o When forced to be 10baseT, don't require that the 10baseT interface
have link to succeed. Still require it for IFM_AUTO, however, since it
appears that there's no way to tell if a specific type of interface
worked. I'm doing a web search for a datasheet now to see if there's
anything obvious.
o Minor incidental formatting nits, including collapsing code of the form
if (foo) {
bar();
} else {
if (baz)
bing();
}
into:
if (foo) {
bar();
} else if (baz) {
bing();
}
to save an indentation level.
o Remove stray reference to 3.x config file syntax.
# I believe John's patches still apply after this...
timer by keeping a once-a-second timer running that decrements a counter
similar to if_timer and reset the chip if it gets down to zero via the
decrement.
- Use IFQ_SET_MAXLEN().
The Giant lock is acquired in two places in tty_tty.c. In both places,
it is unneeded.
There is no reason to specify D_NEEDGIANT on this device node. The
device node has only been designed to return ENXIO when opened. It
doesn't make any sense to lock/unlock Giant, just to return this error.
D_TTY is also unneeded. The unimplemented functions don't need to be
patched by devfs.
We don't need to lock Giant when we want to lookup the proper TTY vnode.
s_ttyvp is already protected by proctree_lock (see devfs_vnops.c).
Approved by: philip (mentor)
systems where the CardBus bridge was connected to a APIC. The case
where the probe routine is told to not setup the IRQ was mishandled
but the error was masked in the case where the IRQ was a valid one
for the card.
MFC after: 1 week
bring it more up to date. The watchdog timer, and its
associated code, is all collapsed into the ndis_tick function
that was implemented for the NDIS-subsystem watchdog. This
implementation is similar to what numerous other drivers use
to implement the watchdog.
Reviewed by: thompsa, jhb
MFC after: 2 weeks
- Add a mutex to the softc to protect the softc and device hardware.
- Don't leak bus resources if if_alloc() fails during attach.
- Setup the interrupt handler after calling ether_ifattach().
- Use a private timer to manage the transmit watchdog.
Tested by: WATANABE Kazuhiro CQG00620 of nifty.ne.jp
- Add a mutex to protect the softc and device hardware.
- Use a callout rather than a callout_handle for the media timer.
- Use a dedicated timer for managing the tx watchdog rather than if_timer.
- Fix some resource leaks if xe_attach() fails.
- Shutdown the device before detaching the driver.
- Setup the interrupt handler after ether_ifattach().
Tested by: Ian FREISLICH ianf of clue.co.za
- Add a mutex to the softc and use it to protect the softc and device.
- Setup the interrupt handler in the common code instead of in each front
end and do it after ether_ifattach().
- Use ie_stop() and ieinit_locked() in iereset() rather than frobbing IFF_UP
and invoking ieioctl().
- Use DELAY() to implement a spin loop on a register with a timeout rather
than scheduling a timeout and then doing a tight spin on the register.
In the non-MPSAFE case this would never have worked because the spinning
code held Giant and the timeout routine would have been blocked on Giant
forever. The same approach would not worke in the MPSAFE case either for
the same reason, hence use a loop around DELAY().
- Clear IFF_DRV_(RUNNING|OACTIVE) in ie_stop() rather than in callers.
- Call ieinit_locked() directly rather than ieioctl(!) from ie_mc_reset().
- Don't leak the rx frame buffer on detach.
Tested by: Thierry Herbelot thierry of herbelot.com
a client reboot, do this check before performing the lock otherwise we
will trash the new lock along with any other old locks the client held
before rebooting.
Make sure nlm_check_idle always returns with nlm_global_lock held.
MFC after: 1 week
template, use an M_TEMP malloc(9) allocation rather than an mbuf
with mtod(9) and dtom(9). This eliminates the last use of
dtom(9) in TCP.
MFC after: 3 weeks
In the mpsafetty branch, Linux sshd seems to work properly inside a
jail. Some small modifications had to be made to the Linux compatibility
layer.
The Linux PTY routines always expect the device major number to be 136
or higher. Our code always set the major/minor number pair to 136:0.
This makes routines like ttyname() and ptsname() fail, because we'll end
up having ambiguous device numbers.
The conversion was not performed on all *stat() routines, which meant in
some cases the numbers didn't get transformed. By pushing the conversion
into linux_driver_get_major_minor(), the transformation will take place
on all calls.
