r263317:
cxgbe(4): significant rx rework.
- More flexible cluster size selection, including the ability to fall
back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in
case an allocation of a larger size fails.
- A single get_fl_payload() function that assembles the payload into an
mbuf chain for any kind of freelist. This replaces two variants: one
for freelists with buffer packing enabled and another for those without.
- Buffer packing with any sized cluster. It was limited to 4K clusters
only before this change.
- Enable buffer packing for TOE rx queues as well.
- Statistics and tunables to go with all these changes. The driver's
man page will be updated separately.
r263412:
cxgbe(4): if_iqdrops statistic should include tunnel congestion drops.
r263451:
cxgbe(4): man page updates.
This includes r265236, r265237, r265241 and r265261:
------------------------------------------------------------------------
r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines
Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.
Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.
o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.
o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.
Thanks to LSI for developing and testing this driver for FreeBSD.
share/man/man4/mpr.4:
mpr(4) man page.
sys/dev/mpr/*:
mpr(4) driver files.
sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.
sys/conf/files:
Add the mpr(4) driver.
sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.
sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.
sys/i386/conf/XEN:
Exclude the mpr module from building here.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
------------------------------------------------------------------------
------------------------------------------------------------------------
r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines
Add the mpr(4) man page to the man4 Makefile.
This should have been included in r265236.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Sponsored by: LSI, Spectra Logic
------------------------------------------------------------------------
------------------------------------------------------------------------
r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines
Use our standard SYNOPSIS wording; perform some cleanup while here.
------------------------------------------------------------------------
------------------------------------------------------------------------
r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines
Add a missing colon.
------------------------------------------------------------------------
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
- Add the Asus USB-N10 NANO [1]
- Fix panic by adding mtx_assert() to urtwn_init_locked() and
urtwn_stop_locked() [2]
Tested by: Kuan-Chung Chiu <buganini@gmail.com> [1]
Anthony Jenkins <scoobi_doo at yahoo dot com> [2]
r264010: Support speeds up to 12mbaud on newer chips.
r264031: Use 2K IO buffers for improved throughput.
r264149: Add ioctl(2) calls to access bitbang, MPSSE, CPU_FIFO,
and other modes.
Add Tx/Rx multiqueue support to vmx(4)
As a prerequisite for multiple queues, the guest must have MSIX enabled.
Unfortunately, to work around device passthrough bugs, FreeBSD disables
MSIX when running as a VMWare guest due to the hw.pci.honor_msi_blacklist
tunable; this tunable must be disabled for multiple queues.
Also included is various minor changes from the projects/vmxnet branch.
MFC r264865
Update the date that was missed in r263259
- r258014 Document WITH_TESTS src.conf(5) option.
- r263089 Fix description of WITHOUT_BMAKE's purpose.
- r264408 Fix test suite name in src.conf(5).
- r264410 Document how to install the test suite.
- r264412 Add FreeBSD 10.1 to the list of recognized releases for Fx.
- r264413 Miscellaneous fixes to tests(7).
Remove support of LUN-based CD changers from cd(4) driver.
This code was heavily broken few months ago during CAM locking changes.
Fixing it would require almost complete rewrite. Since there are no
known devices on market using this interface younger then ~15 years, and
they are CD, not even DVD, I don't see much reason to rewrite it.
This change does not mean those devices won't work. They will just work
slower due to inefficient disks load/unload schedule if several LUNs
accessed same time.
- r263161 Make bsd.test.mk the only public mk fragment for the building of tests.
- r263172 Move FreeBSD Test Suite-specific code to a suite.test.mk file.
- r263204 Add some documentation for bsd.test.mk.
- r263217 Document support for TAP-compliant Perl test programs.
This is "make tinderbox" clean.
Add SRC_UPDATE_SKIP, DOC_UPDATE_SKIP, and PORTS_UPDATE_SKIP
variables. These are intended to allow bypassing the
'svn co /usr/{src,doc,ports}' step in the chroot when the
tree exists from external means.
The use case here is that /usr/src, /usr/doc, and /usr/ports
in the chroot exist as result of zfs dataset clones, so it
is possible (and happens quite often) that the included
distributions may not be consistent. (This is not the case
for -RELEASE builds, but does happen for snapshot builds.)
