available and if that is true make use of them.
Thank you very much to Andrew Turner for providing help and review the patch!
Reviewed by: andrew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10499
This test was failing if run twice because rtadvd takes too long to die.
The rtadvd process from the first run was still running when the
second run created its interfaces. The solution is to use SIGKILL during
the cleanup instead of SIGTERM so rtadvd will die faster.
While I'm here, randomize the addresses used for the test, which makes bugs
like this easier to spot, and fix the cleanup order to be the opposite of
the setup order
PR: 217871
MFC after: 18 days
X-MFC-With: 315458
Sponsored by: Spectra Logic Corp
A couple of the ptrace tests make assumptions about which thread in a
multithreaded process will run after a halt. This makes the tests less
portable across branches, and susceptible to future breakage. Instead,
twiddle thread scheduling and priorities to match the tests'
expectation.
X-MFC with: r313992
Sponsored by: Dell EMC
sys/netinet6/icmp6.c
Use the interface's FIB for source address selection in ICMPv6 error
responses.
sys/netinet6/in6.c
In in6_newaddrmsg, announce arrival of local addresses on the
interface's FIB only. In in6_lltable_rtcheck, use a per-fib ND6
cache instead of a single cache.
sys/netinet6/in6_src.c
In in6_selectsrc, use the caller's fib instead of the default fib.
In in6_selectsrc_socket, remove a superfluous check.
sys/netinet6/nd6.c
In nd6_lle_event, use the interface's fib for routing socket
messages. In nd6_is_new_addr_neighbor, check all FIBs when trying
to determine whether an address is a neighbor. Also, simplify the
code for point to point interfaces.
sys/netinet6/nd6.h
sys/netinet6/nd6.c
sys/netinet6/nd6_rtr.c
Make defrouter_select fib-aware, and make all of its callers pass in
the interface fib.
sys/netinet6/nd6_nbr.c
When inputting a Neighbor Solicitation packet, consider the
interface fib instead of the default fib for DAD. Output NS and
Neighbor Advertisement packets on the correct fib.
sys/netinet6/nd6_rtr.c
Allow installing the same host route on different interfaces in
different FIBs. If rt_add_addr_allfibs=0, only install or delete
the prefix route on the interface fib.
tests/sys/netinet/fibs_test.sh
Clear some expected failures, but add a skip for the newly revealed
BUG217871.
PR: 196361
Submitted by: Erick Turnquist <jhujhiti@adjectivism.org>
Reported by: Jason Healy <jhealy@logn.net>
Reviewed by: asomers
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9451
The ptrace() user has the option of discarding the signal. In such a
case, p_ptevents should not be modified. If the ptrace() user decides to
send a SIGKILL, ptevents will be cleared in ptracestop(). procfs events
do not have the capability to discard the signal, so continue to clear
the mask in that case.
Reviewed by: jhb (initial revision)
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9939
This change moves the tests added in r313962 to an existing directory
structure used by the geli TAP tests. It also, renames the test from
pbkdf2 to pbkdf2_test .
The changes to ObsoleteFiles.inc are being committed separately as they
aren't needed for the MFC to ^/stable/11, etc, if the MFC for the tests
is done all in one commit.
MFC after: 2 weeks
X-MFC with: r313962, r313972-r313973
Reviewed by: allanjude
Sponsored by: Dell EMC Isilon
Differential Revision: D9985
Suppose a traced process is stopped in ptracestop() due to receipt of a
SIGSTOP signal, and is awaiting orders from the tracing process on how
to handle the signal. Before sending any such orders, the tracing
process exits. This should kill the traced process. But suppose a second
thread handles the SIGKILL and proceeds to exit1(), calling
thread_single(). The first thread will now awaken and will have a chance
to check once more if it should go to sleep due to the SIGSTOP. It must
not sleep after P_SINGLE_EXIT has been set; this would prevent the
SIGKILL from taking effect, leaving a stopped orphan behind after the
tracing process dies.
Also add new tests for this condition.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9890
Tests that an interface can get a SLAAC address and that it inserts its
routes into the correct fib. Does not test anything to do with NDP.
PR: 196361
Reviewed by: Erick Turnquist <jhujhiti@adjectivism.org>
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9776
In the Kyua era, it's no longer necessary to set PJDFSTEST_TEST_PATH. Just
use TMPDIR instead.
Reviewed by: ngie
MFC after: 3 weeks
Relnotes: yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9340
When a thread is stopped in ptracestop(), the ptrace(2) user may request
a signal be delivered upon resumption of the thread. Heretofore, those signals
were discarded unless ptracestop()'s caller was issignal(). Fix this by
modifying ptracestop() to queue up signals requested by the ptrace user that
will be delivered when possible. Take special care when the signal is SIGKILL
(usually generated from a PT_KILL request); no new stop events should be
triggered after a PT_KILL.
Add a number of tests for the new functionality. Several tests were authored
by jhb.
PR: 212607
Reviewed by: kib
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Dell EMC
In collaboration with: jhb
Differential Revision: https://reviews.freebsd.org/D9260
committed in r313972
The code committed in r313962 implicitly relies on python 2.x to generate
testvect.h . There are a handful of issues with this approach:
- python is not an explicit build dependency for FreeBSD
- python 2.x is deprecated and will be removed sometime in the future
(potentially before 11.x's EOL), and the script does not function with
python 3.5 (it uses deprecated idioms and incompatible function calls).
