While here also reword 'show buffer' to have an 'addr' argument and to
match other struct documentation.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
implement options TERMINAL_{KERN,NORM}_ATTR. These are aliased to
SC_{KERNEL_CONS,NORM}_ATTR and like these latter, allow to change the
default colors of normal and kernel text respectively.
Note on the naming: Although affecting the output of vt(4), technically
kern/subr_terminal.c is primarily concerned with changing default colors
so it would be inconsistent to term these options VT_{KERN,NORM}_ATTR.
Actually, if the architecture and abstraction of terminal+teken+vt would
be perfect, dev/vt/* wouldn't be touched by this commit at all.
Reviewed by: emaste
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
- vt_vga(4) is a driver rather than a function so reference it accordingly.
- Uncomment HISTORY section given that vt(4) will first appear in 9.3.
Reviewed by: emaste (modulo last part)
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
With this change and previous work from ray@ it will be possible to put
both in GENERIC, and have one enabled by default, but allow the other to
be selected via the loader.
(The previous implementation had separate kern.vt.disable and
hw.syscons.disable tunables, and would panic if both drivers were
compiled in and neither was explicitly disabled.)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
separate argument structure with added level_type field for
CPUID_CPUID_COUNT request.
Reviewed by: attilio (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
performing cpuid calls.
Add also a new way to specify the level type to cpucontrol(8) as
reported in the manpage.
Sponsored by: EMC / Isilon storage division
Reviewed by: bdrewery, gcooper
Testerd by: bdrewery
o NR_REG_SW_NIC -> NR_REG_SW
o NR_RING_NIC_SW -> NR_REG_NIC_SW
o NETMAP_NO_TX_SYNC -> NETMAP_NO_TX_POLL
o NETMAP_DO_RX_SYNC -> NETMAP_DO_RX_POLL
I hope dear luigi has not left those as an excercise to careful
reader, in which case I apologize in advance for ruining his play.
MFC after: 1 week
through a voltage divisor (R163 and R164 on page 4 of BBB schematic).
Add a note about this on ti_adc(4) man page. The ti_adc(4) man page will
first appear on 10.1-RELEASE.
MFC after: 1 week
Suggested by: Sulev-Madis Silber (ketas)
Manual page reviewed by: brueffer (D127)
from the slave (for example, when master is failing on disk IO and could not be
logged into or execute cronjob).
Commented out examples changed too to simplify future merging.
Idea by: kaa@zvuki.ru
Discussed with: glebius
MFC after: 1 week
ismt(4) supports the SMBus Message Transport controller found on Intel
C2000 series (Avoton) and S1200 series (Briarwood) Atom SoCs.
Sponsored by: Intel
This driver supports the low and high precision models (9 and 11 bits) and
it will auto-detect the both variants.
The driver expose the temperature registers (actual temperature, shutdown
and hysteresys temperature) and also the configuration register.
It was tested on FDT systems: RPi, BBB and on non-FDT systems: AR71xx, with
both, hardware i2c controllers (when available) and gpioiic(4).
This provides a simple and cheap way for verifying the i2c bus on embedded
systems.
cards. LSI has been maintaining this driver outside of the FreeBSD
tree. It overlaps support of ThunderBolt and Invader cards that mfi(4)
supports. By default mfi(4) will attach to cards. If the tunable:
hw.mfi.mrsas_enable=1
is set then mfi(4) will not probe and attach to these newer cards and
allow mrsas(4) to attach. So by default this driver will not effect
a FreeBSD system unless mfi(4) is removed from the kernel or the
tunable is enabled.
mrsas(4) attaches disks to the CAM layer so it depends on CAM and devices
show up as /dev/daX. mfiutil(8) does not work with mrsas. The FreeBSD
version of MegaCli and StorCli from LSI do work with mrsas. It appears
that StorCli only works with mrsas. MegaCli appears to work with mfi(4)
and mrsas(4).
It would be good to add mfiutil(4) support to mrsas, emulations modes,
kernel logging, device aliases to ease the transition between mfi(4)
and mrsas(4).
Style issues should be resolved by LSI when they get committers approved.
The plan is get this driver in FreeBSD 9.3 to improve HW support.
Thanks to LSI for developing, testing and working with FreeBSD to
make this driver co-exist in FreeBSD. This improves the overall
support of MegaRAID SAS.
Submitted by: Kashyap Desai <Kashyap.Desai@lsi.com>
Reviewed by: scottl
MFC after: 3 days
Sponsored by: LSI
This should have been included in r265236.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Sponsored by: LSI, Spectra Logic
