In r208737 jmallett@ added support for the "mips64r2" architecture
and "octeon" CPU, and the saa/saad instructions.
Upstream binutils also added the "octeon+" CPU, and the saa/saad
instructions are only available in octeon+, not octeon. Since our
base system tool chain already accepts saa/saad with -march=octeon,
just allow octeon+ as an alias.
This allows the use of octeon+ in kernel config files, for use with both
external tool chain and in-tree GCC/binutils.
PR: 216516
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Recommit "Use ValueOffsetPair to enhance value reuse during SCEV
expansion".
The fix for PR28705 will be committed consecutively.
In D12090, the ExprValueMap was added to reuse existing value during
SCEV expansion. However, const folding and sext/zext distribution can
make the reuse still difficult.
A simplified case is: suppose we know S1 expands to V1 in
ExprValueMap, and
S1 = S2 + C_a
S3 = S2 + C_b
where C_a and C_b are different SCEVConstants. Then we'd like to
expand S3 as V1 - C_a + C_b instead of expanding S2 literally. It is
helpful when S2 is a complex SCEV expr and S2 has no entry in
ExprValueMap, which is usually caused by the fact that S3 is
generated from S1 after const folding.
In order to do that, we represent ExprValueMap as a mapping from SCEV
to ValueOffsetPair. We will save both S1->{V1, 0} and S2->{V1, C_a}
into the ExprValueMap when we create SCEV for V1. When S3 is
expanded, it will first expand S2 to V1 - C_a because of S2->{V1,
C_a} in the map, then expand S3 to V1 - C_a + C_b.
Differential Revision: https://reviews.llvm.org/D21313
Pull in r278161 from upstream llvm trunk (by Wei Mi):
Fix the runtime error caused by "Use ValueOffsetPair to enhance value
reuse during SCEV expansion".
The patch is to fix the bug in PR28705. It was caused by setting
wrong return value for SCEVExpander::findExistingExpansion. The
return values of findExistingExpansion have different meanings when
the function is used in different ways so it is easy to make mistake.
The fix creates two new interfaces to replace
SCEVExpander::findExistingExpansion, and specifies where each
interface is expected to be used.
Differential Revision: https://reviews.llvm.org/D22942
Pull in r281439 from upstream llvm trunk (by Wei Mi):
Create a getelementptr instead of sub expr for ValueOffsetPair if the
value is a pointer.
This patch is to fix PR30213. When expanding an expr based on
ValueOffsetPair, if the value is of pointer type, we can only create
a getelementptr instead of sub expr.
Differential Revision: https://reviews.llvm.org/D24088
This should fix assertion failures when building OpenCV >= 3.1, and also
allow building lang/spidermonkey24 without any further assertions.
PR: 215649
MFC after: 1 week
under a shared read lock. This patch attempts to upgrade the lock to
an exclusive write lock. If the exclusive write lock fails to be
obtained, the current fragment is not placed at the head of the list.
This portion of the patch was inspired by NetBSD ip_frag.c r1.4 (which
effectively removed the section of code that performed the reordering).
The patch to sys/contrib/ipfilter/netinet/ip_compat.h adds the
MUTEX_TRY_UPGRADE macro to support the patch to ip_frag.c.
The patch to contrib/ipfilter/lib/rwlock_emul.c supports this patch
by emulating the mutex in userspace when exercised by ipftest(1).
Inspired by: NetBSD ip_frag.c r1.4
MFC after: 1 month
Use ValueOffsetPair to enhance value reuse during SCEV expansion.
In D12090, the ExprValueMap was added to reuse existing value during
SCEV expansion. However, const folding and sext/zext distribution can
make the reuse still difficult.
A simplified case is: suppose we know S1 expands to V1 in
ExprValueMap, and
S1 = S2 + C_a
S3 = S2 + C_b
where C_a and C_b are different SCEVConstants. Then we'd like to
expand S3 as V1 - C_a + C_b instead of expanding S2 literally. It is
helpful when S2 is a complex SCEV expr and S2 has no entry in
ExprValueMap, which is usually caused by the fact that S3 is
generated from S1 after const folding.
