Add more mmap tests related to character devices.
- Add cdev-related tests for bad args.
- Add two simple tests cases for mapping /dev/zero that test for
MAP_ANON-like behavior.
Add various tests to ensure that invalid arguments passed to mmap()
trigger failures.
Note: most of the tests that should provoke an EINVAL error do not
pass on stable/10 as stable/10 does not have the changes that added
more strict parameter checking to mmap(). Those changes will not be
merged to stable/10, so I have disabled them via #if 0 with a comment
explaining why.
Various fixes to orphan handling which also fix issues with following
forks.
283281:
Always set p_oppid when attaching to an existing process via procfs
tracing. This matches the behavior of ptrace(PT_ATTACH). Also,
the procfs detach request assumes p_oppid is always set.
283282:
Only reparent a traced process to its old parent if the tracing process is
not the old parent. Otherwise, proc_reap() will leave the zombie in place
resulting in the process' status being returned twice to its parent.
Add test cases for PT_TRACE_ME and PT_ATTACH which are fixed by
this change.
283562:
Do not allow a process to reap an orphan (a child currently being
traced by another process such as a debugger). The parent process does
need to check for matching orphan pids to avoid returning ECHILD if an
orphan has exited, but it should not return the exited status for the
child until after the debugger has detached from the orphan process
either explicitly or implicitly via wait().
Add two tests for for this case: one where the debugger is the direct
child (thus the parent has a non-empty children list) and one where
the debugger is not a direct child (so the only "child" of the parent
is the orphan).
283647:
Tweak the description of when waitpid() doesn't return any status for a
non-blocking wait to avoid the word "empty".
283836:
Consistently only use one end of the pipe in the parent and debugger
processes and do not rely on EOF due to a close() in the debugger.
284000:
Add a CHILD_REQUIRE macro similar to ATF_REQUIRE for use in child processes
of the main test process.
286158:
Clear P_TRACED before reparenting a detached process back to its
original parent. Otherwise the debugee will be set as an orphan of
the debugger.
Add tests for tracing forks via PT_FOLLOW_FORK.
r277627 (by will):
Add routing_test:static_ipv6_loopback_route_for_each_fib.
It tests that all FIBs get a static IPv6 loopback route.
Submitted by: asomers
Sponsored by: Spectra Logic
MFSpectraBSD: 1048456 on 2014/03/13
1114523 on 2015/01/23
r277650 (by will):
Add tests/etc/rc.d to mtree.
Submitted by: stefanf
MFC with: 277627
r282059:
Move etc/tests/rc.d to etc/rc.d/tests to match the directory layout jmmv@
documented and implemented in other areas of the FreeBSD tree
r283056:
Move all test integration pieces for etc/ from etc/ to tests/
This is being done to fix breakage with make distribution with read-only
source trees as make distribution doesn't use make obj like building
tests/ does in all cases
Reported by: Wolfgang Zenker <wolfgang@lyxys.ka.sub.org>
Suggested by: jhb
r283840:
Remove empty tests directory
r283845:
Append to SUBDIR, not set it
Pointyhat to: ngie
r262781 (by pho):
Preserve naming consistency for test cases.
Pointed out by: jmmv
Sponsored by: EMC / Isilon storage division
r263336 (by pho):
Added sysctl kern.maxfiles increase test, do not use /etc/passwd for tests
and use volatile sig_atomic_t for signal handler variable.
