Commit Graph

98 Commits

Author SHA1 Message Date
John Baldwin
137f91e80f Convert all users of IF_ADDR_LOCK to use new locking macros that specify
either a read lock or write lock.

Reviewed by:	bz
MFC after:	2 weeks
2012-01-05 19:00:36 +00:00
John Baldwin
c6f4ea8062 When cancelling multicast timers on an interface, don't release the
reference on a group in the leaving state while iterating over the loop.
Instead, use the same approach used in igmp_ifdetach() and mld_ifdetach()
of placing the groups to free on pending release list and then releasing
the references after dropping the IF_ADDR_LOCK.  This closes an ugly race
where the code was dropping the lock in the middle of iterating over the
list.  It also fixes some additional potential use-after-free bugs since
the cancellation routine also applied other changes to the group after
dropping the reference.  Now those changes are performed before the
reference is dropped and the group is potentially freed.

Prodded to fix by:	glebius
Reviewed by:	bz
MFC after:	1 week
2012-01-03 20:34:52 +00:00
John Baldwin
f5b50e25ec Use TAILQ_FOREACH() instead of TAILQ_FOREACH_SAFE() for some loops that
do not modify the queues they iterate over.

Submitted by:	glebius
2012-01-03 16:22:29 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Dimitry Andric
3e288e6238 After some off-list discussion, revert a number of changes to the
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files.  A better long-term solution is
still being considered.  This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.

Changes reverted:

------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines

Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.

------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines

Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.

------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines

Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
Dimitry Andric
31c6a0037e Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
2010-11-14 20:38:11 +00:00
Bjoern A. Zeeb
544794507a Proper bracketing.
PR:		kern/151100
Submitted by:	SunMinghao (sunminghao hotmail.com)
MFC after:	3 days
2010-10-01 11:48:14 +00:00
Bruce M Simpson
fd963b9929 Fix a regression where DVMRP diagnostic traffic, such as that used
by mrinfo and mtrace, was dropped by the IGMP TTL check. IGMP control
traffic must always have a TTL of 1.

Submitted by:	Matthew Luckie
MFC after:	3 days
2010-04-27 14:14:21 +00:00
Robert Watson
530c006014 Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks.  Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by:	bz
Approved by:	re (vimage blanket)
2009-08-01 19:26:27 +00:00
Robert Watson
d0728d7174 Introduce and use a sysinit-based initialization scheme for virtual
network stacks, VNET_SYSINIT:

- Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will
  occur each time a network stack is instantiated and destroyed.  In the
  !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT.
  For the VIMAGE case, we instead use SYSINIT's to track their order and
  properties on registration, using them for each vnet when created/
  destroyed, or immediately on module load for already-started vnets.
- Remove vnet_modinfo mechanism that existed to serve this purpose
  previously, as well as its dependency scheme: we now just use the
  SYSINIT ordering scheme.
- Implement VNET_DOMAIN_SET() to allow protocol domains to declare that
  they want init functions to be called for each virtual network stack
  rather than just once at boot, compiling down to DOMAIN_SET() in the
  non-VIMAGE case.
- Walk all virtualized kernel subsystems and make use of these instead
  of modinfo or DOMAIN_SET() for init/uninit events.  In some cases,
  convert modular components from using modevent to using sysinit (where
  appropriate).  In some cases, do minor rejuggling of SYSINIT ordering
  to make room for or better manage events.

Portions submitted by:	jhb (VNET_SYSINIT), bz (cleanup)
Discussed with:		jhb, bz, julian, zec
Reviewed by:		bz
Approved by:		re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
Robert Watson
0a4747d4d0 Garbage collect vnet module registrations that have neither constructors
nor destructors, as there's no actual work to do.

In most cases, the constructors weren't needed because of the existing
protocol initialization functions run by net_init_domain() as part of
VNET_MOD_NET, or they were eliminated when support for static
initialization of virtualized globals was added.

Garbage collect dependency references to modules without constructors or
destructors, notably VNET_MOD_INET and VNET_MOD_INET6.

