f/w for the other devices supported by this driver.
Patch linked in https://reviews.freebsd.org/D6967 but not actually
a part of the review.
Obtained from DragonflyBSD.
Submitted by: Kevin Bowling <kev009@kev009.com>
MFC after: 2 weeks
Relnotes: yes
Chelsio NICs are a bit unique compared to some other NICs in that they
expose different functionality on different physical functions. In
particular, PF4 is used to manage the NIC interfaces ('t4nex' and 't5nex').
However, PF4 is not able to create VF devices. Instead, VFs are only
supported by physical functions 0 through 3. This commit adds 't4iov'
and 't5iov' drivers that attach to PF0-3.
One extra wrinkle is that the iov devices cannot enable SR-IOV until the
firwmare has been initialized by the main PF4 driver. To handle this
case, a new t4_if kobj interface has been added to permit cross-calls
between the PF drivers. The PF4 driver notifies sibling drivers when it
is fully attached. It also requests sibling drivers to detach before it
detaches. Sibling drivers query the PF4 driver during their attach
routine to see if it is attached. If not, the sibling drivers defer
their attach actions until the PF4 driver informs them it is attached.
VF devices are associated with a single port on the NIC. VF devices
created from PF0 are associated with the first port on the NIC, VFs
from PF1 are associated with the second port, etc. VF devices can
only be created from a PF device that has an associated port. Thus,
on a 2-port card, VFs are only supported on PF0 and PF1.
Reviewed by: np (earlier versions)
MFC after: 1 month
Sponsored by: Chelsio Communications
* Add acpi_if.h to the SRC list in the uart module
* Only include new acpi headers when they are needed
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
as defined in RFC 6296. The module works together with ipfw(4) and
implemented as its external action module. When it is loaded, it registers
as eaction and can be used in rules. The usage pattern is similar to
ipfw_nat(4). All matched by rule traffic goes to the NPT module.
Reviewed by: hrs
Obtained from: Yandex LLC
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6420
Instead of global variable, vmbus version is accessed through
a vmbus DEVMETHOD now.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6953
FreeBSD support NX bit on X86_64 processors out of the box, for i386 emulation
use READ_IMPLIES_EXEC flag, introduced in r302515.
While here move common part of mmap() and mprotect() code to the files in compat/linux
to reduce code dupcliation between Linuxulator's.
Reported by: Johannes Jost Meixner, Shawn Webb
MFC after: 1 week
XMFC with: r302515, r302516
This follows NTB subsystem modularization in Linux, tuning it to FreeBSD
native NewBus interfaces. This change allows to support different types
of hardware with different drivers, support multiple NTB instances in a
system, ntb_transport module use for needs other then if_ntb, etc.
Sponsored by: iXsystems, Inc.
default. At least initially, the feature to support multiple TCP stacks is
aimed at supporting advanced use cases and TCP development, but it is not
necessarily aimed at a wide audience. Therefore, there is no need to build
and install the extra TCP stacks by default. Instead, the people who are
using or developing this functionality can add the extra option to build/
install the extra TCP stacks.
However, we do want to build the extra TCP stacks as part of test builds
(e.g. LINT or tinderbox) to ensure that developers who are testing their
changes will know that their changes do not break the additional TCP
stack modules.
After this change, a user will need to add WITH_EXTRA_TCP_STACKS=1 to
make.conf or the kernel config in order to build the extra TCP modules.
Differential Revision: https://reviews.freebsd.org/D6795
Reviewed by: sjg
Approved by: re (kib)
Support for compression has been available from July 2007 but it
was never imported due to concerns with patents once held by
STAC/HiFn. The issues have clearly been resolved so bring it
in now.
Special thanks to Brett Glass for preserving the code and
pointing documentation for the expiration case.
Obtained from: mav (through Brett Glass)
Relnotes: yes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6739
This change is needed because 'opt_rss.h' is included by multiple source
files and RSS macro is defined as 1 within the file during build process
if option RSS is enabled in the kernel.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D6718
This is the initial framework to call into the MCI HAL routines and drive
the basic state engine.
The MCI bluetooth coex model uses a command channel between wlan and
bluetooth, rather than a 2-wire or 3-wire signaling protocol to control things.
This means the wlan and bluetooth chip exchange a lot more information and
signaling, even at the per-packet level. The NICs in question can share
the input LNA and output PA on the die, so they absolutely can't stomp
on each other in a silly fashion. It also allows for the bluetooth side
to signal when profiles come and go, so the driver can take appropriate
control. There's also the possibility of dynamic bluetooth/wlan duty cycle
control which I haven't yet really played with.
It configures things up with a static "wlan wins everything" coexistence,
configures up the available 2GHz channel map for bluetooth, sets a static
duty cycle for bluetooth/wifi traffic priority and drives the basics needed to
keep the MCI HAL code happy.
It doesn't do any actual coexistence except to default to "wlan wins everything",
which at least demonstrates that things do indeed work. Bluetooth inquiry frames
still trump wifi (including beacons), so that demonstrates things really do
indeed seem to work.
Tested:
* AR9462 (WB222), STA mode + bt
* QCA9565 (WB335), STA mode + bt
TODO:
* .. the rest of coexistence. yes, bluetooth, not people. That stuff's hard.