Reviewed by: asomers (previous version)
Sponsored by: EMC / Isilon storage division
r282211:
ATF_REQUIRE_KERNEL_MODULE: use atf_skip, not ATF_REQUIRE_MSG so the testcase
no longer bombs out
PLAIN_REQUIRE_KERNEL_MODULE: use printf + _exit, no err so the testcase no
longer bombs out if it prints to stderr
r282244:
Fix typo. It should have been atf_tc_skip, not atf_skip
Reported by: many, Jenkins
Pointyhat to: ngie
r282071:
Integrate tools/regression/mqueue into the FreeBSD test suite as
tests/sys/mqueue
r282074:
Integrate tools/regression/aio/aiotest and tools/regression/aio/kqueue into the
FreeBSD test suite as tests/sys/aio
r282133:
Fill in the copyright boilerplate for the test program
r282134:
Add initial (unpolished) macros for interfacing with the FreeBSD test suite
This is very rough, but will be replaced/redesigned some time soon after I fix
the Jenkins breakage I introduced
r282135:
Use ATF_REQUIRE_KERNEL_MODULE instead of aio_available function
r282136:
- Use ATF_REQUIRE_KERNEL_MDOULE to require aio(4)
- Don't use /tmp as a basis for temporary files as it's outside of the ATF
sandbox
- Don't override MAX macro in sys/param.h
r282137:
Use PLAIN_REQUIRE_KERNEL_MODULE to require "mqueuefs"
r282138:
Adjust CFLAGS to find freebsd_test_suite/macros.h
r282076:
Integrate tools/regression/mmap into the FreeBSD test suite as
tests/sys/kern/mmap_test
r282104:
Move tests/sys/kern/mmap_test to tests/sys/vm/mmap_test
As jhb noted, the actual mmap(2) implementation is under sys/vm, not
sys/kern/, so the correct logical place is tests/sys/vm/, not
tests/sys/kern/
r262526 (by pho):
Added a regression test for r234131.
Discussed with: asomers
Sponsored by: EMC / Isilon storage division
r262730 (by pho):
Changed name of test case to a more descriptive one and moved
comment to the "descr" property.
Suggested by: jmmv
Sponsored by: EMC / Isilon storage division
r264400:
NO_MAN= has been deprecated in favor of MAN= for some time, go ahead
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
r265836:
Remove last two NO_MAN= in the tree. In both of these cases, MAN= is
what is needed.
r272057:
Import pjdfstest from ^/vendor/pjdfstest/abf03c3a47745d4521b0e4aa141317553ca48f91
- Remove tools/regression/pjdfstest
- Add upgrade directions for contrib/pjdfstest
- Add a note to UPDATING for the move (the reachover Makefiles are coming
soon)
Functional differences:
- ftruncate testcases are added from upstream (github)
Non-functional differences:
- The copyright for the project has been updated to 2012
- pjd's contact information has been updated
Discussed with: -testing, jmmv, pjd
Sponsored by: EMC / Isilon Storage Division
r272083:
Expect ELOOP on Darwin/Linux with "O_NOFOLLOW was specified and the target is a
symbolic link" case. Assume EMLINK on the rest of the OSes (FreeBSD, Solaris,
etc)
Sponsored by: EMC / Isilon Storage Division
r272084:
Fix the executed testplan count
Sponsored by: EMC / Isilon Storage Division
r272087:
Increase the memory disk size in the following testcases to avoid mount
failures, which would cause cascade failures in the rest of the test
run:
link/15.t, open/19.t, mkdir/11.t, mkfifo/11.t, symlink/11.t
Fail quickly in all of the testcases if mdconfig, mount, umount, etc
fails to avoid issues similar to this in the future
Submitted by: Casey Peel <cpeel@isilon.com>
Sponsored by: EMC / Isilon Storage Division
r274016:
Integrate pjdfstest test suite execution into kyua
pjdfstest execution is opt-in and must be done as root due to some of the
assumptions made by the test suite and lack of error checking in the non-root
case
A description of how to execute pjdfstest with kyua is provided in
share/pjdfstest/README
Phabric: D824 (an earlier prototype patch)
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
Remove explicit KYUAFILE=yes from tests/sys/Makefile
This causes the directory traversing Kyuafile to be installed, which in turn
causes tests/sys/pjdfstest to always be run from /usr/tests/sys
Let KYUAFILE default to auto, so the file generated by suite.test.mk gets
installed instead
Use PROGS instead of PROG and remove unnecessary SRCS?= assignment
Using PROG instead of PROGS will in cases of high -j with -DNO_ROOT cause
the PROG to show up more than once as it's handling the SCRIPTS install case
in a recursive manner, separate from the non-recursive case
After the recent batch of commits to bsd.progs.mk to fix behavior with how
variables are defaulted to, explicitly setting SRCS for a PROG is no longer
required
Reviewed by: asomers
Phabric: D1130
Sponsored by: EMC / Isilon Storage Division
panic when you attempt to remove the IP address. But it still fails to
remove the address.
