Commit Graph

215428 Commits

Author SHA1 Message Date
adrian
bdc602f4b5 uart(4) - make the 8250 uart baudrate tolerance build time tweakable.
It turns out on a 16550 w/ a 25MHz SoC reference clock you get a little
over 3% error at 115200 baud, which causes this to fail.

Just .. cope. Things cope these days.

Default to 30 (3.0%) as before, but allow UART_DEV_TOLERANCE_PCT to be
set at build time to change that.
2015-11-18 06:24:21 +00:00
jhibbits
9a275d9bdc Physical addresses for e500mc/e5500 are 36-bits, e6500 is 40-bits.
Increase BUS_SPACE_MAXADDR to allow for this.

Sponsored by:	Alex Perez/Inertial Computing
2015-11-18 02:18:14 +00:00
jhibbits
9010366275 Add support for new LAW registers in QorIQ SoCs.
QorIQ SoCs (e5500 core, P5 family) have 2 BARs for local access windows, while
MPC85XX, and P1/P2 families use only a single BAR register.

This also adds the QORIQ_DPAA option, mutually exclusive to MPC85XX, to handle
this difference.

Obtained from:	Semihalf
Sponsored by:	Alex Perez/Inertial Computing
2015-11-18 01:54:19 +00:00
allanjude
2832a618fc Add a kernel config for the Onion Omega
Small $25 IoT device, 400mhz Atheros cpu, Atheros WiFi and Ethernet
18 GPIOs, and support for Relay, Servo, and OLED expansion
https://onion.io/omega/

Reviewed by:	adrian
Approved by:	bapt (mentor)
Relnotes:	yes
Sponsored by:	ScaleEngine Inc.
Differential Revision:	https://reviews.freebsd.org/D4188
2015-11-17 21:02:27 +00:00
smh
3de9025c5c Fix early kernel dump via dumpdev env
Setting the dumpdev via env e.g. loader.conf provides the ability to
configure the kernel dump device during early boot. When using this
g_io_getattr was returning EPERM due to cp->acr == 0.

Fix this by calling g_access to ensure we're a read consumer prior
to calling g_dev_setdumpdev.

MFC after:	2 weeks
Sponsored by:	Multiplay
2015-11-17 20:55:50 +00:00
jkim
195994e5fb Simplify man-makefile-update target. 2015-11-17 20:47:16 +00:00
bapt
8f5847a583 mpsutil/mprutil: add flash subcommand
the flash subcommand allows to save/update firmware and bios for LSI Fusion-MPT
2/3 controllers (mps(4) and mpr(4))

Tested by:	allanjude
Reviewed by:	wblock (manpage)
Relnotes:	yes
Sponsored by:	Gandi.net
Differential Revision:	https://reviews.freebsd.org/D4026
2015-11-17 20:42:59 +00:00
bdrewery
39392ad0ea Fix dynamic IPv6 rules showing junk for non-specified address masks.
For example:
  00002      0         0 (19s) PARENT 1 tcp 10.10.0.5 0 <-> 0.0.0.0 0
  00002      4       412 (1s) LIMIT tcp 10.10.0.5 25848 <-> 10.10.0.7 22
  00002     10       777 (1s) LIMIT tcp 2001:894:5a24:653::503:1 52023 <-> 2001:894:5a24:653:ca0a:a9ff:fe04:3978 22
  00002      0         0 (17s) PARENT 1 tcp 2001:894:5a24:653::503:1 0 <-> 80f3:70d:23fe:ffff:1005:: 0

Fix this by zeroing the unused address, as is done for IPv4:
  00002     0         0 (18s) PARENT 1 tcp 10.10.0.5 0 <-> 0.0.0.0 0
  00002    36     14952 (1s) LIMIT tcp 10.10.0.5 25848 <-> 10.10.0.7 22
  00002     0         0 (0s) PARENT 1 tcp 2001:894:5a24:653::503:1 0 <-> :: 0
  00002     4       345 (274s) LIMIT tcp 2001:894:5a24:653::503:1 34131 <-> 2001:470:1f11:262:ca0a:a9ff:fe04:3978 22

MFC after:	2 weeks
2015-11-17 20:42:08 +00:00
mav
f7cc799685 Register our FC4 Features in SNS. 2015-11-17 19:57:49 +00:00
eadler
cad4773244 Fix two spelling errors 2015-11-17 19:43:40 +00:00
bapt
ba973b8f12 Fix typo
Submitted by:	ngie
2015-11-17 19:40:48 +00:00
jhb
e73e0c7b63 Move recently added entry above the "old" line. 2015-11-17 19:03:55 +00:00
uqs
128878f77b Fix 'make depend' 2015-11-17 18:28:56 +00:00
mav
00f2346cc5 Cosmetic addition to r290993. 2015-11-17 16:46:05 +00:00
mav
fcc51d543f Unify and cleanup FC ports scan. 2015-11-17 16:33:46 +00:00
nwhitehorn
207c103c04 Make native page table access endian-safe. Even on CPUs running in
little-endian mode, the hardware page table is big-endian. This is a
no-op on all currently supported systems.