Sponsored by: The FreeBSD Foundation
Add a SUBDIR_PARALLEL option to bsd.subdir.mk, to allow make to process
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC r263833:
Enable parallel building for gnu/usr.bin and usr.bin/clang too.
r264027:
Add a new release build variable, WITH_COMPRESSED_IMAGES.
When set to a non-empty value, the installation medium is
compressed as part of the 'install' target in the release/
directory.
r264028:
Clean up trailing whitespace in release/Makefile.
r264029:
Fix logic error.
r264030:
If WITH_COMPRESSED_IMAGES is set, add the compressed images
to the CLEANFILES list.
r264046:
Use xz(1) instead of gzip(1) to compress release images
when WITH_COMPRESSED_IMAGES is used.
r264073:
Allow overriding xz(1) path.
Sponsored by: The FreeBSD Foundation
r262810:
Merge enabling building FreeBSD/arm images as part of the
release build process.
r262862:
Provide backwards-compatibility with release.conf SVNROOT
entries that do not have a trailing '/'.
r264105:
Add ZEDBOARD support for release builds.
* Local modifications:
- Set SRCBRANCH from head/ to stable/10/.
- Strip svn:merginfo from ^/projects/release-embedded to avoid
pollution.
Sponsored by: The FreeBSD Foundation
share/man/man7/tests.7
Added a section on test suite configuration, and cleaned up up grammar
errors and awkward prose. The config variables were discussed on
freebsd-testing.
Merge the projects/clang-sparc64 branch back to head. This brings in
several updates from the llvm and clang trunks to make the sparc64
backend fully functional.
Apart from one patch to sys/sparc64/include/pcpu.h which is still under
discussion, this makes it possible to let clang fully build world and
kernel for sparc64.
Any assistance with testing this on actual sparc64 hardware is greatly
appreciated, as there will unavoidably be bugs left.
Many thanks go to Roman Divacky for his upstream work on getting the
sparc64 backend into shape.
MFC r262985:
Repair a few minor mismerges from r262261 in the clang-sparc64 project
branch. This is also to minimize differences with upstream.
The NetBSD Foundation states "Third parties are encouraged to change the
license on any files which have a 4-clause license contributed to the
NetBSD Foundation to a 2-clause license."
This change removes clauses 3 and 4 from copyright / license blocks that
list The NetBSD Foundation as the only copyright holder.
Sponsored by: The FreeBSD Foundation
Upgrade our copy of llvm/clang to 3.4 release. This version supports
all of the features in the current working draft of the upcoming C++
standard, provisionally named C++1y.
The code generator's performance is greatly increased, and the loop
auto-vectorizer is now enabled at -Os and -O2 in addition to -O3. The
PowerPC backend has made several major improvements to code generation
quality and compile time, and the X86, SPARC, ARM32, Aarch64 and SystemZ
backends have all seen major feature work.
Release notes for llvm and clang can be found here:
<http://llvm.org/releases/3.4/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.4/tools/clang/docs/ReleaseNotes.html>
MFC 262121 (by emaste):
Update lldb for clang/llvm 3.4 import
This commit largely restores the lldb source to the upstream r196259
snapshot with the addition of threaded inferior support and a few bug
fixes.
Specific upstream lldb revisions restored include:
SVN git
181387 779e6ac
181703 7bef4e2
182099 b31044e
182650 f2dcf35
182683 0d91b80
183862 15c1774
183929 99447a6
184177 0b2934b
184948 4dc3761
184954 007e7bc
186990 eebd175
Sponsored by: DARPA, AFRL
MFC 262186 (by emaste):
Fix mismerge in r262121
A break statement was lost in the merge. The error had no functional
impact, but restore it to reduce the diff against upstream.
MFC 262303:
Pull in r197521 from upstream clang trunk (by rdivacky):
Use the integrated assembler by default on FreeBSD/ppc and ppc64.
Requested by: jhibbits
MFC 262611:
Pull in r196874 from upstream llvm trunk:
Fix a crash that occurs when PWD is invalid.
MCJIT needs to be able to run in hostile environments, even when PWD
is invalid. There's no need to crash MCJIT in this case.
The obvious fix is to simply leave MCContext's CompilationDir empty
when PWD can't be determined. This way, MCJIT clients,
and other clients that link with LLVM don't need a valid working directory.