MFC r265094
Add regression test for PR kern/189088.
MFC r265092
Fix a panic when removing an IP address from an interface, if the same
address exists on another interface. The panic was introduced by change
264887, which changed the fibnum parameter in the call to rtalloc1_fib() in
ifa_switch_loopback_route() from RT_DEFAULT_FIB to RT_ALL_FIBS. The
solution is to use the interface fib in that call. For the majority of
users, that will be equivalent to the legacy behavior.
Fix host and network routes for new interfaces when net.add_addr_allfibs=0
sys/net/route.c
In rtinit1, use the interface fib instead of the process fib. The
latter wasn't very useful because ifconfig(8) is usually invoked
with the default process fib. Changing ifconfig(8) to use setfib(2)
would be redundant, because it already sets the interface fib.
tests/sys/netinet/fibs_test.sh
Clear the expected ATF failure
sys/net/if.c
Pass the interface fib in calls to rtrequest1_fib and rtalloc1_fib
sys/netinet/in.c
sys/net/if_var.h
Add a fibnum argument to ifa_switch_loopback_route, a subroutine of
in_scrubprefix. Pass it the interface fib.
with addresses on the same subnet.
MFC r266860
Fix unintended KBI change from r264905. Add _fib versions of
ifa_ifwithnet() and ifa_ifwithdstaddr() The legacy functions will call the
_fib() versions with RT_ALL_FIBS, preserving legacy behavior.
sys/net/if_var.h
sys/net/if.c
Add legacy-compatible functions as described above. Ensure legacy
behavior when RT_ALL_FIBS is passed as fibnum.
sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/net/route.c
sys/net/rtsock.c
sys/netinet6/nd6.c
Call with _fib() functions if we must use a specific fib, or the
legacy functions otherwise.
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
Improve the udp_dontroute test. The bug that this test exercises is
that ifa_ifwithnet() will return the wrong address, if multiple
interfaces have addresses on the same subnet but with different
fibs. The previous version of the test only considered one possible
failure mode: that ifa_ifwithnet_fib() might fail to find any
suitable address at all. The new version also checks whether
ifa_ifwithnet_fib() finds the correct address by checking where the
ARP request goes.
MFC r264917
Style fixes, mostly trailing whitespace elimination. No functional change.
MFC r264905
Fix subnet and default routes on different FIBs on the same subnet.
These two bugs are closely related. The root cause is that ifa_ifwithnet
does not consider FIBs when searching for an interface address.
sys/net/if_var.h
sys/net/if.c
Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those
functions will only return an address whose interface fib equals the
argument.
sys/net/route.c
Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib
arguments.
sys/netinet/in.c
Update in_addprefix to consider the interface fib when adding
prefixes. This will prevent it from not adding a subnet route when
one already exists on a different fib.
sys/net/rtsock.c
sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/netinet6/nd6.c
Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet.
In some cases it there wasn't a clear specific fib number to use.
In others, I was unable to test those functions so I chose
RT_DEFAULT_FIB to minimize divergence from current behavior. I will
fix some of the latter changes along with PR kern/187553.
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
tests/sys/netinet/Makefile
Revert r263738. The udp_dontroute test was right all along.
However, bugs kern/187550 and kern/187553 cancelled each other out
when it came to this test. Because of kern/187553, ifa_ifwithnet
searched the default fib instead of the requested one, but because
of kern/187550, there was an applicable subnet route on the default
fib. The new test added in r263738 doesn't work right, however. I
can verify with dtrace that ifa_ifwithnet returned the wrong address
before I applied this commit, but route(8) miraculously found the
correct interface to use anyway. I don't know how.