MFC after:	1 month
2015-11-17 16:09:26 +00:00
nwhitehorn
96deb1fcf0 Where appropriate, use the endian-flipping OF_getencprop() instead of
OF_getprop() to get encode-int encoded values from the OF tree. This is
a no-op at present, since all existing PowerPC ports are big-endian, but
it is a correctness improvement and will be required if we have a
little-endian kernel at some future point.

Where it is totally impossible for the code ever to be used on a
little-endian system (much of powerpc/powermac, for instance), I have not
necessarily made the appropriate changes.

MFC after:	1 month
2015-11-17 16:07:43 +00:00
fabient
5bb5d55de9 Implement the sadb_x_policy_priority field as it is done in Linux:
lower priority policies are inserted first.

Submitted by:	Emeric Poupon <emeric.poupon@stormshield.eu>
Reviewed by:	ae
Sponsored by:	Stormshield
2015-11-17 14:39:33 +00:00
mav
c0501d5b01 Off-by-one correctiont to r290980. 2015-11-17 14:22:56 +00:00
mav
1c01f2a884 Make firmware handle virtual ports SNS logins for us. 2015-11-17 14:13:55 +00:00
zbb
c110bf7495 Make PCB structure binary compatible for old and new PMAP on ARM
This structure must be binary compatible regardless of PMAP
version being used. Create reserved section for NEW_PMAP to
make other variables be placed exactly in the same memory
addresses. This fixes kgdb/gdb behavoiur, which uses pcb.h stuctures.
The NEW_PMAP is kernel flag, so it does not propagate to the buildworld,
what makes the tools using pcb.h unable to parse PCB data.

Reviewed by:   mmel, kib
Submitted by:  Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by:  Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4011
2015-11-17 13:09:51 +00:00
mav
d3dc28086b Add real initial support for RQSTYPE_RPT_ID_ACQ. 2015-11-17 13:02:44 +00:00
zbb
6e1426b13a Fix buffer overflow in exynos5_ehci
Use proper size of exynos_ehci_softc, not the generic one.

Reviewed by:   andrew
Submitted by:  Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by:  Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4189
2015-11-17 12:50:45 +00:00
bapt
ad0f90cbe0 install(1) is following symlinks when installing a files, which result in
inconsistency when installing new locales and may also result in failures
when reinstalling after having run make delete-old (due to previous
inconsistencies) for now recommand removing all locales until install(1) is
fixed
2015-11-17 12:18:57 +00:00
ume
16f234bfcc JSON doesn't permit a hexadecimal notation of an integer. 2015-11-17 12:09:57 +00:00
andrew
1252a89f35 Make pl310_print_config static, it's not called out of pl310.c
Sponsored by:	ABT Systems Ltd
2015-11-17 11:26:35 +00:00
araujo
8b819ab5ca Take maintainership of nis(8) and yp(8), Pre-commit review
requested.

Approved by:		bapt (mentor)
Differential Revision:	D4118
2015-11-17 01:45:24 +00:00
rmacklem
c1f0354622 mnt_stat.f_iosize (which is used to set bo_bsize) must be set to
the largest size of buffer cache block or the mapping of the buffer
is bogus. When a mount with rsize=4096,wsize=4096 was done, f_iosize
would be set to 4096. This resulted in corrupted directory data, since
the buffer cache block size for directories is NFS_DIRBLKSIZ (8192).
This patch fixes the code so that it always sets f_iosize to at least
NFS_DIRBLKSIZ.

Tested by:	krichy@cflinux.hu
PR:		177971
MFC after:	2 weeks
2015-11-17 01:44:26 +00:00
glebius
aa15bac7df - Fix directory name for pf.
- Recommend my reviews for CARP.
2015-11-17 01:01:03 +00:00
bdrewery
47e0769b9e Use -n to ln(1) which is compatible with GNU ln(1).
Sponsored by:	EMC / Isilon Storage Division
2015-11-16 23:27:44 +00:00
rmacklem
ee4d679462 When the smbfs iod thread (smb_iod_thread()) is shutting down, smb_iod_destroy()
would call smb_iod_request(). This call could return as soon as the
wakeup(evp) in smb_iod_main() call is done and then could destroy
the mutexes. This caused a race with the rest of smb_iod_main()s
use of these mutexes.
A crash reported on freebsd-stable@ by Christian Kratzer was
diagnosed as a use of one of these mutexes after it was destroyed.
This patch moves destruction of the mutexes from smb_iod_destroy()
to the end of smb_iod_thread(), so that they aren't destroyed before
the thread is done with them. Christian comfirmed that the patch
stopped the crashes from happening.