Reviewed by:	bz
Approved by:	re (vimage blanket)
2009-07-20 13:55:33 +00:00
Robert Watson
5ee847d3ac Reimplement and/or implement vnet list locking by replacing a mostly
unused custom mutex/condvar-based sleep locks with two locks: an
rwlock (for non-sleeping use) and sxlock (for sleeping use).  Either
acquired for read is sufficient to stabilize the vnet list, but both
must be acquired for write to modify the list.

Replace previous no-op read locking macros, used in various places
in the stack, with actual locking to prevent race conditions.  Callers
must declare when they may perform unbounded sleeps or not when
selecting how to lock.

Refactor vnet sysinits so that the vnet list and locks are initialized
before kernel modules are linked, as the kernel linker will use them
for modules loaded by the boot loader.

Update various consumers of these KPIs based on whether they may sleep
or not.

Reviewed by:	bz
Approved by:	re (kib)
2009-07-19 14:20:53 +00:00
Robert Watson
1e77c1056a Remove unused VNET_SET() and related macros; only VNET_GET() is
ever actually used.  Rename VNET_GET() to VNET() to shorten
variable references.

Discussed with:	bz, julian
Reviewed by:	bz
Approved by:	re (kensmith, kib)
2009-07-16 21:13:04 +00:00
Robert Watson
eddfbb763d Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator.  Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...).  This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack.  Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory.  Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy.  Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address.  When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by:  bz
Reviewed by:            bz, zec
Discussed with:         gnn, jamie, jeff, jhb, julian, sam
Suggested by:           peter
Approved by:            re (kensmith)
2009-07-14 22:48:30 +00:00
Robert Watson
8c0fec805f Modify most routines returning 'struct ifaddr *' to return references
rather than pointers, requiring callers to properly dispose of those
references.  The following routines now return references:

  ifaddr_byindex
  ifa_ifwithaddr
  ifa_ifwithbroadaddr
  ifa_ifwithdstaddr
  ifa_ifwithnet
  ifaof_ifpforaddr
  ifa_ifwithroute
  ifa_ifwithroute_fib
  rt_getifa
  rt_getifa_fib
  IFP_TO_IA
  ip_rtaddr
  in6_ifawithifp
  in6ifa_ifpforlinklocal
  in6ifa_ifpwithaddr
  in6_ifadd
  carp_iamatch6
  ip6_getdstifaddr

Remove unused macro which didn't have required referencing:

  IFP_TO_IA6

This closes many small races in which changes to interface
or address lists while an ifaddr was in use could lead to use of freed
memory (etc).  In a few cases, add missing if_addr_list locking
required to safely acquire references.

Because of a lack of deep copying support, we accept a race in which
an in6_ifaddr pointed to by mbuf tags and extracted with
ip6_getdstifaddr() doesn't hold a reference while in transmit.  Once
we have mbuf tag deep copy support, this can be fixed.

Reviewed by:	bz
Obtained from:	Apple, Inc. (portions)
MFC after:	6 weeks (portions)
2009-06-23 20:19:09 +00:00
Bjoern A. Zeeb
5736e6fb9d After cleaning up rt_tables from vnet.h and cleaning up opt_route.h
a lot of files no longer need route.h either. Garbage collect them.
While here remove now unneeded vnet.h #includes as well.
2009-06-23 17:03:45 +00:00
Bjoern A. Zeeb
8d8bc0182e After r193232 rt_tables in vnet.h are no longer indirectly dependent on
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.

Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
2009-06-08 19:57:35 +00:00
Marko Zec
403f4aa059 Unbreak options VIMAGE build.
Submitted by:	julian (mentor)
Approved by:	julian (mentor)
2009-06-06 12:43:13 +00:00
Robert Watson
bcf11e8d00 Move "options MAC" from opt_mac.h to opt_global.h, as it's now in GENERIC
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.