* It doesn't do the initial BT side calibration, which requires a WLAN chip
reset. I'll fix up the reset path a bit more first before I enable that.
* The 1-ant and 2-ant configuration bits aren't being set correctly in
if_ath_btcoex.c - I'll dig into that and fix it in a subsequent commit.
* It's not enabled by default for WB222/WB225 even though I believe it now
can be - I'll chase that up in a subsequent commit.
Obtained from: Qualcomm Atheros, Linux ath9k
Support for the new hashing algorithms in ZFS was introduced in r289422
However it was disconnected because FreeBSD lacked implementations of
SHA-512 (truncated to 256 bits), and Skein.
These implementations were introduced in r300921 and r300966 respectively
This commit connects them to ZFS and enabled these new checksum algorithms
This new algorithms are not supported by the boot blocks, so do not use them
on your root dataset if you boot from ZFS.
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Connect it to userland (libmd, libcrypt, sbin/md5) and kernel (crypto.ko)
Support for skein as a ZFS checksum algorithm was introduced in r289422
but is disconnected because FreeBSD lacked a Skein implementation.
A further commit will enable it in ZFS.
Reviewed by: cem
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D6166
includes the FDT option. Use OPT_FDT to conditionally compile modules
that require FDT support.
In the past we've gotten away with using the arch name as a proxy for FDT
support in makefile conditional logic, but now mips has some platforms with
fdt support and some without and we need a more direct test.
Centre for Advanced Internet Architectures
Implementing AQM in FreeBSD
* Overview <http://caia.swin.edu.au/freebsd/aqm/index.html>
* Articles, Papers and Presentations
<http://caia.swin.edu.au/freebsd/aqm/papers.html>
* Patches and Tools <http://caia.swin.edu.au/freebsd/aqm/downloads.html>
Overview
Recent years have seen a resurgence of interest in better managing
the depth of bottleneck queues in routers, switches and other places
that get congested. Solutions include transport protocol enhancements
at the end-hosts (such as delay-based or hybrid congestion control
schemes) and active queue management (AQM) schemes applied within
bottleneck queues.
The notion of AQM has been around since at least the late 1990s
(e.g. RFC 2309). In recent years the proliferation of oversized
buffers in all sorts of network devices (aka bufferbloat) has
stimulated keen community interest in four new AQM schemes -- CoDel,
FQ-CoDel, PIE and FQ-PIE.
The IETF AQM working group is looking to document these schemes,
and independent implementations are a corner-stone of the IETF's
process for confirming the clarity of publicly available protocol
descriptions. While significant development work on all three schemes
has occured in the Linux kernel, there is very little in FreeBSD.
Project Goals
This project began in late 2015, and aims to design and implement
functionally-correct versions of CoDel, FQ-CoDel, PIE and FQ_PIE
in FreeBSD (with code BSD-licensed as much as practical). We have
chosen to do this as extensions to FreeBSD's ipfw/dummynet firewall
and traffic shaper. Implementation of these AQM schemes in FreeBSD
will:
* Demonstrate whether the publicly available documentation is
sufficient to enable independent, functionally equivalent implementations
* Provide a broader suite of AQM options for sections the networking
community that rely on FreeBSD platforms
Program Members:
* Rasool Al Saadi (developer)
* Grenville Armitage (project lead)
Acknowledgements:
This project has been made possible in part by a gift from the
Comcast Innovation Fund.
Submitted by: Rasool Al-Saadi <ralsaadi@swin.edu.au>
X-No objection: core
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6388
written by Sagi Grimberg <sagig at mellanox.com> and Max Gurtovoy
<maxg at mellanox.com>.
This code comes from https://github.com/sagigrimberg/iser-freebsd, branch
iser-rebase-11-current-r291993. It's not connected to the build just yet;
it still needs some tweaks to adapt to my changes to iSCSI infrastructure.
Big thanks to Mellanox for their support for FreeBSD!
Obtained from: Mellanox Technologies
MFC after: 1 month
Relnotes: yes
This patchset adds support to bhnd_chipc for sharing SYS_RES_MEMORY
resources with its children, allowing us to hang devices off of
bhnd_chipc that rely on access to a subset of the device register space
that bhnd_chipc itself must also allocate.
We could avoid most of this heavy lifting if RF_SHAREABLE+SYS_RES_MEMORY
wasn't limited to use with allocations at the same size/offset.
As a work-around, I implemented something similar to vga_pci.c, which
implements similar reference counting of of PCI BAR resources for its
children.
With these changes, chipc will use reference counting of SYS_RES_MEMORY
allocation/activation requests, to decide when to allocate/activate/
deactivate/release resources from the parent bhnd(4) bus.
The requesting child device is allocated a new resource from chipc's
rman, pointing to (possibly a subregion of) the refcounted bhnd resources
allocated by chipc.
Other resource types are just passed directly to the parent bhnd bus;
RF_SHAREABLE works just fine with IRQs.
I also lifted the SPROM device code out into a common driver, since this
now allows me to hang simple subclasses off of a common driver off of both
bhndb_pci and bhnd_chipc.
Tested:
* (landonf) Tested against BCM4331 and BCM4312, confirmed that SPROM still
attaches and can be queried.
Submitted by: Landon Fuller <landonf@landonf.org>
Reviewed by: mizkha@gmail.com
Differential Revision: https://reviews.freebsd.org/D6471
