Replace hardcoded sizes by nitems and sizeof
Replace CTLFLAG_NEEDGIANT with CTLFLAG_MPSAFE, I run this driver since a few
years with CTLFLAG_MPSAFE w/o issues.
32-bit Book-E doesn't set UMA_MD_SMALL_ALLOC, and 32-bit OEA platforms
have a 32-bit vm_paddr_t. Moreover, this code was wrong in that it
leaked the page if the check failed.
Reviewed by: jhibbits
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23991
Port aacraid driver to big-endian (BE) hosts.
The immediate goal of this change is to make it possible to use the
aacraid driver on PowerPC64 machines that have Adaptec Series 8 SAS
controllers.
Adapters supported by this driver expect FIB contents in little-endian
(LE) byte order. All FIBs have a fixed header part as well as a data
part that depends on the command being issued to the controller.
In this way, on BE hosts, the FIB header and all FIB data structures
used in aacraid.c and aacraid_cam.c need to be converted to LE before
being sent to the adapter and converted to BE when coming from it.
The functions to convert each struct are on aacraid_endian.c.
For little-endian (LE) targets, they are macros that expand
to nothing.
In some cases, when only a few fields of a large structure are used,
the fields are converted inline, by the code using them.
PR: 237463
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23887
Fix panic "Freeing UMA block at 0xn with no associated page".
Also replaces pmap_remove call by pmap_kremove, for symmetry.
Reviewed by: jhibbits
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D23931
If NUMA is not enabled in the kernel config, or is disabled at boot, this
function should just return domain 0 regardless of what's in the device
tree.
Fixes a panic in iflib with NUMA disabled.
Reported by: luporl
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Since powerpc64 has such a large virtual address space, significantly larger
than its physical address space, take advantage of this, and create yet
another DMAP-like instance for the device mappings. In this case, the
device mapping "DMAP" is in the 0x8000000000000000 - 0xc000000000000000
range, so as not to overlap the physical memory DMAP.
This will allow us to add TLB1 entry coalescing in the future, especially
useful for things like the radeonkms driver, which maps parts of the GPU at
a time, but eventually maps all of it, using up a lot of TLB1 entries (~40).
ptbl_alloc() is expected to return with the pvh_global_lock and pmap
lock held. However, it will return with them unlocked if nosleep is
specified.
Along with this, fix lock ordering of pvh_global_lock with respect to
the pmap lock in other places.
Differential Revision: https://reviews.freebsd.org/D23692
PR: 244118
Reported by: Francis Little <oggy at farscape.co.uk>
Tested by: Francis Little, Mark Millard <marklmi at yahoo.com>
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23729
Disable new clang 10.0.0 warnings about misleading indentation in
sys/contrib/ncsw/Peripherals/FM/fman_ncsw.c.
This is horribly formatted contributed code, and fixing it is not worth
the effort.
MFC after: 3 days
We somewhat blindly copy the srr1 from the new context to the trap frame,
but disable FPU and VSX unconditionally, relying on the trap to re-enable
them. This works because the FPU manages the VSX extended FP registers,
which is governed by the PCB_FPFREGS flag. However, with altivec, we
would blindly disable PSL_VEC, without touching PCB_VEC. Handle this case
by disabling altivec in both srr1 and pcb_flags, if the mcontext doesn't
have _MC_AV_VALID set.
Reported by: pkubaj
This reverts r177661. The change is no longer very useful since
out-of-tree KLDs will be built to target SMP kernels anyway. Moveover
it breaks the KBI in !SMP builds since cpuset_t's layout depends on the
value of MAXCPU, and several kernel interfaces, notably
smp_rendezvous_cpus(), take a cpuset_t as a parameter.
PR: 243711
Reviewed by: jhb, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23512
Remove mbuf_jumbo_alloc and let large mbuf zones use the new uma default
contig allocator (a copy of mbuf_jumbo_alloc). Tag other zones which
require contiguous objects, even if they don't use the new default
contig allocator, so that uma knows about their constraints.
Reviewed by: jeff, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23238
In r356767, memcpy/memmove/bcopy optimizations were added to libc to
improve performance.
This exposed an existing kernel issue in VSX handling. The PSL_VSX flag was
not being excluded from the psl_userstatic set, which meant that any thread
that used these and then called swapcontext(3) would get an EINVAL error.
Fixing this exposed a second issue - in r344123, the FPU was being forced
off in set_mcontext(). However, this was neglecting to ensure VSX was turned
off at the same time.
While here, add some code comments to explain what's going on.
Reviewed by: jhibbits, luporl (earlier rev), pkubaj (earlier rev)
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23497
After r355784 the td_oncpu field is no longer synchronized by the thread
lock, so the stack capture interrupt cannot be delievered precisely.
Fix this using a loop which drops the thread lock and restarts if the
wrong thread was sampled from the stack capture interrupt handler.
Change the implementation to use a regular interrupt instead of an NMI.
