Commit Graph

108 Commits

Author SHA1 Message Date
Gleb Smirnoff
5c39f7bdeb Bunch of fixes to pfsync(4) module load/unload:
o Make the pfsync.ko actually usable. Before this change loading it
  didn't register protosw, so was a nop. However, a module /boot/kernel
  did confused users.
o Rewrite the way we are joining multicast group:
  - Move multicast initialization/destruction to separate functions.
  - Don't allocate memory if we aren't going to join a multicast group.
  - Use modern API for joining/leaving multicast group.
  - Now the utterly wrong pfsync_ifdetach() isn't needed.
o Move module initialization from SYSINIT(9) to moduledata_t method.
o Refuse to unload module, unless asked forcibly.
o Improve a bit some FreeBSD porting code:
  - Use separate malloc type.
  - Simplify swi sheduling.

This change is probably wrong from VIMAGE viewpoint, however pfsync
wasn't VIMAGE-correct before this change, too.

Glanced at by:	bz
2012-01-09 08:50:22 +00:00
Michael Tuexen
78d9a31d3a The socket API only specifies SCTP for SOCK_SEQPACKET and
SOCK_STREAM, but not SOCK_DGRAM. So don't register it for
SOCK_DGRAM.
While there, fix some indentation.
2011-07-12 19:29:29 +00:00
Bjoern A. Zeeb
8d5a3ca77b Add FEATURE() definitions for IPv4 and IPv6 so that we can use
feature_present(3) to dynamically decide whether to use one or the
other family.

Reviewed by:	gnn
Sponsored by:	The FreeBSD Foundation
Sponsored by:	iXsystems
MFC after:	10 days
2011-05-25 00:34:25 +00:00
Bjoern A. Zeeb
acaeca65b3 Be less strict on includes than in r220746. We need in.h for both
INET or INET6 as it holds all the IPPROTO_* definitions needed
for the SYSCTL_NODE definitions.

Reviewed by:	gnn
Sponsored by:	The FreeBSD Foundation
Sponsored by:	iXsystems
MFC after:	5 days
2011-04-25 16:36:16 +00:00
Bjoern A. Zeeb
336d023b2e Make in_proto.c dependent on either inet or inet6.
While it does not provide any functionality for IPv6, it provides
the sysctl nodes for net.inet.* that a lot of functionality shared
between IPv4 and IPv6 depends on.  We cannot change these anymore
without breaking a lot of management and tuning.

In case of IPv6 only, we compile out everything but the sysctl node
declarations.

Reviewed by:	gnn
Sponsored by:	The FreeBSD Foundation
Sponsored by:	iXsystems
MFC After:	5 days
2011-04-17 16:35:16 +00:00
Will Andrews
54bfbd5153 Allow carp(4) to be loaded as a kernel module. Follow precedent set by
bridge(4), lagg(4) etc. and make use of function pointers and
pf_proto_register() to hook carp into the network stack.

Currently, because of the uncertainty about whether the unload path is free
of race condition panics, unloads are disallowed by default.  Compiling with
CARPMOD_CAN_UNLOAD in CFLAGS removes this anti foot shooting measure.

This commit requires IP6PROTOSPACER, introduced in r211115.

Reviewed by:	bz, simon
Approved by:	ken (mentor)
MFC after:	2 weeks
2010-08-11 00:51:50 +00:00
Bjoern A. Zeeb
82cea7e6f3 MFP4: @176978-176982, 176984, 176990-176994, 177441
"Whitspace" churn after the VIMAGE/VNET whirls.

Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.

Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.

This also removes some header file pollution for putatively
static global variables.

Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.

Reviewed by:	jhb
Discussed with:	rwatson
Sponsored by:	The FreeBSD Foundation
Sponsored by:	CK Software GmbH
MFC after:	6 days
2010-04-29 11:52:42 +00:00
Bjoern A. Zeeb
9802380e41 Split up ip_drain() into an outer lock and iterator part and
a "locked" version that will only handle a single network stack
instance. The latter is called directly from ip_destroy().

Hook up an ip_destroy() function to release resources from the
legacy IP network layer upon virtual network stack teardown.

