Commit Graph

41 Commits

Author SHA1 Message Date
Navdeep Parhar
09fe63205c - Updated TOE support in the kernel.
- Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs.
  These are available as t3_tom and t4_tom modules that augment cxgb(4)
  and cxgbe(4) respectively.  The cxgb/cxgbe drivers continue to work as
  usual with or without these extra features.

- iWARP driver for Terminator 3 ASIC (kernel verbs).  T4 iWARP in the
  works and will follow soon.

Build-tested with make universe.

30s overview
============
What interfaces support TCP offload?  Look for TOE4 and/or TOE6 in the
capabilities of an interface:
# ifconfig -m | grep TOE

Enable/disable TCP offload on an interface (just like any other ifnet
capability):
# ifconfig cxgbe0 toe
# ifconfig cxgbe0 -toe

Which connections are offloaded?  Look for toe4 and/or toe6 in the
output of netstat and sockstat:
# netstat -np tcp | grep toe
# sockstat -46c | grep toe

Reviewed by:	bz, gnn
Sponsored by:	Chelsio communications.
MFC after:	~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
Ulrich Spörlein
de21233f45 Unbreak make depend. 2012-05-30 13:55:43 +00:00
Bjoern A. Zeeb
47cfa99a50 MFp4 bz_ipv6_fast:
Allow LRO to work on IPv6 as well.
  Fix the module Makefile to at least properly inlcude opt_inet6.h
  and allow builds without INET or INET6.

  Sponsored by:	The FreeBSD Foundation
  Sponsored by:	iXsystems

Reviewed by:	gnn (as part of the whole)
MFC After:	3 days
2012-05-25 03:00:34 +00:00
Warner Losh
c09808d0d6 MFtbemd:
Use MACHINE_CPUARCH in preference to MACHINE_ARCH.  The former is the
source code location of the machine, the latter the binary output.  In
general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless
we're tesitng for a specific target.  The isn't even moot for
i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86,
although a specific cleanup for that likely would be needed...
2010-08-23 06:13:29 +00:00
Navdeep Parhar
e83ec3e5c3 There is no need to test __FreeBSD_version for features that have
been around for a long time now (7.1-ish or even earlier); assume
they are present.  These includes MSI, TSO, LRO, VLAN, INTR_FILTERS,
FIRMWARE, etc.

Also, eliminate some dead code and clean up in other places as part
of this quick once-over.

MFC after:	1 week
2010-02-24 10:16:18 +00:00
Navdeep Parhar
c01f2b8301 cxgb(4) updates, including:
- support for the new Gen-2, BT, and LP-CR cards.
- T3 firmware 7.7.0
- shared "common code" updates.

Approved by:	gnn (mentor)
Obtained from:	Chelsio
MFC after:	1 month
2009-10-05 20:21:41 +00:00
Kip Macy
3f345a5d09 Greatly simplify cxgb by removing almost all of the custom mbuf management logic
- remove mbuf iovec - useful, but adds too much complexity when isolated to
   the driver

- remove driver private caching - insufficient benefit over UMA to justify
  the added complexity and maintenance overhead

- remove separate logic for managing multiple transmit queues, with the
  new drbr routines the control flow can be made to much more closely resemble
  legacy drivers

- remove dedicated service threads, with per-cpu callouts one can get the same
  benefit much more simply by registering a callout 1 tick in the future if there
  are still buffered packets

- remove embedded mbuf usage - Jeffr's changes will (I hope) soon be integrated
  greatly reducing the overhead of using kernel APIs for reference counting
  clusters

- add hysteresis to descriptor coalescing logic

- add coalesce threshold sysctls to allow users to decide at run-time
  between optimizing for forwarding / UDP or optimizing for TCP

- add once per second watchdog to effectively close the very rare races
  occurring from coalescing

- incorporate Navdeep's changes to the initialization path required to
  convert port and adapter locks back to ordinary mutexes (silencing BPF
  LOR complaints)

- enable prefetches in get_packet and tx cleaning

Reviewed by:	navdeep@
MFC after:	2 weeks
2009-06-19 23:34:32 +00:00
Bjoern A. Zeeb
8d8bc0182e After r193232 rt_tables in vnet.h are no longer indirectly dependent on
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.

Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
2009-06-08 19:57:35 +00:00
Robert Watson
d5fc25e5d6 Remove opt_mac.h generation for various kernel modules that no longer
require it.

Submitted by:	pjd
2009-06-06 17:01:44 +00:00
Qing Li
6e6b3f7cbc This main goals of this project are:
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
   possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,

The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.

Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:

- Kip Macy revised the locking code completely, thus completing
  the last piece of the puzzle, Kip has also been conducting
  active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
  provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
  me maintaining that branch before the svn conversion
2008-12-15 06:10:57 +00:00
Bjoern A. Zeeb
4b79449e2f Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by:	brooks, gnn, des, zec, imp
Sponsored by:	The FreeBSD Foundation
2008-12-02 21:37:28 +00:00
Paul Saab
b26f0efddd Fix world
Approved by:	kmacy
2008-11-14 01:56:11 +00:00
Bjoern A. Zeeb
710ca67300 Add opt_inet.h which has been needed since r184714, r184715 introducing
checks for #ifdef INET.

Submitted by:	kmacy (r184876, I splitted lines)
MFC after:	54 days
2008-11-12 21:30:39 +00:00
Kip Macy
a7db7fbd35 - Remove default NIC dependency on ulp headers
- make toe module build dependent on kernel support

Submitted by:	Chelsio Inc.
MFC after:	1 week
2008-09-24 01:19:08 +00:00
Kip Macy
79775f8f1b Update cxgb include paths to not require prefixing with dev/cxgb
Submitted by:	Chelsio Inc.
2008-09-23 03:16:54 +00:00
Kip Macy
25292deb42 Remove cxgb private lro implementation and switch to using system implementation.
Obtained from:	Chelsio Inc.
MFC after:	1 week
2008-08-12 00:27:32 +00:00
Kip Macy
4af83c8cff import vendor fixes to cxgb 2008-07-18 06:12:31 +00:00
Kip Macy
e7989722c0 only build iw_cxgb on i386 and amd64 2008-05-06 02:31:27 +00:00
Kip Macy
7df01cd583 add iw_cxgb to the build 2008-05-05 20:21:20 +00:00
Kip Macy
46b0a854cc move cxgb_lt2.[ch] from NIC to TOE
move most offload functionality from NIC to TOE
factor out all socket and inpcb direct access
factor out access to locking in incpb, pcbinfo, and sockbuf
2008-04-19 03:22:43 +00:00
Kip Macy
66aaad30c9 Add KMOD target.
Discovered by: Takahashi Yoshihiro
2008-03-03 03:34:52 +00:00
Kip Macy
64a3713337 move remaining binaries in to blob headers 2008-02-26 23:05:05 +00:00
Kip Macy
404825a72b Move firmware in to separate module that can be compiled statically in to the kernel
Add utility for converting future firmware revs to a C header file
2008-02-26 03:02:20 +00:00
Kip Macy
8e10660f12 - update firmware to 5.0
- add support for T3C
- add DDP support (zero-copy receive)
- fix TOE transmit of large requests
- fix shutdown so that sockets don't remain in CLOSING state indefinitely
- register listeners when an interface is brought up after tom is loaded
- fix setting of multicast filter
- enable link at device attach
- exit tick handler if shutdown is in progress
- add helper for logging TCB
- add sysctls for dumping transmit queues