Now that we drop the thread lock, there is no advantage to the latter.
Simplify the KPIs. Remove stack_save_td_running() and add a return
value to stack_save_td(). On platforms that do not support stack
capture of running threads, stack_save_td() returns EOPNOTSUPP. If the
target thread is running in user mode, stack_save_td() returns EBUSY.
Reviewed by: kib
Reported by: mjg, pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23355
On some POWER8 machines, 'ibm,associativity' property may have 6
cells, which would overflow the 5 cells buffer being used.
There was also an issue with the "check if node is root" part,
that have been fixed too.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D23414
Summary:
The CPLD is the communications medium between the CPU and the XMOS
"Xena" event coprocessor. It provides a mailbox communication feature,
along with dual-port RAM to be used between the CPU and XMOS. Also, it
provides basic board stats as well, such as PCIe presence, JTAG signals,
and CPU fan speed reporting (in revolutions per second). Only fan speed
reading is handled, as a sysctl.
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D23136
Summary:
This fixes kernel crashing when tunable "machdep.moea64_bpvo_pool_size" is
set to a value higher then 327680 (default value). Function
moea64_mid_bootstrap() relies on moea64_bpvo_pool_size, but at time of the
use the variable wan't yet updated with the new value provided by user.
Problem was detected after trying to use a VM with 64GB of RAM, and default
moea64_bpvo_pool_size is insufficient (kernel boot used more than 470000) .
I think default value must be discussed to address this use case, or find a
way to calculate pool size automatically based on amount of memory detected.
Test Plan: Tested on QEMU VM with 64GB of RAM using "set
machdep.moea64_bpvo_pool_size=655360" on loader prompt
Submitted by: Alfredo Dal'Ava Júnior (alfredo.junior_eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23233
In rS354701, I replaced text relocations with offsets from &generictrap.
Unfortunately, the magic variable I was using doesn't actually mean the
address of &generictrap, in bridge mode it actually means &generictrap64.
So, for bridge mode to work, it is necessary to differentiate between
"where do we need to branch to to handle a trap" and "where is &generictrap
for purposes of doing relative math".
Introduce a new TRAP_ENTRY and use it instead of TRAP_GENTRAP for doing
actual calls to the generic trap handler.
Reported by: Mark Millard <marklmi@yahoo.com>
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23057
> Description of fields to fill in above: 76 columns --|
> PR: If and which Problem Report is related.
> Submitted by: If someone else sent in the change.
> Reported by: If someone else reported the issue.
> Reviewed by: If someone else reviewed your modification.
> Approved by: If you needed approval for this commit.
> Obtained from: If the change is from a third party.
> MFC after: N [day[s]|week[s]|month[s]]. Request a reminder email.
> MFH: Ports tree branch name. Request approval for merge.
> Relnotes: Set to 'yes' for mention in release notes.
> Security: Vulnerability reference (one per line) or description.
> Sponsored by: If the change was sponsored by an organization (each collaborator).
> Differential Revision: https://reviews.freebsd.org/D### (*full* phabric URL needed).
> Empty fields above will be automatically removed.
M sys/powerpc/aim/aim_machdep.c
M sys/powerpc/aim/trap_subr32.S
M sys/powerpc/aim/trap_subr64.S
M sys/powerpc/include/trap.h
Summary:
This makes the interface described in the definition file act like a
pseudo-IFUNC service, by caching the found method locally.
Applying this to the PowerPC MMU definitions, it yields a significant
(15-20%) performance improvement, seen in both a 'make buildworld' and a
parallel build of LLVM, on a POWER9 system.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D23245
Summary:
Consolidate the NUMA associativity handling into a platform function.
Non-NUMA platforms will just fall back to the default (0). Currently
only implemented for powernv, which uses a lookup table to map the
device tree associativity into a system NUMA domain.
Fixes hangs on powernv after r356534, and corrects a fairly longstanding
bug in powernv's NUMA handling, which ended up using domains 1 and 2 for
devices and memory on power9, while CPUs were bound to domains 0 and 1.
Reviewed by: bdragon, luporl
Differential Revision: https://reviews.freebsd.org/D23220
It turns out the maximum TLB1 page size on e5500 is 4G, despite the format
being defined for up to 1TB.
So, we need to clamp the DMAP TLB1 entries to not attempt to create 16G or
larger entries.
Fixes boot on my X5000 in which I just installed 16G of RAM.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23244
In r291668, an instruction was added to sigcode64.S without the nop pad at
the end being taken out.
Due to alignment, this means that a dword is being wasted on the shared
page for no reason.
Take out this nop, and add some comments while I'm here.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23055
This enables virtio modules on PowerPC* target.
On PowerPC64, drivers are also kernel builtin.
QEMU currently needs to be patched to in order to work on LE hosts due to known
issue affecting pre-1.0 (legacy) virtio drivers.