Clear expected failure messages for kern/187550 and kern/187552.
MFC r263738
tests/sys/netinet/Makefile
tests/sys/netinet/fibs.sh
Replace fibs:udp_dontroute with fibs:src_addr_selection_by_subnet.
The original test was poorly written; it was actually testing
kern/167947 instead of the desired kern/187553. The root cause of the
bug is that ifa_ifwithnet did not have a fib argument. The new test
more directly targets that behavior.
tests/sys/netinet/udp_dontroute.c
Delete the auxilliary binary used by the old test
Correct ARP update handling when the routes for network interfaces are
restricted to a single FIB in a multifib system.
Restricting an interface's routes to the FIB to which it is assigned (by
setting net.add_addr_allfibs=0) causes ARP updates to fail with "arpresolve:
can't allocate llinfo for x.x.x.x". This is due to the ARP update code hard
coding it's lookup for existing routing entries to FIB 0.
sys/netinet/in.c:
When dealing with RTM_ADD (add route) requests for an interface, use
the interface's assigned FIB instead of the default (FIB 0).
sys/netinet/if_ether.c:
In arpresolve(), enhance error message generated when an
lla_lookup() fails so that the interface causing the error is
visible in logs.
tests/sys/netinet/fibs_test.sh
Clear ATF expected error.
r265385 does not need to be MFCed, because the obsolete files in question
were never MFCed to any stable branch.
r265385
Remove the ifconfig test added in rev 263445. After discussion with
melifaro, we agreed that ifconfig's behavior was not a bug. The main
motivation for bin/187551 was to partially resolve kern/187549, but we
resolved kern/187549 in a different way instead.
ObsoleteFiles.inc
etc/mtree/BSD.tests.dist
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Remove /usr/tests/sbin/ifconfig
r263445
Add several ATF tests that deal with multiple fibs. They're described in
several different PRs, but the tests share some common code, so I'm
committing them together.
sbin/ifconfig/tests
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Add fibs_test.sh, which regresses bin/187551
tests/sys/netinet
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
tests/sys/netinet/Makefile
tests/sys/Makefile
Add fibs_test.sh, which regresses kern/167947, kern/187552
kern/187549, kern/187550, and kern/187553
etc/mtree/BSD.tests.dist
Add newly created directories
- r263161 Make bsd.test.mk the only public mk fragment for the building of tests.
- r263172 Move FreeBSD Test Suite-specific code to a suite.test.mk file.
- r263204 Add some documentation for bsd.test.mk.
- r263217 Document support for TAP-compliant Perl test programs.
This is "make tinderbox" clean.
Replace 4.4BSD Lite's unix domain socket backpressure hack with a cleaner
mechanism, based on the new SB_STOP sockbuf flag. The old hack dynamically
changed the sending sockbuf's high water mark whenever adding or removing
data from the receiving sockbuf. It worked for stream sockets, but it never
worked for SOCK_SEQPACKET sockets because of their atomic nature. If the
sockbuf was partially full, it might return EMSGSIZE instead of blocking.
The new solution is based on DragonFlyBSD's fix from commit
3a6117bbe0ed6a87605c1e43e12a1438d8844380 on 2008-05-27. It adds an SB_STOP
flag to sockbufs. Whenever uipc_send surpasses the socket's size limit, it
sets SB_STOP on the sending sockbuf. sbspace() will then return 0 for that
sockbuf, causing sosend_generic and friends to block. uipc_rcvd will
likewise clear SB_STOP. There are two fringe benefits: uipc_{send,rcvd} no
longer need to call chgsbsize() on every send and receive because they don't
change the sockbuf's high water mark. Also, uipc_sense no longer needs to
acquire the UIPC linkage lock, because it's simpler to compute the
st_blksizes.