Sponsored by:	ISPsystem
Reviewed by:	rwatson
MFC After:	5 days
2010-02-20 19:59:52 +00:00
Michael Tuexen
8518270e20 Get SCTP working in combination with VIMAGE.
Contains code from bz.
Approved by: rrs (mentor)
MFC after: 1 month.
2009-09-19 14:02:16 +00:00
Robert Watson
530c006014 Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks.  Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by:	bz
Approved by:	re (vimage blanket)
2009-08-01 19:26:27 +00:00
Robert Watson
d0728d7174 Introduce and use a sysinit-based initialization scheme for virtual
network stacks, VNET_SYSINIT:

- Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will
  occur each time a network stack is instantiated and destroyed.  In the
  !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT.
  For the VIMAGE case, we instead use SYSINIT's to track their order and
  properties on registration, using them for each vnet when created/
  destroyed, or immediately on module load for already-started vnets.
- Remove vnet_modinfo mechanism that existed to serve this purpose
  previously, as well as its dependency scheme: we now just use the
  SYSINIT ordering scheme.
- Implement VNET_DOMAIN_SET() to allow protocol domains to declare that
  they want init functions to be called for each virtual network stack
  rather than just once at boot, compiling down to DOMAIN_SET() in the
  non-VIMAGE case.
- Walk all virtualized kernel subsystems and make use of these instead
  of modinfo or DOMAIN_SET() for init/uninit events.  In some cases,
  convert modular components from using modevent to using sysinit (where
  appropriate).  In some cases, do minor rejuggling of SYSINIT ordering
  to make room for or better manage events.

Portions submitted by:	jhb (VNET_SYSINIT), bz (cleanup)
Discussed with:		jhb, bz, julian, zec
Reviewed by:		bz
Approved by:		re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
Bjoern A. Zeeb
7654a365db Add the explicit include of vimage.h to another five .c files still
missing it.

Remove the "hidden" kernel only include of vimage.h from ip_var.h added
with the very first Vimage commit r181803 to avoid further kernel poisoning.
2009-06-17 12:44:11 +00:00
VANHULLEBUS Yvan
7b495c4494 Added support for NAT-Traversal (RFC 3948) in IPsec stack.
Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry
Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele
(julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense
team, and all people who used / tried the NAT-T patch for years and
reported bugs, patches, etc...

X-MFC: never

Reviewed by:	bz
Approved by:	gnn(mentor)
Obtained from:	NETASQ
2009-06-12 15:44:35 +00:00
Bjoern A. Zeeb
8d8bc0182e After r193232 rt_tables in vnet.h are no longer indirectly dependent on
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.

Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
2009-06-08 19:57:35 +00:00
Marko Zec
bc29160df3 Introduce an infrastructure for dismantling vnet instances.
Vnet modules and protocol domains may now register destructor
functions to clean up and release per-module state.  The destructor
mechanisms can be triggered by invoking "vimage -d", or a future
equivalent command which will be provided via the new jail framework.

While this patch introduces numerous placeholder destructor functions,
many of those are currently incomplete, thus leaking memory or (even
worse) failing to stop all running timers.  Many of such issues are
already known and will be incrementaly fixed over the next weeks in
smaller incremental commits.

Apart from introducing new fields in structs ifnet, domain, protosw
and vnet_net, which requires the kernel and modules to be rebuilt, this
change should have no impact on nooptions VIMAGE builds, since vnet
destructors can only be called in VIMAGE kernels.  Moreover,
destructor functions should be in general compiled in only in
options VIMAGE builds, except for kernel modules which can be safely
kldunloaded at run time.

Bump __FreeBSD_version to 800097.
Reviewed by:	bz, julian
Approved by:	rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
Bruce M Simpson
d10910e6ce Merge IGMPv3 and Source-Specific Multicast (SSM) to the FreeBSD
IPv4 stack.

Diffs are minimized against p4.
PCS has been used for some protocol verification, more widespread
testing of recorded sources in Group-and-Source queries is needed.
sizeof(struct igmpstat) has changed.

__FreeBSD_version is bumped to 800070.
2009-03-09 17:53:05 +00:00
Bjoern A. Zeeb
33553d6e99 For all files including net/vnet.h directly include opt_route.h and
net/route.h.

Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.

We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.

This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.
2009-02-27 14:12:05 +00:00
Qing Li
6e6b3f7cbc This main goals of this project are:
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
   possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,

The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.

Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:

- Kip Macy revised the locking code completely, thus completing
  the last piece of the puzzle, Kip has also been conducting
  active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
  provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
  me maintaining that branch before the svn conversion
2008-12-15 06:10:57 +00:00
Marko Zec
385195c062 Conditionally compile out V_ globals while instantiating the appropriate
container structures, depending on VIMAGE_GLOBALS compile time option.

Make VIMAGE_GLOBALS a new compile-time option, which by default will not
be defined, resulting in instatiations of global variables selected for
V_irtualization (enclosed in #ifdef VIMAGE_GLOBALS blocks) to be
effectively compiled out.  Instantiate new global container structures
to hold V_irtualized variables: vnet_net_0, vnet_inet_0, vnet_inet6_0,
vnet_ipsec_0, vnet_netgraph_0, and vnet_gif_0.

Update the VSYM() macro so that depending on VIMAGE_GLOBALS the V_
macros resolve either to the original globals, or to fields inside
container structures, i.e. effectively

#ifdef VIMAGE_GLOBALS
#define V_rt_tables rt_tables
#else
#define V_rt_tables vnet_net_0._rt_tables
#endif

Update SYSCTL_V_*() macros to operate either on globals or on fields
inside container structs.

Extend the internal kldsym() lookups with the ability to resolve
selected fields inside the virtualization container structs.  This
applies only to the fields which are explicitly registered for kldsym()
visibility via VNET_MOD_DECLARE() and vnet_mod_register(), currently
this is done only in sys/net/if.c.

Fix a few broken instances of MODULE_GLOBAL() macro use in SCTP code,
and modify the MODULE_GLOBAL() macro to resolve to V_ macros, which in
turn result in proper code being generated depending on VIMAGE_GLOBALS.

De-virtualize local static variables in sys/contrib/pf/net/pf_subr.c
which were prematurely V_irtualized by automated V_ prepending scripts
during earlier merging steps.  PF virtualization will be done
separately, most probably after next PF import.

Convert a few variable initializations at instantiation to
initialization in init functions, most notably in ipfw.  Also convert
TUNABLE_INT() initializers for V_ variables to TUNABLE_FETCH_INT() in
initializer functions.

Discussed at:	devsummit Strassburg
Reviewed by:	bz, julian
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-12-10 23:12:39 +00:00
Marko Zec
44e33a0758 Change the initialization methodology for global variables scheduled
for virtualization.

Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions.  As a rule,
initialization at instatiation for such variables should never be
introduced again from now on.  Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.

Essentialy, this change should have zero functional impact.  In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.

Discussed at:	devsummit Strassburg
Reviewed by:	bz, julian
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-11-19 09:39:34 +00:00
Qing Li
e440aed958 This patch provides the back end support for equal-cost multi-path
(ECMP) for both IPv4 and IPv6. Previously, multipath route insertion
is disallowed. For example,

	route add -net 192.103.54.0/24 10.9.44.1
	route add -net 192.103.54.0/24 10.9.44.2

The second route insertion will trigger an error message of
"add net 192.103.54.0/24: gateway 10.2.5.2: route already in table"

Multiple default routes can also be inserted. Here is the netstat
output:

default		10.2.5.1	UGS	0	3074	bge0 =>
default		10.2.5.2	UGS	0	0	bge0

When multipath routes exist, the "route delete" command requires
a specific gateway to be specified or else an error message would
be displayed. For example,

	route delete default

would fail and trigger the following error message:

"route: writing to routing socket: No such process"
"delete net default: not in table"

On the other hand,

	route delete default 10.2.5.2

would be successful: "delete net default: gateway 10.2.5.2"

One does not have to specify a gateway if there is only a single
route for a particular destination.

I need to perform more testings on address aliases and multiple
interfaces that have the same IP prefixes. This patch as it
stands today is not yet ready for prime time. Therefore, the ECMP
code fragments are fully guarded by the RADIX_MPATH macro.
Include the "options  RADIX_MPATH" in the kernel configuration
to enable this feature.

Reviewed by:	robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
Mike Silbersack
4b421e2daa Add FBSDID to all files in netinet so that people can more
easily include file version information in bug reports.

Approved by:	re (kensmith)
2007-10-07 20:44:24 +00:00
George V. Neville-Neil
b2630c2934 Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC
option is now deprecated, as well as the KAME IPsec code.
What was FAST_IPSEC is now IPSEC.