Approved by: philip (mentor), rdivacky
variable in an int to avoid casting to an unsigned value which causes
the comparison with -1 to fail.
PR: 123807
Submitted by: Matthew Luckie
Reviewed by: keramida@
MFC after: 1 week
to reduce performance degradation under heavy outgoing scan/flood.
Scalability is now much more important then several kilobytes of RAM.
Remove unneded TCP-specific expiration handeling. Before this connected
TCP sessions could never expire. Now connected TCP sessions will expire
after 24hours of inactivity.
Simplify HouseKeeping() to avoid several mul/div-s per packet. Taking into
account increased LINK_TABLE_OUT_SIZE, precision is still much more then
required.
- to increase performance do not reallocate mbuf when possible,
- to support up to 16K packets (was 2K max) use mbuf cluster of proper size.
This change depends on recent ng_nat and ip_fw_nat changes.
filling the table of ALTQ queues retrieved from the kernel.
It is possible for the kernel to return the queues not by pa.altq.qid order.
When this happens, pf_snmp would only partially fill its table.
PR: bin/120974
Submitted by: Mykola Dzham <i -at- levsha.org.ua>
MFC after: 3 days
As discussed with Robert Watson and John Baldwin, it would be better if
PTY's are created with proper permissions, turning grantpt() into a
no-op.
Bypassing security frameworks like MAC by passing NOCRED to
VOP_SETATTR() will only make things more complex.
Approved by: philip (mentor)
pretend to be IntelliMouse (which have a few more features than generic mice)
causing the IntelliMouse probe to work and the Synaptics code never to be
called.
This should not break "real" IntelliMouse because the Synaptics detection code
is fairly specific.
PR: kern/120833
Submitted by: Eygene Ryabinkin <rea-fbsd -at- codelabs.ru>
MFC after: 1 week
This fixes packet fragmentation handeling.
Pass really available buffer size to libalias instead of MCLBYTES constant.
MCLBYTES constant were used with believe that m_megapullup() always moves
date into a fresh cluster that sometimes may become not so.
promotion within the kernel's address space. Specifically,
pmap_promote_pde() is only called when the page table page (PTP) that
is referenced by the given PDE has a full "use count", i.e., its
wire_count is 512. Although this guarantees for a user address space
that all 512 PTEs in the PTP hold valid mappings, the same is not true
of the kernel's address space. A kernel PTP always has a use count of
512 regardless of the state of the PTEs. Therefore,
pmap_promote_pde() should not assume (or assert) that the first PTE in
the PTP is valid.
(Don't ask for a vendor import of this yet, we're in the early days of svn)
Instead of using cyclic timers to call the state clean and deadman callbacks,
use a callout on FreeBSD to avoid the deadlock on FreeBSD due to trying to
send interprocessor interrupts with interrupts disabled.
Reported by: ps, jhb, peter, thompsa
In the mpsafetty branch, PTY's are allocated through the posix_openpt()
system call. The controller side of a PTY now uses its own file
descriptor type (just like sockets, vnodes, pipes, etc).
To remain compatible with existing FreeBSD and Linux C libraries, we can
still create PTY's by opening /dev/ptmx or /dev/ptyXX. These nodes
implement d_fdopen(). Devfs has been slightly changed here, to allow
finit() to be called from d_fdopen().
The routine grantpt() has also been moved into the kernel. This routine
is a little odd, because it needs to bypass standard UNIX permissions.
It needs to change the owner/group/mode of the slave device node, which
may often not be possible. The old implementation solved this by
spawning a setuid utility.
When VOP_SETATTR() is called with NOCRED, devfs_setattr() dereferences
ap->a_cred, causing a kernel panic. Change the de_{uid,gid,mode} code to
allow changes when a->a_cred is set to NOCRED.
Approved by: philip (mentor)
syscons(4) Colemak keyboard layout support,
jme(4) for JMicron JMC250 Gigabit/JMC260 Fast Ethernet controllers,
ISDN4BSD and netatm removal,
libarchive-based cpio added and GNU cpio renamed as gcpio,
jexec(8) -j option added,
ping6(8) return value is now the same as ping(8),
tar(1) --numeric-owner, -S, and -s options added, and
pkg_create(1) -n option added.