Reported by:	ck-lists@cksoft.de (Christian Kratzer)
Tested by:	ck-lists@cksoft.de (Christian Kratzer)
Diagnosed by:	jhb
Reviewed by:	jhb
MFC after:	2 weeks
2015-11-16 23:19:53 +00:00
marius
7965ca51f7 - Unbreak dumpsys(9) on sparc64 after r276772
- While at it, arrange #ifndefs in kern_dump.c more intelligently; it's
  rather confusing to have multiple competing and/or unused functions in
  the kernel.
2015-11-16 23:02:33 +00:00
sjg
6fee50ba24 Default MK_META_MODE from MK_DIRDEPS_BUILD
This allows most of the build to simply consider MK_META_MODE

Update to latest dirdeps.mk so we can do:

make -f dirdeps.mk bin/cat.i386

Reviewed by:	bdrewery
2015-11-16 22:50:23 +00:00
imp
ff95372acb Remove redundant copies of CDDL_CFLAGS. 2015-11-16 22:37:28 +00:00
gad
17ef85f978 I'm still interested in reviewing any code changes to lpr & friends
(lpc, lpd, lpq, etc).
2015-11-16 22:08:49 +00:00
avos
6d73945fc8 wpi(4): import r289674
Switch PCI register reads from using magic numbers to using the names
defined in pcireg.h

Approved by:	adrian (mentor)
Differential Revision:	https://reviews.freebsd.org/D4185
2015-11-16 21:55:11 +00:00
jhb
afb0cf7537 Only use a power of 2 for the number of receive and transmit queues.
Using other values causes VMXNET3_CMD_ENABLE to fail.  The Linux
driver also enforces this restriction.

Reviewed by:	bryanv
MFC after:	1 week
Sponsored by:	Norse
Differential Revision:	https://reviews.freebsd.org/D4139
2015-11-16 21:36:50 +00:00
jkim
4a83aa80d5 Remove duplicate manual pages.
Reported by:	brd
2015-11-16 21:36:15 +00:00
marius
5ccbac3412 With r290566 in place it turned out that WOL previously only worked by
accident with RTL8168G and later chips when the interface actually was
brought up. This is due to the fact that with these MAC variants, RXDV
gate needs be disabled for WOL to work. So do just that in re_setwol()
when IFCAP_WOL is requested.
Reported and tested by: dhw

MFC after:	3 days
2015-11-16 21:13:57 +00:00
bdrewery
eca8806ca2 Revert r290944. It was wrong. 2015-11-16 21:05:38 +00:00
bdrewery
ca6e0e0e35 Fix error case for bmake to echo 0.
MFC after:	1 week
Sponsored by:	EMC / Isilon Storage Division
2015-11-16 20:31:00 +00:00
bdrewery
2d8570774c Avoid FSCHG for INSTALL_AS_USER as well.
PR:		194189
X-MFC-With:	r290628
MFC after:	2 weeks
Sponsored by:	EMC / Isilon Storage Division
2015-11-16 20:18:38 +00:00
rodrigc
4fa7625884 Add include of signal.h for signal() prototype. 2015-11-16 17:28:04 +00:00
rodrigc
bba159a487 Replace __svc_fdset with svc_fdset.
FreeBSD lacks __svc_fdset and __svc_fdsetsize.
2015-11-16 17:25:27 +00:00
rodrigc
68b3fb6aaf Do not use SA_LEN() to dereference sa_len.
FreeBSD lacks the SA_LEN() macro.
2015-11-16 17:11:11 +00:00
rodrigc
84a8f489f2 Add include of time.h for tzset() prototype. 2015-11-16 17:08:51 +00:00
rodrigc
aa02ae250d Replace __dead with __dead2.
FreeBSD lacks __dead.
2015-11-16 17:08:05 +00:00
rodrigc
1ca828578c Add include of sys/param.h for MAXHOSTNAMELEN 2015-11-16 17:06:33 +00:00
rodrigc
c20370bb1b Replace __dead with __dead2.
FreeBSD lacks __dead.
2015-11-16 17:03:52 +00:00
rodrigc
cbf7792efd Replace HOST_NAME_MAX with MAXHOSTNAMELEN.
FreeBSD lacks HOST_NAME_MAX.
2015-11-16 17:02:34 +00:00