Discussed with:	pjd
2009-06-05 14:55:22 +00:00
Bruce M Simpson
b01c90a31a Merge fixes from p4:
* Tighten v1 query input processing.
 * Borrow changes from MLDv2 for how general queries are processed.
   * Do address field validation upfront before accepting input.
   * Do NOT switch protocol version if old querier present timer active.
 * Always clear IGMPv3 state in igmp_v3_cancel_link_timers().
 * Update comments.

Tested by:	deeptech71 at gmail dot com
2009-06-01 15:30:18 +00:00
Robert Watson
d4b5cae49b Reimplement the netisr framework in order to support parallel netisr
threads:

- Support up to one netisr thread per CPU, each processings its own
  workstream, or set of per-protocol queues.  Threads may be bound
  to specific CPUs, or allowed to migrate, based on a global policy.

  In the future it would be desirable to support topology-centric
  policies, such as "one netisr per package".

- Allow each protocol to advertise an ordering policy, which can
  currently be one of:

  NETISR_POLICY_SOURCE: packets must maintain ordering with respect to
    an implicit or explicit source (such as an interface or socket).

  NETISR_POLICY_FLOW: make use of mbuf flow identifiers to place work,
    as well as allowing protocols to provide a flow generation function
    for mbufs without flow identifers (m2flow).  Falls back on
    NETISR_POLICY_SOURCE if now flow ID is available.

  NETISR_POLICY_CPU: allow protocols to inspect and assign a CPU for
    each packet handled by netisr (m2cpuid).

- Provide utility functions for querying the number of workstreams
  being used, as well as a mapping function from workstream to CPU ID,
  which protocols may use in work placement decisions.

- Add explicit interfaces to get and set per-protocol queue limits, and
  get and clear drop counters, which query data or apply changes across
  all workstreams.

- Add a more extensible netisr registration interface, in which
  protocols declare 'struct netisr_handler' structures for each
  registered NETISR_ type.  These include name, handler function,
  optional mbuf to flow ID function, optional mbuf to CPU ID function,
  queue limit, and ordering policy.  Padding is present to allow these
  to be expanded in the future.  If no queue limit is declared, then
  a default is used.

- Queue limits are now per-workstream, and raised from the previous
  IFQ_MAXLEN default of 50 to 256.

- All protocols are updated to use the new registration interface, and
  with the exception of netnatm, default queue limits.  Most protocols
  register as NETISR_POLICY_SOURCE, except IPv4 and IPv6, which use
  NETISR_POLICY_FLOW, and will therefore take advantage of driver-
  generated flow IDs if present.

- Formalize a non-packet based interface between interface polling and
  the netisr, rather than having polling pretend to be two protocols.
  Provide two explicit hooks in the netisr worker for start and end
  events for runs: netisr_poll() and netisr_pollmore(), as well as a
  function, netisr_sched_poll(), to allow the polling code to schedule
  netisr execution.  DEVICE_POLLING still embeds single-netisr
  assumptions in its implementation, so for now if it is compiled into
  the kernel, a single and un-bound netisr thread is enforced
  regardless of tunable configuration.

In the default configuration, the new netisr implementation maintains
the same basic assumptions as the previous implementation: a single,
un-bound worker thread processes all deferred work, and direct dispatch
is enabled by default wherever possible.

Performance measurement shows a marginal performance improvement over
the old implementation due to the use of batched dequeue.

An rmlock is used to synchronize use and registration/unregistration
using the framework; currently, synchronized use is disabled
(replicating current netisr policy) due to a measurable 3%-6% hit in
ping-pong micro-benchmarking.  It will be enabled once further rmlock
optimization has taken place.  However, in practice, netisrs are
rarely registered or unregistered at runtime.

A new man page for netisr will follow, but since one doesn't currently
exist, it hasn't been updated.

This change is not appropriate for MFC, although the polling shutdown
handler should be merged to 7-STABLE.

Bump __FreeBSD_version.

