols that don't permit a NULL so_pcb, reduce
the incidence of testing for it during detach.
netinet and netinet6 are not fully updated to this change, which
will be in an upcoming commit. In their current state they may leak
memory or panic.
MFC after: 3 months
than an int, as an error here is not meaningful. Modify soabort() to
unconditionally free the socket on the return of pru_abort(), and
modify most protocols to no longer conditionally free the socket,
since the caller will do this.
This commit likely leaves parts of netinet and netinet6 in a situation
where they may panic or leak memory, as they have not are not fully
updated by this commit. This will be corrected shortly in followup
commits to these components.
MFC after: 3 months