If we do want to guarantee valid CompilationDir, that should be done
only for clients of getCompilationDir(). This is as simple as checking
for an empty string.
The only current use of getCompilationDir is EmitGenDwarfInfo, which
won't conceivably run with an invalid working dir. However, in the
purely hypothetically and untestable case that this happens, the
AT_comp_dir will be omitted from the compilation_unit DIE.
This should help fix assertions occurring with ports-mgmt/tinderbox,
when it is using jails, and sometimes invalidates clang's current
working directory.
Reported by: decke
MFC 262809:
Pull in r203007 from upstream clang trunk:
Don't produce an alias between destructors with different calling conventions.
Fixes pr19007.
(Please note that is an LLVM PR identifier, not a FreeBSD one.)
This should fix Firefox and/or libxul crashes (due to problems with
regparm/stdcall calling conventions) on i386.
Reported by: multiple users on freebsd-current
PR: bin/187103
MFC 263048:
Repair recognition of "CC" as an alias for the C++ compiler, since it
was silently broken by upstream for a Windows-specific use-case.
Apparently some versions of CMake still rely on this archaic feature...
Reported by: rakuco
MFC 263049:
Garbage collect the old way of adding the libstdc++ include directories
in clang's InitHeaderSearch.cpp. This has been superseded by David
Chisnall's commit in r255321.
Moreover, if libc++ is used, the libstdc++ include directories should
not be in the search path at all. These directories are now only used
if you pass -stdlib=libstdc++.
- Remove rt_metrics_lite and simply put its members into rtentry.
- Use counter(9) for rt_pksent (former rt_rmx.rmx_pksent). This
removes another cache trashing ++ from packet forwarding path.
- Create zini/fini methods for the rtentry UMA zone. Via initialize
mutex and counter in them.
- Fix reporting of rmx_pksent to routing socket.
- Fix netstat(1) to report "Use" both in kvm(3) and sysctl(3) mode.
r263105:
Add hyperv manual pages provided by Microsoft, formatted
for FreeBSD standards. Very little, if any, content was
modified.
r263106:
Connect the hyperv driver manuals to the build.
Sponsored by: The FreeBSD Foundation
Import libucl into head
UCL is heavily infused by nginx configuration as the example of a convenient
configuration system. However, UCL is fully compatible with JSON format and is
able to parse json files.
UCL is used by pkg(8) for its configuration file as well for the manifest format
in packages, it will be used in base for the pkg boostrap (signature checking
and configuration file parsing.)
libucl has been developped and is maintained by vsevolod@
Add fetch and patch to .PHONY and .NOTMAIN only if PORTNAME is defined.
Unconditional addition cause real fetch(1) and patch(1) programs are
builded every time.
- r260505 Allow tests to provide a Kyuafile when they relied on auto-generation.
- r260525 Respect the original layout of the atf-{c,c++} tests.
- r260526 Fix path to the process_helpers for the libatf-c++ tests.
- r260576 Generate and install pkg-config files for atf.
- r260577 Add atf pkg-config files from the vendor branch.
- r260584 Prevent misc_helpers from running as a test.
r261832:
Add cross references between rc.conf(5) and jail.conf(5).
r261833:
Add commas (,) to the list in the SEE ALSO section, to match most
other manuals.
r261834:
Bump .Dd forgotten in r261832.
r262499:
release.sh:
- Add a VCSCMD variable that defaults to 'svn checkout',
and update places 'svn co' is used directly.
- After sourcing a configuration file, prefix SRCBRANCH,
PORTBRANCH, and DOCBRANCH with the SVNROOT.
- Properly capitalize 'FreeBSD.org' in the default SVNROOT.
- Update Copyright.
release.conf.sample:
- Add an example to use git instead of svn, by nullifying
SVNROOT, and setting SRCBRANCH, DOCBRANCH, and PORTBRANCH
to the URL fo a git repository.
release.7:
- Document VCSCMD.
r262505:
In release/Makefile, remove exclusion of CVS directories in the
src/ and ports/ distributions.
While I am thinking about it, exclude .git directories for src/
and ports/, as somewhat of a followup to r262499.
r262507:
Chase r262505, and remove CVS exclusion from picobsd builds.
r262509:
Rework how WORLD_FLAGS and KERNEL_FLAGS are set, to remove an
unnecessary expr(1) call.
Sponsored by: The FreeBSD Foundation
