3653 Commits

Author SHA1 Message Date
jhb
da9c015b52 Teach the mfi(4) driver to handle requests from userland management
applications to add and remove volumes.

MFC after:	1 week
Approved by:	re (bmah)
Reviewed by:	ambrisko, scottl
2007-08-13 19:29:17 +00:00
danger
f71966e242 Sync with the source code: NGM_FEC_MODE_(MAC|INET) should be
NGM_FEC_SET_MODE_(MAC|INET).

Approved by: re@ (bmah)
2007-08-12 16:02:30 +00:00
njl
6fbfdc2928 Add "show sysregs" command to ddb. On i386, this gives gdt, idt, ldt,
cr0-4, etc.  Support should be added for other platforms that have a
different set of registers for system use.

Loosely based on: OpenBSD
Approved by:	re
2007-08-09 20:14:35 +00:00
bz
3793d89229 Rename option IPSEC_FILTERGIF to IPSEC_FILTERTUNNEL.
Also rename the related functions in a similar way.
There are no functional changes.

For a packet coming in with IPsec tunnel mode, the default is
to only call into the firewall with the "outer" IP header and
payload.

With this option turned on, in addition to the "outer" parts,
the "inner" IP header and payload are passed to the
firewall too when going through ip_input() the second time.

The option was never only related to a gif(4) tunnel within
an IPsec tunnel and thus the name was very misleading.

Discussed at:			BSDCan 2007
Best new name suggested by:	rwatson
Reviewed by:			rwatson
Approved by:			re (bmah)
2007-08-05 16:16:15 +00:00
maxim
71c15430c3 o Iomage -> Iomega.
PR:		docs/115208
Submitted by:	John Nielsen
Approved by:	re (kensmith)
MFC after:	1 week
2007-08-05 07:39:30 +00:00
bz
af31819812 Remove fast_ipsec.4. Was merged in parts to ipsec.4.
Approved by:    re (bmah)
2007-08-02 08:05:56 +00:00
bz
e911ed379e Remove the last entries to fast_ipsec.
Merge in parts of the old fast_ipsec.4 man page to ipsec.4 and
start updating ipsec.4 man page.

Reviewed by:	brueffer, sam (slightly earlier versions), bmah
Approved by:	re (bmah)
2007-08-02 08:04:48 +00:00
mav
86e4cc2cc9 Add 64bit statistic counters to the ng_ppp node.
64bit counters are needed to simplify traffic accounting and
reduce system load at the big PPP concentrators.

Approved by:	re (rwatson), glebius (mentor)
2007-08-01 20:49:35 +00:00
thompsa
35be053112 - Propagate the largest set of interface capabilities supported by all lagg
ports to the lagg interface.
- Use the MTU from the first interface as the lagg MTU, all extra interfaces
  must be the same.

This fixes using a lagg interface for a vlan or enabling jumbo frames, etc.

Approved by:	re (kensmith)
MFC After:	3 days
2007-07-30 20:17:22 +00:00
brueffer
4177278d87 First round of cleanups.
Approved by:	re (blanket)
2007-07-24 18:08:16 +00:00
scottl
08b4d87cfe Introduce Danny Braniss' iSCSI initiator, version 2.0.99. Please read the
included man pages on how to use it.  This code is still somewhat experimental
but has been successfully tested on a number of targets.  Many thanks to
Danny for contributing this.

Approved by: re
2007-07-24 15:35:02 +00:00
imp
6efbeeeff5 Add some additional cross references.
Approved by: re@ (blanket)
2007-07-24 14:51:21 +00:00
imp
28d05b4684 Add ChanTou ST268 USB NIC
PR: 114860
Approved by: re@ (blanket)
2007-07-24 14:49:25 +00:00
ambrisko
5a67dd7c20 Add support to the ipmi, isa attachment to attempt to read ipmi
config info. from device.hints.  Some machines have ipmi controllers
that do not have attachment info in either PCI, SMBIOS or ACPI.
This idea was hacked together by me and then done properly by
jhb.