Reviewed by:	bz
2009-06-01 10:41:38 +00:00
Marko Zec
ddd50c3439 Remove a bogus check that unintentionally slipped in r191816.
This change has no functional impact on nooptions VIMAGE builds.
Submitted by:	bz
2009-05-08 14:28:06 +00:00
Marko Zec
94e9f5a1c2 Remove unnecessary CURVNET_SET() calls where curvnet context is
(i.e. seems to be) already set.

This should reduce console noise due to curvnet recursion reports.

This change has no impact on nooptions VIMAGE builds.
Approved by:	julian (mentor)
2009-05-06 13:30:46 +00:00
Marko Zec
21ca7b57bd Change the curvnet variable from a global const struct vnet *,
previously always pointing to the default vnet context, to a
dynamically changing thread-local one.  The currvnet context
should be set on entry to networking code via CURVNET_SET() macros,
and reverted to previous state via CURVNET_RESTORE().  Recursions
on curvnet are permitted, though strongly discuouraged.

This change should have no functional impact on nooptions VIMAGE
kernel builds, where CURVNET_* macros expand to whitespace.

The curthread->td_vnet (aka curvnet) variable's purpose is to be an
indicator of the vnet context in which the current network-related
operation takes place, in case we cannot deduce the current vnet
context from any other source, such as by looking at mbuf's
m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc.  Moreover, so
far curvnet has turned out to be an invaluable consistency checking
aid: it helps to catch cases when sockets, ifnets or any other
vnet-aware structures may have leaked from one vnet to another.

The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros
was a result of an empirical iterative process, whith an aim to
reduce recursions on CURVNET_SET() to a minimum, while still reducing
the scope of CURVNET_SET() to networking only operations - the
alternative would be calling CURVNET_SET() on each system call entry.
In general, curvnet has to be set in three typicall cases: when
processing socket-related requests from userspace or from within the
kernel; when processing inbound traffic flowing from device drivers
to upper layers of the networking stack, and when executing
timer-driven networking functions.

This change also introduces a DDB subcommand to show the list of all
vnet instances.

Approved by:	julian (mentor)
2009-05-05 10:56:12 +00:00
Marko Zec
d7fcc52895 Unbreak options VIMAGE + nooptions INVARIANTS kernel builds.
Submitted by:	julian
Approved by:	julian (mentor)
2009-05-02 05:02:28 +00:00
Bruce M Simpson
31a3e65dc2 Fix a problem whereby enqueued IGMPv3 filter list changes would be
incorrectly output, if the RB-tree enumeration happened to reuse the
same chain for a mode switch: that is, both ALLOW and BLOCK records
were appended for the same group, in the same mbuf packet chain.

This was introduced during an mbuf chain layout bug fix involving
m_getptr(), which obviously cannot count from offset 0 on the
second pass through the RB-tree when serializing the IGMPv3
group records into the pending mbuf chain.

Cut over to KTR_INET for IGMPv3 CTR usage.
2009-04-29 10:12:01 +00:00
Marko Zec
093f25f8c8 In preparation for turning on options VIMAGE in next commits,
rearrange / replace / adjust several INIT_VNET_* initializer
macros, all of which currently resolve to whitespace.

Reviewed by:	bz (an older version of the patch)
Approved by:	julian (mentor)
2009-04-26 22:06:42 +00:00
Bruce M Simpson
b5fbc0b98f Now that IFF_NEEDSGIANT has been removed from the network
stack, catch up with this in IGMPv3 and remove dead code.
This has the side-effect of not being back-portable to RELENG_7
w/o further changes.
2009-04-19 08:14:21 +00:00
Robert Watson
bd88cce2ed Update stats in struct igmpstat using two new macros:
IGMPSTAT_ADD() and IGMPSTAT_INC(), rather than directly
manipulating the fields of the structure.  This will make it
easier to change the implementation of these statistics,
such as using per-CPU versions of the data structures.

MFC after:	3 days
2009-04-12 13:41:13 +00:00
Robert Watson
86425c62a0 Update stats in struct ipstat using four new macros, IPSTAT_ADD(),
IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly
manipulating the fields across the kernel.  This will make it easier
to change the implementation of these statistics, such as using
per-CPU versions of the data structures.

