Early in the arm64 pmap code we need to translate between a virtual
address and a physical address. Rather than manually walking the page
table we can ask the hardware to do it for us.
Reviewed by: kib, markj
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D30357
- Process the list of local IPs once instead of once per adapter. Add
addresses from all VNETs to the driver's list but leave hardware
updates for later when the global VNET/IFADDR list locks have been
released.
- Add address to the hardware table synchronously when a CLIP entry is
requested for an address that's not already in there.
- Provide ioctls that allow userspace tools to manage addresses in the
CLIP table.
- Add a knob (hw.cxgbe.clip_db_auto) that controls whether local IPs are
automatically added to the CLIP table or not.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
This fixes inability to start USB xfers in a case when FIFO has been
already open()-ed but no read() or poll() calls has been issued yet.
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30343
This fixes lose of evdev events after moused has been killed.
While here use bitwise operations for UMS_EVDEV_OPENED flag.
Reviewed by: hselasky
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30342
With this patch:
% dmesg | grep -i uart
uart2: <Intel Gemini Lake SIO/LPSS UART 0> mem 0xa1426000-0xa1426fff,0xa1425000-0xa1425fff irq 4 at device 24.0 on pci0
uart3: <Intel Gemini Lake SIO/LPSS UART 1> mem 0xa1424000-0xa1424fff,0xa1423000-0xa1423fff irq 5 at device 24.1 on pci0
uart4: <Intel Gemini Lake SIO/LPSS UART 2> mem 0xfea10000-0xfea10fff irq 6 at device 24.2 on pci0
uart5: <Intel Gemini Lake SIO/LPSS UART 3> mem 0xa1422000-0xa1422fff,0xa1421000-0xa1421fff irq 7 at device 24.3 on pci0
PR: 256101
Submitted by: Daniel Ponte <amigan@gmail.com>
MFC after: 1 week
Else recursive use of EPOCH(9) may cause the wrong priority to be restored.
Bump the __FreeBSD_version due to changing the thread and epoch tracker
structure.
Differential Revision: https://reviews.freebsd.org/D30375
Reviewed by: markj@
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
It turns out that, silly adrian, setting it to 64 means only two
AMPDU frames of 32 subframes each. Thus, whilst those are in-flight,
any subsequent queues frames to that node get dropped.
This ends up being pretty no bueno for performance if any receive
is also going on at that point.
Instead, set it to 128 for the time being to ensure that SOME
frames get queued in the meantime. This results in some frames
being immediately available in the software queue for transmit
when the two existing A-MPDU frames have been completely sent,
rather than the queue remaining empty until at least one is sent.
It's not the best solution - I still think I'm scheduling receive
far more often than giving time to schedule transmit work -
but at least now I'm not starving the transmit side.
Before this, a bidirectional iperf would show receive at ~ 150mbit/sec.
but the transmit side at like 10kbit/sec. With it set to 128 it's
now 150mbit/sec receive, and ~ 10mbit receive. It's better than 10kbit/sec,
but still not as far as I'd like it to be.
Tested:
* AR9380/QCA934x (TL-WDR4300 AP), Macbook pro test STA + AR9380 test STA
I've been using STA+AP modes at home for a couple years now
and I've been finding and fixing a lot of weird corner cases.
This is the eventual patchset I've landed on.
* Don't force beacon resync in STA mode if we're using sw beacon tracking.
This stops a variety of stomping issues when the STA VAP is reconfigured;
the AP hardware beacons were being stomped on!
* Use the first AP VAP to configure beacons on, rather than the first VAP.
This prevents weird behaviour in ath_beacon_config() when the hardware
is being reconfigured and the STA VAP was the first one created.
* Ensure the beacon interval / timing programming is within the AR9300
HAL bounds by masking off any flags that may have been there before
shifting the value up to 1/8 TUs rather than the 1 TU resolution the
previous chips used.
Now I don't get weird beacon reprogramming during startup, STA state
changes and hardware recovery which showed up as HI-LARIOUS beacon
configurations and STAs that would just disconnect from the AP very
frequently.
Tested:
* AR9344/AR9380, STA and AP and STA+AP modes
I've seen this fail from time to time and just hang during reset.
Instead of it just hanging, just poke it again. I've not seen it
fail in hundreds of test resets now.