In order to do that, we represent ExprValueMap as a mapping from SCEV
to ValueOffsetPair. We will save both S1->{V1, 0} and S2->{V1, C_a}
into the ExprValueMap when we create SCEV for V1. When S3 is
expanded, it will first expand S2 to V1 - C_a because of S2->{V1,
C_a} in the map, then expand S3 to V1 - C_a + C_b.
Differential Revision: https://reviews.llvm.org/D21313
This should fix assertion failures when building OpenCV >= 3.1.
PR: 215649
MFC after: 3 days
Note that mandoc does not use anymore sqlite3 but a home made database format
An important improvement has been made as well in makewhatis performance:
Tests on my laptop shows makewhatis on the entire system goes from 26s to 12s
to a non-wildcard address. As documented in ip(4), doing sendmsg(2) with
IP_SENDSRCADDR on a socket that is bound to non-wildcard address is
completely different to using this control message on a wildcard one.
A fix is to add a bool to mark whether we did setsockopt(IP_RECVDSTADDR)
on the socket, and use IP_SENDSRCADDR control message only if we did.
While here, garbage collect absolutely useless udp_recv() function that
establishes some structures on stack to never use them later.
This contains some new testcases in /usr/tests/...:
- .../lib/libc
- .../lib/libthr
- .../lib/msun
- .../sys/kern
Tested on: amd64, i386
MFC after: 1 month
This also (inadvertently) contains an update to
contrib/netbsd-tests/lib/libc/sys/t_wait.c (new testcases).
MFC after: 2 weeks
In collaboration with: christos@NetBSD.org
There's no sense in trying to close a file descriptor from the negative cases
with unlink_test; it's best to ignore these cases.
The mkfifo case does make sense to keep though.
MFC after: 3 days
Sync libarchive with vendor.
Vendor bugfixes:
#691: Support for SCHILY.xattr extended attributes
#854: Spelling fixes
Multiple fixes in ACL code:
- prefer acl_set_fd_np() to acl_set_fd()
- if acl_set_fd_np() fails, do no fallback to acl_set_file()
- do not warn if trying to write ACLs to a filesystem without ACL support
- fix id handling in archive_acl_(from_to)_text*() for NFSv4 ACLs
MFC after: 1 week
X-MFC with: r310866
when dereferencing a NULL pointer later on.
Choose to just check for the NULL pointer in the next for-loop for now to fix
the issue with a minimal amount of code churn
sys/queue.h use here would make more sense than using a static table
MFC after: 5 days
This avoids a segfault with malformed or unanticipated files,
like IPV6-TC.txt (a file containing just TEXTUAL-CONVENTIONS).
MFC after: 5 days
Found with: gensnmpdef /usr/local/share/snmp/mibs/IPV6-TC.txt
contrib/ngatm/snmp_atm/snmp_atm.c:173:6: error: logical not is only
applied to the left hand side of this bitwise operator
[-Werror,-Wlogical-not-parentheses]
if (!ifmr.ifm_status & IFM_AVALID) {
^ ~
Obviously, the masking needs to be done before the logical not
operation. Add parentheses to make it so.
MFC after: 3 days
addresses of members of struct ip, which is packed. Since the pointers
are only used for memcmp'ing, they can be pointing to void instead.
Note that upstream has removed the src and dst variables, in the mean
time.
MFC after: 3 days
prototypes in <tcpd.h> use FILE. Pull in a minimal forward declaration
of FILE from <stdio.h> to minimize impact. Sorry for the breakage.
Reported by: Shawn Webb <shawn.webb@hardenedbsd.org>
X-MFC-With: r311459
Clang 4.0.0 complains about tcpd.h's not-really-prototypes, e.g.:
/usr/include/tcpd.h:75:24: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
extern int hosts_access(); /* access control */
^
To fix this, turn these declarations into real prototypes. While here,
garbage collect the incompatible rfc931() function from scaffold.c, as
it is never used.
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9052
Add an XXX comment to note that the conditional seems suspect given
how it's handled elsewhere in the SNMP_OP_SET case.
MFC after: 2 weeks
Reported by: Coverity
CID: 1008573
