supposed to be edited by the user and didn't define important things,
thus we can just skip it (that's where it differs from the make.conf.local
change).
Submitted by: ru
discussed on the arch@ mailinglist (after repo-copy).
sys.mk will .error if it finds /etc/defaults/make.conf but include
it anyways (this is the same behaviour as with the make.conf.local
removal).
/usr/share/examples/etc/make.conf has BDEFLAGS commented out now,
since it's only an example file.
Adjust all textes that talk about make.conf or defaults/make.conf to
match the new situation.
and MINUSLPAM must be kept in sync with the libraries linked to by libpam
to support static linkage.
Moved libmd to the end of LIBPAM and MINUSLPAM. It was before libopie,
but libopie references it, so static linkage only worked accidentally.
have been fatal since it gave a dependency on a nonexistent file, but it
worked because of an undocumented bugfeature in make(1): missing source
files named *.a are silently assumed to be up to date.
Fixed some style bugs (formatting).
(While there, I also moved the single suffix C rules beside the double
suffix ones so they are easier to find)
PR: 24438
Submitted by: Georg-W. Koltermann <gwk@sgi.com>
to avoid polluting sys.mk. This directive controls the addition of
compiler warning flags to CFLAGS in a relatively compiler-neutral manner.
The idea is that WARNS can be set in Makefile.inc or in individual
Makefiles as they become clean, to prevent the introduction of new
warnings in the code. -Werror is added by default
- the changes that renamed libf2c to libg2c had not reached here
- there were no definitions for LIBDEVINFO, LIBMENU, LIBPANEL, LIBTINFO,
LIBUSB or LIBVGL. LIBUSB was used without it being defined, and
LIBDEVINFO and LIBVGL should have been used.
- the definitions of LIBDESCRYPT, LIBGCC_PIC, LIBGPLUSPLUS, LIBKZHEAD,
LIBKZTAIL, LIBSCRYPT and LIBSCSI were garbage.
Fixed some old bugs:
- LIBC_PIC and LIBCOM_ERR were assigned to using "=" instead of "?=".
- the definition of LIBC_R was disordered.
- LIBFORM was misspelled LIBFORMS (but not actually used).
Some of the major changes include:
- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better
modularize the code that handles the hierarchy of SCSI errors.
As a result, the code is now much easier to read.
- String handling and error printing has been significantly
revamped. We now use sbufs to do string formatting instead
of using printfs (for the kernel) and snprintf/strncat (for
userland) as before.
There is a new catchall error printing routine,
cam_error_print() and its string-based counterpart,
cam_error_string() that allow the kernel and userland
applications to pass in a CCB and have errors printed out
properly, whether or not they're SCSI errors. Among other
things, this helped eliminate a fair amount of duplicate code
in camcontrol.
We now print out more information than before, including
the CAM status and SCSI status and the error recovery action
taken to remedy the problem.
- sbufs are now available in userland, via libsbuf. This
change was necessary since most of the error printing code
is shared between libcam and the kernel.
- A new transfer settings interface is included in this checkin.
This code is #ifdef'ed out, and is primarily intended to aid
discussion with HBA driver authors on the final form the
interface should take. There is example code in the ahc(4)
driver that implements the HBA driver side of the new
interface. The new transfer settings code won't be enabled
until we're ready to switch all HBA drivers over to the new
interface.
src/Makefile.inc1,
lib/Makefile: Add libsbuf. It must be built before libcam,
since libcam uses sbuf routines.
libcam/Makefile: libcam now depends on libsbuf.
libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the
sbuf sources from sys/kern.
bsd.libnames.mk: Add LIBSBUF.
camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically
linked, we can't depend on the dynamic linker
to pull in libsbuf.
camcontrol.c: Use cam_error_print() instead of checking for
CAM_SCSI_STATUS_ERROR on every failed CCB.
sbuf.9: Change the prototypes for sbuf_cat() and
sbuf_cpy() so that the source string is now a
const char *. This is more in line wth the
standard system string functions, and helps
eliminate warnings when dealing with a const
source buffer.
Fix a typo.
cam.c: Add description strings for the various CAM
error status values, as well as routines to
look up those strings.
Add new cam_error_string() and
cam_error_print() routines for userland and
the kernel.
cam.h: Add a new CAM flag, CAM_RETRY_SELTO.
Add enumerated types for the various options
available with cam_error_print() and
cam_error_string().
cam_ccb.h: Add new transfer negotiation structures/types.
Change inq_len in the ccb_getdev structure to
be "reserved". This field has never been
filled in, and will be removed when we next
bump the CAM version.
cam_debug.h: Fix typo.
cam_periph.c: Modularize cam_periph_error(). The SCSI error
handling part of cam_periph_error() is now
in camperiphscsistatuserror() and
camperiphscsisenseerror().
In cam_periph_lock(), increase the reference
count on the periph while we wait for our lock
attempt to succeed so that the periph won't go
away while we're sleeping.
cam_xpt.c: Add new transfer negotiation code. (ifdefed
out)
Add a new function, xpt_path_string(). This
is a string/sbuf analog to xpt_print_path().
scsi_all.c: Revamp string handing and error printing code.
We now use sbufs for much of the string
formatting code. More of that code is shared
between userland the kernel.
scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly
useful in the first place.
Add a new error action, SS_REQSENSE. (Send a
request sense and then retry the command.)
This is useful when the controller hasn't
performed autosense for some reason.
Change the default actions around a bit.
scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection
timeouts shouldn't be covered by a sense flag.
scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO.
Get rid of the last vestiges of a read/write
interface.
libkern/bsearch.c,
sys/libkern.h,
conf/files: Add bsearch.c, which is needed for some of the
new table lookup routines.
aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if
CAM_NEW_TRAN_CODE is defined.
sbuf.h,
subr_sbuf.c: Add the appropriate #ifdefs so sbufs can
compile and run in userland.
Change sbuf_printf() to use vsnprintf()
instead of kvprintf(), which is only available
in the kernel.
Change the source string for sbuf_cpy() and
sbuf_cat() to be a const char *.
Add __BEGIN_DECLS and __END_DECLS around
function prototypes since they're now exported
to userland.
kdump/mkioctls: Include stdio.h before cam.h since cam.h now
includes a function with a FILE * argument.
Submitted by: gibbs (mostly)
Reviewed by: jdp, marcel (libsbuf makefile changes)
Reviewed by: des (sbuf changes)
Reviewed by: ken
manual section. If, for example, MANSECT is set to 8, the default
MAN1=${PROG}.1 feature of bsd.prog.mk becomes MAN8=${PROG}.8.
Useful for games, libexec, sbin and usr.sbin subtrees.
Reviewed by: bde
and Pentium II, III and IV processors (p2, p3, p4), as well as 'mmx' and
'3dnow' MACHINE_CPU tags as appropriate. In the near future this will
be used to control various ports which have MMX/3dNow optimizations,
instead of the ad-hoc methods currently used.
Reviewed by: peter
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