Submitted by:	jhb
Reviewed by:	jhb (man page)
Approved by:	re (Ken Smith)
MFC after:	1 week
2007-07-16 17:03:48 +00:00
joel
d9a65cda92 Document support for Intel 82801I and Realtek ALC268.
Approved by:	re
2007-07-14 12:35:29 +00:00
imp
1a85d9fd6e Add another SMC device.
Submitted by: ken wongk at abo dot dnsalias stop org
PR: 66343
Approved by: re@ (hrs)
2007-07-11 04:17:02 +00:00
thompsa
384e40af76 Remove wicontrol(8) from the base system. Using wicontrol to configure an
interface has been deprecated since 5.1, wi(4) wireless interfaces are managed
via the net80211 stack and ifconfig.

Approved by:	re (rwatson)
2007-07-01 10:25:07 +00:00
brueffer
0d533de8be The driver will also first appear in 6.3. While here, fix some
grammar issues and capitalize Jumbo Frames.

Approved by:	re (blanket)
MFC after:	3 days
2007-07-01 09:42:47 +00:00
imp
bd972a0f8f Note the change in /dev name
Submitted By: Kay Abendroth
PR: usb/106070
Approved by: re (blanket)
2007-06-30 14:36:37 +00:00
brueffer
372bca22d2 Capitalize a few terms.
Approved by:	re (blanket)
2007-06-30 13:36:33 +00:00
brueffer
f918a53265 General cleanup.
Approved by:	re (blanket)
2007-06-30 07:28:39 +00:00
imp
a624ee3103 uhid.4: correct structure field names to match dev/usb/usb.h
Submitted by: Dmitry Marakasov
PR: 101757
Approved by: re (blanket)
2007-06-30 05:07:51 +00:00
sam
6698e7dea2 Neterion Xframe 10GbE Server/Storage adapter driver.
The nxge driver provides support for Neterion Xframe-I and Xframe-II
adapters. The driver supports TCP Segmentation Offload (TSO/LSO),
Jumbo frames (5 buffer mode), Header separation (2 and 3 Receive
buffer modes), VLAN, and Promiscuous mode.

Submitted by:	Neterion
Reviewed by:	rwatson
Approved by:	re (kensmith)
2007-06-29 22:47:18 +00:00
remko
b6308c8f70 Fix reference within TIOCNOTTY from TIOSCTTY to TIOCSCTTY.
PR:		docs/114058
Submitted by:	David Sanderson <dsanderson at panasas dot com>
Approved by:	re (bmah)
MFC After:	3 days
2007-06-27 15:14:06 +00:00
kevlo
f1e459f03d Remove a section on the area of the debugging sysctls used to tune
enforcement.

Approved by: re (rwatson)
2007-06-27 09:32:50 +00:00
brueffer
e6392f10ab Document hw.bce.msi_enable tunable.
Approved by:	re (blanket)
2007-06-24 18:36:07 +00:00
joel
2ee5e24fd1 Document two new sysctls: hw.snd.compat_linux_mmap and hw.snd.default_auto.
Reviewed by:	ariff
Approved by:	re (hrs)
2007-06-23 14:34:30 +00:00
simokawa
ad15405e79 Document hw.firewire.phydma_enable knob. 2007-06-17 10:40:25 +00:00
kevlo
8a6947e206 Add a man page for wlan_amrr
Reviewed by: sam, sephe
2007-06-15 04:41:15 +00:00
brueffer
160d2fe326 Add a missing Va option. 2007-06-14 05:32:23 +00:00
brueffer
9036a65728 Major update for the recently overhauled nfe(4) driver.
Reviewed by:	yongari
2007-06-13 08:44:37 +00:00
bms
ffd77d9ba5 Import rewrite of IPv4 socket multicast layer to support source-specific
and protocol-independent host mode multicast. The code is written to
accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work.

This change only pertains to FreeBSD's use as a multicast end-station and
does not concern multicast routing; for an IGMPv3/MLDv2 router
implementation, consider the XORP project.