Approved by: re
Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
George V. Neville-Neil
2cb64cb272 Commit IPv6 support for FAST_IPSEC to the tree.
This commit includes only the kernel files, the rest of the files
will follow in a second commit.

Reviewed by:    bz
Approved by:    re
Supported by:   Secure Computing
2007-07-01 11:41:27 +00:00
Robert Watson
2281b8f054 Remove IPX over IP tunneling support, which allows IPX routing over IP
tunnels, and was not MPSAFE.  The code can be easily restored in the
event that someone with an IPX over IP tunnel configuration can work
with me to test patches.

This removes one of five remaining consumers of NET_NEEDS_GIANT.

Approved by:	re (kensmith)
2007-06-13 14:01:43 +00:00
Bruce M Simpson
0948f0a28f Build PIM by default as part of the IPv4 multicast forwarding path.
Make PIM dynamically loadable by using encap_attach_func().
PIM may now be loaded into a GENERIC kernel.

Tested with:	ports/net/pimdd && tcpreplay && wireshark
Reviewed by:	Pavlin Radoslavov
2007-02-10 13:59:13 +00:00
Randall Stewart
f8829a4a40 Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by:	gnn
Approved by:	gnn
2006-11-03 15:23:16 +00:00
Andrew Thompson
73ff045c57 Add RFC 3378 EtherIP support. This change makes it possible to add gif
interfaces to bridges, which will then send and receive IP protocol 97 packets.
Packets are Ethernet frames with an EtherIP header prepended.

Obtained from:	NetBSD
MFC after:	2 weeks
2005-12-21 21:29:45 +00:00
Ruslan Ermilov
303989a2f3 Use sparse initializers for "struct domain" and "struct protosw",
so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
David E. O'Brien
31793d594b Match IPv6 and use a static struct pr_usrreqs nousrreqs. 2005-08-10 06:41:04 +00:00
Max Laier
6de8d9dc52 Export pfsyncstats via sysctl "net.inet.pfsync" in order to print them with
netstat (seperate commit).

Requested by:	glebius
MFC after:	1 week
2005-07-14 22:22:51 +00:00
Gleb Smirnoff
a97719482d Add CARP (Common Address Redundancy Protocol), which allows multiple
hosts to share an IP address, providing high availability and load
balancing.

Original work on CARP done by Michael Shalayeff, with many
additions by Marco Pfatschbacher and Ryan McBride.

FreeBSD port done solely by Max Laier.

Patch by:	mlaier
Obtained from:	OpenBSD (mickey, mcbride)
2005-02-22 13:04:05 +00:00
Warner Losh
c398230b64 /* -> /*- for license, minor formatting changes 2005-01-07 01:45:51 +00:00
Andre Oppermann
72584fd2c0 Convert IPDIVERT into a loadable module. This makes use of the dynamic loadability
of protocols.  The call to divert_packet() is done through a function pointer.  All
semantics of IPDIVERT remain intact.  If IPDIVERT is not loaded ipfw will refuse to
install divert rules and  natd will complain about 'protocol not supported'.  Once
it is loaded both will work and accept rules and open the divert socket.  The module
can only be unloaded if no divert sockets are open.  It does not close any divert
sockets when an unload is requested but will return EBUSY instead.
2004-10-19 21:14:57 +00:00
Andre Oppermann
dff3237ee5 Make use of the PROTO_SPACER functionality for dynamically loadable
protocols in inetsw[] and define initially eight spacer slots.

Remove conflicting declaration 'struct pr_usrreqs nousrreqs'.  It is
now declared and initialized in kern/uipc_domain.c.
2004-10-19 15:58:22 +00:00
Robert Watson
a4f757cd5d White space cleanup for netinet before branch:
- Trailing tab/space cleanup
- Remove spurious spaces between or before tabs

This change avoids touching files that Andre likely has in his working
set for PFIL hooks changes for IPFW/DUMMYNET.