- note that TOE wxill not be MFC'd until after 7.0 has been finalized

MFC after: 3 days
2008-02-23 01:06:17 +00:00
Kip Macy
c2791efe44 add opt_global.h dependency 2008-01-26 01:00:56 +00:00
Kip Macy
9c76da338c add cxgb_multiq.c to the build 2008-01-13 22:31:59 +00:00
Kip Macy
b96ebbf2e8 Don't overload tcp_usrreqs unless the kernel doesn't provide offload support. 2007-12-18 23:00:25 +00:00
Kip Macy
8090c9f504 Make TCP offload work on HEAD (modulo negative interaction between sbcompress
and t3_push_frames).
 - Import latest changes to cxgb_main.c and cxgb_sge.c from toestack p4 branch
 - make driver local copy of tcp_subr.c and tcp_usrreq.c and override tcp_usrreqs so
   TOE can also functions on versions with unmodified TCP

- add cxgb back to the build
2007-12-17 08:17:51 +00:00
Kip Macy
3b10e74aa9 Makefile for the TCP offload module 2007-12-16 05:40:18 +00:00
Kip Macy
64e4fdfff0 Don't use old style mbuf iovec interface 2007-12-16 05:34:18 +00:00
Kip Macy
22a80c41fa Move NIC driver (cxgb) into its own directory. Add toecore to support
registering different TOMs.
2007-12-15 22:03:19 +00:00
Kip Macy
5c5df3da16 - fix qset to port binding as a proper fix for the problems encountered on the 4-port
- fix the use after free seen when sending packets small enough to fit as an immediate
   and bpf peers are present
 - update to firmware rev 4.7 along with various small vendor fixes

Supported by: Chelsio
Approved by: re (blanket)
MFC after: 3 days
2007-09-09 01:28:03 +00:00
Kip Macy
ac3a6d9cef - integrate most recent changes from vendor branch and upgrade to firmware revision 4.5.5
- add filter support
	- further improvements for T304
- recover gracefully from spurious immediate packets

Approved by: re(blanket)
Supported by: Chelsio
MFC after: 3 days
2007-07-17 06:50:35 +00:00
Kip Macy
ef72318f0e - import new common code for the T304
- update to firmware version 4.1.0

- switch over to standard method for initializing cdevs (contributed by scottl@)
- break out timer_reclaim_task to be per-port
- move msix teardown into separate function
- fix bus_setup_intr for msi-x for the multi-port case so that msi-x resources
  are not corrupted on unload
- handle 10/100/1000 base-T media and auto negotiation
- bind qset to cpu even for singleq case
- white space cleanups
- remove recursive PORT_LOCK
- move mtu setting to separate function
- stop and re-init port when changing mtu
- replace all direct references to m_data with calls to mtod
- handle attach failure better by not trying to de-initialize
  taskqueues when they have not been allocated
- no longer default to jumbo frames

Sponsored by: Chelsio
MFC after: 3 days
2007-06-13 05:36:00 +00:00
Kip Macy
10faa56870 When building cxgb as a module make include paths relative to the driver's root.
This will make it possible to build the module out of tree against an older src tree.

MFC after: 3 days
2007-05-28 22:57:27 +00:00
Kip Macy
d722cab49a (MFp4)
- upgrade to reflect state of 1.0.0.86
        - move from firmware rev 3.2 to 4.0.0
        - import driver bits for offload functionality
	- remove binary distribution clause from top level files as it
	  runs counter to the intent of purely supporting the hardware

MFC after: 3 days
2007-05-25 09:48:20 +00:00
Kip Macy
27f0ce0f2b hook uipc_mvec.c into build 2007-04-08 15:18:03 +00:00
Kip Macy
b5bb9b72d1 Remove firmware version flags
MFC after: 3 days
2007-03-21 00:54:23 +00:00
Kip Macy
062553aed4 Disable linking in of firmware on ia64 to avoid build failures from a
broken ld.
2007-03-14 18:20:36 +00:00
Kip Macy
2150ddaa62 no-op cxgb_config.h for the module compilation case 2007-03-14 06:41:34 +00:00
Kip Macy
f15721bd52 Add modules Makefile for cxgb 2007-03-14 02:47:38 +00:00