There is one drawback: since sbspace() will only ever return 0 or the
maximum, sosend_generic will allow the sockbuf to exceed its nominal maximum
size by at most one packet of size less than the max. I don't think that's
a serious problem. In fact, I'm not even positive that FreeBSD guarantees a
socket will always stay within its nominal size limit.
sys/sys/sockbuf.h
Add the SB_STOP flag and adjust sbspace()
sys/sys/unpcb.h
Delete the obsolete unp_cc and unp_mbcnt fields from struct unpcb.
sys/kern/uipc_usrreq.c
Adjust uipc_rcvd, uipc_send, and uipc_sense to use the SB_STOP
backpressure mechanism. Removing obsolete unpcb fields from
db_show_unpcb.
tests/sys/kern/unix_seqpacket_test.c
Clear expected failures from ATF.
Fix PR kern/185813 "SOCK_SEQPACKET AF_UNIX sockets with asymmetrical buffers
drop packets". It was caused by a check for the space available in a
sockbuf, but it was checking the wrong sockbuf.
sys/sys/sockbuf.h
sys/kern/uipc_sockbuf.c
Add sbappendaddr_nospacecheck_locked(), which is just like
sbappendaddr_locked but doesn't validate the receiving socket's space.
Factor out common code into sbappendaddr_locked_internal(). We
shouldn't simply make sbappendaddr_locked check the space and then call
sbappendaddr_nospacecheck_locked, because that would cause the O(n)
function m_length to be called twice.
sys/kern/uipc_usrreq.c
Use sbappendaddr_nospacecheck_locked for SOCK_SEQPACKET sockets,
because the receiving sockbuf's size limit is irrelevant.
tests/sys/kern/unix_seqpacket_test.c
Now that 185813 is fixed, pipe_128k_8k fails intermittently due to
185812. Make it fail every time by adding a usleep after starting the
writer thread and before starting the reader thread in test_pipe. That
gives the writer time to fill up its send buffer. Also, clear the
expected failure message due to 185813. It actually said "185812", but
that was a typo.
PR: kern/185813
Only use -lpthread for unix_seqpacket_test, not for all test programs.
MFC r262894
kern/Makefile
Set WARNS=5 for all files in this directory
kern/unix_seqpacket_test.c
Fix compiler warnings. Most were benign, but rcvbuf_oversized
wasn't working as intended because I forgot to set the buffer sizes.
test_eagain_*_* should've been using nonblocking sockets instead of blocking
sockets. The error was not exposed as long as the kernel suffered from PR
kern/185812. Now corrected, these tests pass on DragonFlyBSD 3.6.0.
r261081
Replace the old unix_seqpacket and unix_seqpacket_exercise
tests, which were a little broken and not automatable, with
unix_seqpacket_test. It's coverage is a superset of the old
tests and it uses ATF. It includes test cases for bugs
kern/185813 and kern/185812.
r261133
Fix the Makefiles so that the tests I submitted in r261081 will
actually get built.
r261615
tests/sys/Makefile
use TESTS_SUBDIRS for kern instead of SUBDIRS. I don't
think it makes a difference in this case, but
TESTS_SUBDIRS is generally correct for subdirectories
that contain tests.
This is a MFC of the following into stable/10:
- r257097 Set up the /usr/tests hierarchy.
- r257098 Add missing WITHOUTTESTS file.
- r257100 Add a tests(7) manual page.
- r257105 Disable WITHTESTS= for now.
- r257848 Fix buildworld when WITHTESTS is enabled.
- r257850 Subsume the functionality of MKATF into MKTESTS.
- r257851 Handle the removal of the test suite when WITHOUTTESTS=yes.
- r257852 Install category Kyuafiles from their category directories.
- r258232 Install BSD.tests.mtree when MKTESTS is yes.
Note that building with WITH_TESTS is still broken at this point (and
hence why WITHOUT_TESTS is the set as the default). Subsequent pullups
will fix the remaining issues.