Approved by:	re (scottl)
Submitted by:	Xin LI <delphij@frontfree.net>
2004-08-16 18:32:07 +00:00
Max Laier
7c1fe95333 Commit pf version 3.5 and link additional files to the kernel build.
Version 3.5 brings:
 - Atomic commits of ruleset changes (reduce the chance of ending up in an
   inconsistent state).
 - A 30% reduction in the size of state table entries.
 - Source-tracking (limit number of clients and states per client).
 - Sticky-address (the flexibility of round-robin with the benefits of
   source-hash).
 - Significant improvements to interface handling.
 - and many more ...
2004-06-16 23:24:02 +00:00
Warner Losh
f36cfd49ad Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 20:46:16 +00:00
Max Laier
ac9d7e2618 Re-remove MT_TAGs. The problems with dummynet have been fixed now.
Tested by: -current, bms(mentor), me
Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
Max Laier
36e8826ffb Backout MT_TAG removal (i.e. bring back MT_TAGs) for now, as dummynet is
not working properly with the patch in place.

Approved by: bms(mentor)
2004-02-18 00:04:52 +00:00
Max Laier
1094bdca51 This set of changes eliminates the use of MT_TAG "pseudo mbufs", replacing
them mostly with packet tags (one case is handled by using an mbuf flag
since the linkage between "caller" and "callee" is direct and there's no
need to incur the overhead of a packet tag).

This is (mostly) work from: sam

Silence from: -arch
Approved by: bms(mentor), sam, rwatson
2004-02-13 19:14:16 +00:00
Sam Leffler
252f24a2cf divert socket fixups:
o pickup Giant in divert_packet to protect sbappendaddr since it
  can be entered through MPSAFE callouts or through ip_input when
  mpsafenet is 1
o add missing locking on output
o add locking to abort and shutdown
o add a ctlinput handler to invalidate held routing table references
  on an ICMP redirect (may not be needed)

Supported by:	FreeBSD Foundation
2003-11-08 23:09:42 +00:00
Sam Leffler
87002f0dc1 hookup ctlinput for fast ipsec versions of esp+ah protocols
Supported by:	FreeBSD Foundation
2003-10-03 22:06:36 +00:00
Jeffrey Hsu
1e78ac216e 1. Basic PIM kernel support
Disabled by default. To enable it, the new "options PIM" must be
added to the kernel configuration file (in addition to MROUTING):

options	MROUTING		# Multicast routing
options	PIM			# Protocol Independent Multicast

2. Add support for advanced multicast API setup/configuration and
extensibility.

3. Add support for kernel-level PIM Register encapsulation.
Disabled by default.  Can be enabled by the advanced multicast API.

4. Implement a mechanism for "multicast bandwidth monitoring and upcalls".

Submitted by:	Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
Peter Wemm
3c6b084e96 Finish driving a stake through the heart of netns and the associated
ifdefs scattered around the place - its dead Jim!

The SMB stuff had stolen AF_NS, make it official.
2003-03-05 19:24:24 +00:00
Jonathan Lemon
340c35de6a Add a TCP TIMEWAIT state which uses less space than a fullblown TCP
control block.  Allow the socket and tcpcb structures to be freed
earlier than inpcb.  Update code to understand an inp w/o a socket.

Reviewed by: hsu, silby, jayanth
Sponsored by: DARPA, NAI Labs
2003-02-19 22:32:43 +00:00
Sam Leffler
e8539d32f0 FAST_IPSEC fixups:
o fix #ifdef typo
o must use "bounce functions" when dispatched from the protosw table

don't know how this stuff was missed in my testing; must've committed
the wrong bits

Pointy hat:	sam
Submitted by:	"Doug Ambrisko" <ambrisko@verniernetworks.com>
2002-11-08 23:37:50 +00:00
Sam Leffler
b9234fafa0 Tie new "Fast IPsec" code into the build. This involves the usual
configuration stuff as well as conditional code in the IPv4 and IPv6
areas.  Everything is conditional on FAST_IPSEC which is mutually
exclusive with IPSEC (KAME IPsec implmentation).

As noted previously, don't use FAST_IPSEC with INET6 at the moment.

Reviewed by:	KAME, rwatson
Approved by:	silence
Supported by:	Vernier Networks
2002-10-16 02:25:05 +00:00
Maxim Sobolev
8e96e13e6a Add a new gre(4) driver, which could be used to create GRE (RFC1701)
and MOBILE (RFC2004) IP tunnels.

Obrained from:  NetBSD
2002-09-06 17:12:50 +00:00
Alfred Perlstein
4d77a549fe Remove __P. 2002-03-19 21:25:46 +00:00