MFC after:	3 days
2009-04-11 23:35:20 +00:00
Bruce M Simpson
448895b7fc Fix mbuf chain layout pessimization:
in the case where a single mbuf is allocated due to
 m_getcl() returning NULL, we already call MH_ALIGN,
 so do not increment m->m_data in this case.

Found during MLDv2 port.
2009-04-04 15:32:23 +00:00
Bruce M Simpson
0fd99912de Do not obliterate QQI with MAXRESP.
Found during MLDv2 port.
2009-04-04 15:26:32 +00:00
Bruce M Simpson
5b35d05538 Don't call m_freem() after ip_output(), as it always consumes
the mbuf chain provided to it.

Found by:	Pierre Guinoiseau
2009-03-24 01:22:12 +00:00
Bruce M Simpson
56663a40eb Deal with the case where ifma_protospec may be NULL, during
any IPv4 multicast operations which reference it.

There is a potential race because ifma_protospec is set to NULL
when we discover the underlying ifnet has gone away. This write
is not covered by the IF_ADDR_LOCK, and it's difficult to widen
its scope without making it a recursive lock. It isn't clear why
this manifests more quickly with 802.11 interfaces, but does not
seem to manifest at all with wired interfaces.

With this change, the 802.11 related panics reported by sam@
and cokane@ should go away. It is not the right fix, that requires
more thought before 8.0.

Idea from:	sam
Tested by:	cokane
2009-03-17 14:41:54 +00:00
Bruce M Simpson
d10910e6ce Merge IGMPv3 and Source-Specific Multicast (SSM) to the FreeBSD
IPv4 stack.

Diffs are minimized against p4.
PCS has been used for some protocol verification, more widespread
testing of recorded sources in Group-and-Source queries is needed.
sizeof(struct igmpstat) has changed.

__FreeBSD_version is bumped to 800070.
2009-03-09 17:53:05 +00:00
Bjoern A. Zeeb
33553d6e99 For all files including net/vnet.h directly include opt_route.h and
net/route.h.

Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.

We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.

This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.
2009-02-27 14:12:05 +00:00
Bjoern A. Zeeb
4b79449e2f Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by:	brooks, gnn, des, zec, imp
Sponsored by:	The FreeBSD Foundation
2008-12-02 21:37:28 +00:00
Marko Zec
44e33a0758 Change the initialization methodology for global variables scheduled
for virtualization.

Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions.  As a rule,
initialization at instatiation for such variables should never be
introduced again from now on.  Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.

Essentialy, this change should have zero functional impact.  In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.

Discussed at:	devsummit Strassburg
Reviewed by:	bz, julian
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-11-19 09:39:34 +00:00
Dag-Erling Smørgrav
1ede983cc9 Retire the MALLOC and FREE macros. They are an abomination unto style(9).
MFC after:	3 months
2008-10-23 15:53:51 +00:00
Marko Zec
8b615593fc Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by:	julian, bz, brooks, zec
Reviewed by:	julian, bz, brooks, kris, rwatson, ...
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
Bjoern A. Zeeb
603724d3ab Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00
Robert Watson
b9b0dac33b Move towards more explicit support for various network protocol stacks
in the TrustedBSD MAC Framework:

- Add mac_atalk.c and add explicit entry point mac_netatalk_aarp_send()
  for AARP packet labeling, rather than using a generic link layer
  entry point.

- Add mac_inet6.c and add explicit entry point mac_netinet6_nd6_send()
  for ND6 packet labeling, rather than using a generic link layer entry
  point.

- Add expliict entry point mac_netinet_arp_send() for ARP packet
  labeling, and mac_netinet_igmp_send() for IGMP packet labeling,
  rather than using a generic link layer entry point.

- Remove previous genering link layer entry point,
  mac_mbuf_create_linklayer() as it is no longer used.

- Add implementations of new entry points to various policies, largely
  by replicating the existing link layer entry point for them; remove
  old link layer entry point implementation.