Tested:
* AR9344 AP/STA configuration
A problem was reported via email, where a large (130000+) accumulation
of NFSv4 opens on an NFSv4 mount caused significant lock contention
on the mutex used to protect the client mount's open/lock state.
Although the root cause for the accumulation of opens was not
resolved, it is obvious that the NFSv4 client is not designed to
handle 100000+ opens efficiently. When searching for an open,
usually for a match by file handle, a linear search of all opens
is done.
This patch adds a table of hash lists for the opens, hashed on
file handle. This table will be used by future commits to
search for an open based on file handle more efficiently.
MFC after: 2 weeks
In order to compare upcoming changes for their effectivness, measure
performance by counting opertions and the runtime of each operation
over the time. Accumulate all tests in a single instance, so make it
complicated over the time. If you wait long enough, you will notice
the expiry of old flows.
Reviewed by: kp (earlier version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30379
The previous:
if ((uoff_t)uio->uio_offset + uio->uio_resid > lim)
signal(....);
was replaced with:
if ((uoff_t)uio->uio_offset + uio->uio_resid < lim)
return;
signal(....);
Making (uoff_t)uio->uio_offset + uio->uio_resid == lim trip over the
limit, when it did not previously.
Unbreaks running 13.0 buildworld.
It was possible that termination of ktrace session occured during some
record write, in which case write occured after the close of the vnode.
Use ktr_io_params refcounting to avoid this situation, by taking the
reference on the structure instead of vnode.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30400
Instead of trying to partially ifdef out ktrace handling, define the
missing identifier to 0. Without this fix lack of ktrace in the kernel
also means there is no SIGXFSZ signal delivery.
This allows tracking all wait times with much smaller runtime impact.
For example when doing -j 104 buildkernel on tmpfs:
no profiling: 2921.70s user 282.72s system 6598% cpu 48.562 total
all acquires: 2926.87s user 350.53s system 6656% cpu 49.237 total
contested only: 2919.64s user 290.31s system 6583% cpu 48.756 total
Only print buffer cache debug message when a cache lookup has been done.
When running `fsck_ffs -d` on a gjournal'ed filesystem, it's possible
that totalreads is greater than zero when no cache lookup has been
done - causing a divide by zero. This commit fixes the following error:
Floating point exception (core dumped)
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D30370
The default mb_use_ext_pgs value was toggled in commit 52cd25eb1a.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30393
These are not needed when including ktls.h to get sockopt definitions.
Reviewed by: gallatin, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30392
sys_ktrace() calls namei(), which may call ktrnamei(). But sys_ktrace()
also calls ktrace_enter() first, so if the caller is itself being
traced, the assertion in ktrace_enter() is triggered. And, ktrnamei()
does not check for recursion like most other ktrace ops do.
Fix the bug by simply deferring the ktrace_enter() call.
Also make the parameter to ktrnamei() const and convert to ANSI.
Reported by: syzbot+d0a4de45e58d3c08af4b@syzkaller.appspotmail.com
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30340
Handle the case where during socket option processing, the user
switches a stack such that processing the stack specific socket
option does not make sense anymore. Return an error in this case.
MFC after: 1 week
Reviewed by: markj
Reported by: syzbot+a6e1d91f240ad5d72cd1@syzkaller.appspotmail.com
Sponsored by: Netflix, Inc.
Differential revision: https://reviews.freebsd.org/D30395
When enabled, writes to ktrace.out that exceed the max file size limit
cause SIGXFSZ as it should be, but note that the limit is taken from
the process that initiated ktrace. When disabled, write is blocked,
but signal is not send.
Note that in either case ktrace for the affected process is stopped.
Requested and reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30257
Other processes might still be able to write, make the decision to stop
based on the per-process situation.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30257
and use the mark to stop applying file size limits on the write of
the accounting record. This allows to remove hack to clear process
limits in acct_process(), and avoids the bug with the clearing being
ineffective because limits are also cached in the thread structure.
Reported and reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30257
Wrap too long lines.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30257
Otherwise pages are cleaned some time later when the lower fs decides
that it is time to do it. This mostly manifests itself as delayed
mtime update, e.g. breaking make-like programs.
Reported by: mav
Tested by: mav, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
There is no need to own vnode interlock, since v_object is type stable
and can only change to/from NULL, and no other checks in the function
access fields protected by the interlock. Remove the need variable, the
result of the test is directly usable as return value.
Tested by: mav, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