The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6,
which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html

Summary
 * IPv4 multicast socket processing is now moved out of ip_output.c
   into a new module, in_mcast.c.
 * The in_mcast.c module implements the IPv4 legacy any-source API in
   terms of the protocol-independent source-specific API.
 * Source filters are lazy allocated as the common case does not use them.
   They are part of per inpcb state and are covered by the inpcb lock.
 * struct ip_mreqn is now supported to allow applications to specify
   multicast joins by interface index in the legacy IPv4 any-source API.
 * In UDP, an incoming multicast datagram only requires that the source
   port matches the 4-tuple if the socket was already bound by source port.
   An unbound socket SHOULD be able to receive multicasts sent from an
   ephemeral source port.
 * The UDP socket multicast filter mode defaults to exclusive, that is,
   sources present in the per-socket list will be blocked from delivery.
 * The RFC 3678 userland functions have been added to libc: setsourcefilter,
   getsourcefilter, setipv4sourcefilter, getipv4sourcefilter.
 * Definitions for IGMPv3 are merged but not yet used.
 * struct sockaddr_storage is now referenced from <netinet/in.h>. It
   is therefore defined there if not already declared in the same way
   as for the C99 types.
 * The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF
   which are then interpreted as interface indexes) is now deprecated.
 * A patch for the Rhyolite.com routed in the FreeBSD base system
   is available in the -net archives. This only affects individuals
   running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces.
 * Make IPv6 detach path similar to IPv4's in code flow; functionally same.
 * Bump __FreeBSD_version to 700048; see UPDATING.

This work was financially supported by another FreeBSD committer.

Obtained from:  p4://bms_netdev
Submitted by:   Wilbert de Graaf (original work)
Reviewed by:    rwatson (locking), silence from fenner,
		net@ (but with encouragement)
2007-06-12 16:24:56 +00:00
joel
d6014e5948 - Document support for Realtek ALC660 and Analog Devices AD1988B.
- Fix minor typos.
2007-06-12 15:26:41 +00:00
yongari
10581f5bf9 Xref altq(4). 2007-06-12 02:19:56 +00:00
yongari
eae6e955ab nfe(4) supports altq(4). 2007-06-12 02:19:11 +00:00
yongari
ed1c784ed6 Add nfe(4) to the list of device drivers use the miibus interface. 2007-06-12 02:18:04 +00:00
remko
65814a95bc Specify which Dlink chip is supported (D-Link DUB-E100 ver A) because
others (D-Link DUB-E100 ver B1) are not.

PR:		docs/109664
Submitted by:	Martin Nilsson<martin at mullet dot se>
Patch by:	asmodai
MFC after:	1 week
2007-06-06 19:27:10 +00:00
kevlo
eb254d57c3 Update rum driver that needs wlan(4). 2007-06-06 07:58:03 +00:00
jeff
f2eba6cb68 - ULE is no longer buggy or experimental. 2007-06-05 01:31:04 +00:00
delphij
a640564bf1 sched_core(4) removed. 2007-06-05 01:10:47 +00:00
brueffer
3f6ea62ed6 Xref altq(4). 2007-06-04 16:59:11 +00:00
yongari
f5e3f2b6d0 gem(4) supports altq(4) now. 2007-06-04 06:01:57 +00:00
philip
cc8a26996a Add support for Asus A3N laptops.
Submitted by:	Holger Jorra <holger_jorra -at- gmx.net>
MFC after:	1 day
2007-06-02 21:10:01 +00:00
joel
2e12909782 Document recent improvements to the sound infrastructure (virtual recording
channels, changed sysctl's and device nodes etc).

Reviewed by:	ariff
2007-05-31 20:26:39 +00:00
glebius
b1c254898d - Sync with ng_bpf.h, rev. 1.7
- Remove extra brace.

Submitted by:	Anton Yuzhaninov <citrin rambler-co.ru>
2007-05-30 09:05:49 +00:00
joel
6ad5b76067 Add AK4396 to the list of supported codecs. 2007-05-28 16:00:08 +00:00
joel
e08cd76db9 Document support for the following sound cards:
- AudioTrak Prodigy HD2
- AudioTrak Prodigy 7.1 XT
- ESI Juli@

Reminded by:	brueffer
2007-05-28 15:57:22 +00:00
imp
522efc6cb4 Add man pages for mmc (the mmc bus) and mmcsd (the memory card
implementation).
2007-05-27 05:01:19 +00:00
yar
60ab7af625 Fix a formatting error: the list of control packets ends earlier. 2007-05-24 09:43:41 +00:00
jkim
5a606c9586 Remove BCM5704S specific tunable (hw.bge.fake_autoneg) and
auto-detect the condition.
2007-05-22 19:35:34 +00:00