- Make MAC_IFNET_LOCK(), MAC_IFNET_UNLOCK(), and mac_ifnet_mtx global
  to the MAC Framework rather than static to mac_net.c as it is now
  needed outside of mac_net.c.

Obtained from:	TrustedBSD Project
2007-10-28 15:55:23 +00:00
Robert Watson
8640764682 Rename 'mac_mbuf_create_from_firewall' to 'mac_netinet_firewall_send' as
we move towards netinet as a pseudo-object for the MAC Framework.

Rename 'mac_create_mbuf_linklayer' to 'mac_mbuf_create_linklayer' to
reflect general object-first ordering preference.

Sponsored by:	SPARTA (original patches against Mac OS X)
Obtained from:	TrustedBSD Project, Apple Computer
2007-10-26 13:18:38 +00:00
Mike Silbersack
4b421e2daa Add FBSDID to all files in netinet so that people can more
easily include file version information in bug reports.

Approved by:	re (kensmith)
2007-10-07 20:44:24 +00:00
Robert Watson
ece4c06484 Improve style(9) conformance of igmp.c. 2006-12-04 00:41:48 +00:00
Robert Watson
aed5570872 Complete break-out of sys/sys/mac.h into sys/security/mac/mac_framework.h
begun with a repo-copy of mac.h to mac_framework.h.  sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.

This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.

Obtained from:	TrustedBSD Project
Sponsored by:	SPARTA
2006-10-22 11:52:19 +00:00
Andre Oppermann
ef39adf007 Consolidate all IP Options handling functions into ip_options.[ch] and
include ip_options.h into all files making use of IP Options functions.

From ip_input.c rev 1.306:
  ip_dooptions(struct mbuf *m, int pass)
  save_rte(m, option, dst)
  ip_srcroute(m0)
  ip_stripoptions(m, mopt)

From ip_output.c rev 1.249:
  ip_insertoptions(m, opt, phlen)
  ip_optcopy(ip, jp)
  ip_pcbopts(struct inpcb *inp, int optname, struct mbuf *m)

No functional changes in this commit.

Discussed with:	rwatson
Sponsored by:	TCP/IP Optimization Fundraise 2005
2005-11-18 20:12:40 +00:00
Andre Oppermann
34333b16cd Retire MT_HEADER mbuf type and change its users to use MT_DATA.
Having an additional MT_HEADER mbuf type is superfluous and redundant
as nothing depends on it.  It only adds a layer of confusion.  The
distinction between header mbuf's and data mbuf's is solely done
through the m->m_flags M_PKTHDR flag.

Non-native code is not changed in this commit.  For compatibility
MT_HEADER is mapped to MT_DATA.

Sponsored by:	TCP/IP Optimization Fundraise 2005
2005-11-02 13:46:32 +00:00
Robert Watson
dd5a318ba3 Introduce in_multi_mtx, which will protect IPv4-layer multicast address
lists, as well as accessor macros.  For now, this is a recursive mutex
due code sequences where IPv4 multicast calls into IGMP calls into
ip_output(), which then tests for a multicast forwarding case.

For support macros in in_var.h to check multicast address lists, assert
that in_multi_mtx is held.

Acquire in_multi_mtx around iteration over the IPv4 multicast address
lists, such as in ip_input() and ip_output().

Acquire in_multi_mtx when manipulating the IPv4 layer multicast addresses,
as well as over the manipulation of ifnet multicast address lists in order
to keep the two layers in sync.

Lock down accesses to IPv4 multicast addresses in IGMP, or assert the
lock when performing IGMP join/leave events.

Eliminate spl's associated with IPv4 multicast addresses, portions of
IGMP that weren't previously expunged by IGMP locking.

Add in_multi_mtx, igmp_mtx, and if_addr_mtx lock order to hard-coded
lock order in WITNESS, in that order.

Problem reported by:	Ed Maste <emaste at phaedrus dot sandvine dot ca>
MFC after:		10 days
2005-08-03 19:29:47 +00:00