- python(1) (by default) lives in /usr/local/bin (${LOCALBASE}/bin) and
gentestvect.py is a dependency of testvect.h (prior to r313972) which
means that if the mtime of the generator script was newer than the
mtime of the test vector, it could cause a spurious build failure in
build time or at install time.
A better solution using C/C++ should be devised.
Discussed with: allanjude
MFC after: 2 weeks
X-MFC with: r313962, r313972
Sponsored by: Dell EMC Isilon
Using relative paths imply working directory (in this case .OBJDIR), whereas the
sources live in the .CURDIR-relative path.
MFC after: 2 weeks
X-MFC with: r313962
Pointyhat to: allanjude
Sponsored by: Dell EMC Isilon
The PBKDF2 in sys/geom/eli/pkcs5v2.c is around half the speed it could be
GELI's PBKDF2 uses a simple benchmark to determine a number of iterations
that will takes approximately 2 seconds. The security provided is actually
half what is expected, because an attacker could use the optimized
algorithm to brute force the key in half the expected time.
With this change, all newly generated GELI keys will be approximately 2x
as strong. Previously generated keys will talk half as long to calculate,
resulting in faster mounting of encrypted volumes. Users may choose to
rekey, to generate a new key with the larger default number of iterations
using the geli(8) setkey command.
Security of existing data is not compromised, as ~1 second per brute force
attempt is still a very high threshold.
PR: 202365
Original Research: https://jbp.io/2015/08/11/pbkdf2-performance-matters/
Submitted by: Joe Pixton <jpixton@gmail.com> (Original Version), jmg (Later Version)
Reviewed by: ed, pjd, delphij
Approved by: secteam, pjd (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8236
Some recent changes to vm related to mmap(2) have broken the prot checks that
would result with an EINVAL with this case
I suspect r313352 is the root-cause the issue
PR: 216976
Sponsored by: Dell EMC Isilon
results of commands
As noted in r313008, the underlying issue was that geom_gate device
creation wasn't created at ggatel command completion, but some short
time after. ggatec(8) employs similar logic when creating geom_gate(4)
devices.
Switch from retry loops (after the ggatec/dd write calls) to
wait_for_ggate_device function calls after calling ggatec(8) instead
to detect the presence of the /dev/ggate* device, as this function is
sufficient for determining whether or not the character device is ready
for testing
While here, use atf_check consistently with all dd calls to ensure that
data output is as expected.
MFC after: 1 week
Reviewed by: asomers
Differential Revision: D9409
Sponsored by: Dell EMC Isilon
The test assumed that `ggatel create` created a device on completion, but that's
incorrect. This squashes the race by waiting for the device to appear, as
`ggatel create` daemonizes before issuing an ioctl to geom_gate(4) if not called
with `-v`.
Discussed with: asomers
MFC after: 1 week
PR: 204616
Sponsored by: Dell EMC Isilon
Derived from an implementation by Mark Adler.
The fast loop performs three simultaneous CRCs over subsets of the data
before composing them. This takes advantage of certain properties of
the CRC32 implementation in Intel hardware. (The CRC instruction takes 1
cycle but has 2-3 cycles of latency.)
The CRC32 instruction does not manipulate FPU state.
i386 does not have the crc32q instruction, so avoid it there. Otherwise
the implementation is identical to amd64.
Add basic userland tests to verify correctness on a variety of inputs.
PR: 216467
Reported by: Ben RUBSON <ben.rubson at gmail.com>
Reviewed by: kib@, markj@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9342
* Add tests for aio_suspend(2).
* Add tests for polled completion notification.
* Test the full matrix of file descriptor types and completion notification
mechanisms.
* Don't bother with mkstemp, because ATF runs every test in its own temp dir.
* Fix some typos.
* Remove extraneous ATF_REQUIRE_KERNEL_MODULE calls.
Reviewed by: jhb
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D9045
between exp(3) and `exp` var.
The approach taken previously was not ideal for multiple
functional and stylistic reasons.
Add to existing sed call in Makefile to replace `exp` with
`exponent` instead.
MFC after: 13 days
Requested by: bde
The primary goal for doing this is to leverage the work done in r312114
for enabling WARNS to address trivial code quality issues with new tests
MFC after: 6 days
Tested with: make tinderbox
Sponsored by: Dell EMC Isilon
The primary goal for doing this is to leverage the work done in r312114
for enabling WARNS to address trivial code quality issues with new tests
MFC after: 6 days
Tested with: make tinderbox
Sponsored by: Dell EMC Isilon
Use %zu for printing out results from nitems, as it's size_t based
MFC after: 1 week
X-MFC with: r312120
Reported by: gcc (mips:mipsel tinderbox)
Sponsored by: Dell EMC Isilon
State that execve failed instead of just printing out the program name
and strerror(errno) via err(3).
MFC after: 3 days
X-MFC with: r312118
Sponsored by: Dell EMC Isilon
Don't implement some terrible hack on a test by test basis. The
framework fix is straightforward and can be chased up in the original
bug.
Reviewed by: ngie ("be my guest")
This ensures their cleanup routines will be run even if they should timeout.
tests/sys/geom/class/gate/ggate_test.sh
tests/sys/geom/class/gate/Makefile
Add an ATF test with three testcases, one for each TAP test. Use
ATF-style cleanup functions, and convert sleeps to polling loops.
ObsoleteFiles.inc
tests/sys/geom/class/gate/conf.sh
tests/sys/geom/class/gate/1_test.sh
tests/sys/geom/class/gate/2_test.sh
tests/sys/geom/class/gate/3_test.sh
Delete TAP test files
Reviewed by: ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D8891