The patch was submitted to QEMU mail list by @afscoelho_gmail.com, available at
https://lists.nongnu.org/archive/html/qemu-devel/2020-01/msg01496.html
Submitted by: Alfredo Dal'Ava Junior <alfredo.junior@eldorado.org.br>
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D22833
r302340, as an attempt to fix the localbus child handling post-rman change,
actually broke child resource allocation, due to typos in
fdt_lbc_reg_decode(). This went unnoticed because there aren't any drivers
currently in tree that use localbus.
hw.floatingpoint and hw.altivec are effectively runtime constants (bits from
the cpu_feature bitfield), so don't need Giant, or any locking for that
matter.
It may be possible to make this completely lock free, but for now it's using
a statically allocated bounce buffer in the softc, so it needs to be
guarded.
This is a lock-based emulation of 64-bit atomics for kernel use, split off
from an earlier patch by jhibbits.
This is needed to unblock future improvements that reduce the need for
locking on 64-bit platforms by using atomic updates.
The implementation allows for future integration with userland atomic64,
but as that implies going through sysarch for every use, the current
status quo of userland doing its own locking may be for the best.
Submitted by: jhibbits (original patch), kevans (mips bits)
Reviewed by: jhibbits, jeff, kevans
Differential Revision: https://reviews.freebsd.org/D22976
In IRC, sfs_ finally managed to get a good trace of a kernel panic that was
happening when attempting to use webengine.
As it turns out, we were using vtophys() from interrupt context on an idle
thread in opal_hmi_handler2().
Since this involves locking the kernel pmap on PPC64 at the moment, this
ended up tripping a KASSERT in mtx_lock(), which then caused a parallel
panic stampede.
So, avoid this by preallocating the flags variable and storing it in PCPU.
Fixes "panic: mtx_lock() by idle thread 0x... on sleep mutex kernelpmap".
Differential Revision: https://reviews.freebsd.org/D22962
Due to a bug in clang 9.0.0 source tracking, the trap vector copying will
always trigger a fortify-source warning.
The destination buffers are 0x2f00 bytes, and the bcopy region is 0x2e00
bytes, so there is not an overflow here.
(I have been running with this patch since September.)
Summary:
r356113 used an older patch, which predated the
freebsd_copyout_auxargs() addition. Fix this by using a private
powerpc_copyout_auxargs() instead, and keep it private to powerpc, not in MI
files.
Reviewed by: kib, bdragon
Differential Revision: https://reviews.freebsd.org/D22935
This is a prerequisite for anything IFUNC in the ELFv2 / clang switch.
Since probing cpu info on powerpc is a privileged operation, define that we
pass AT_HWCAP / AT_HWCAP2 through as cpu_features and cpu_features2 to ifunc
resolvers.
This is particularly important when dealing with non-PLT GNU IFUNC, which is
not allowed to PLT call from resolvers and therefore can't access global
variables.
The naming convention "cpu_features"/"cpu_features2" is an existing FreeBSD
PowerPC convention and matches the way we treat these variables in
machine/cpu.h.
The underlying variables are u_long, however, as per the commit message for
r332868, only the low 32 bits are ever used, so the underlying flags are
compatible across all of PowerPC.
The resolver prototype is defined to reserve the maximum number of
register-passed parameters the various PowerPC ABIs allow. This leaves
plenty of room for growth without needing to resort to passing via the
stack in the future.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22787
Due to clang and LLD's tendency to use a PLT for builtins, and as they
don't have full support for EABI, we sometimes have to deal with a PLT in
.ko files in a clang-built kernel.
As such, augment the in-kernel linker to support jump table processing.
As there is no particular reason to support lazy binding in kernel modules,
only implement Secure-PLT immediate binding.
As part of these changes, add elf_cpu_parse_dynamic() to the MD API of the
in-kernel linker (except on platforms that use raw object files.)
The new function will allow MD code to act on MD tags in _DYNAMIC.
Use this new function in the PowerPC MD code to ensure BSS-PLT modules using
PLT will be rejected during insertion, and to poison the runtime resolver to
ensure we get a clear panic reason if a call is made to the resolver.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22608
off the stack, initialized to default values, and then filled in with
driver-specific values, all without having to worry about the numerous
other fields in the tag. The resulting template is then passed into
busdma and the normal opaque tag object created. See the man page for
details on how to initialize a template.
Templates do not support tag filters. Filters have been broken for many
years, and only existed for an ancient make/model of hardware that had a
quirky DMA engine. Instead of breaking the ABI/API and changing the
arugment signature of bus_dma_tag_create() to remove the filter arguments,
templates allow us to ignore them, and also significantly reduce the
complexity of creating and managing tags.
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D22906
As far as I can tell, these are an artifact of times when linker sets
couldn't be empty, otherwise the kernel build would fail due to unresolved
symbols. hselasky fixed this in r268138, and I've audited the kbd portions
to make sure nothing would blow up due to the empty linker set and
successfully compiled+ran a kernel with no keyboard support at all.
Kill them off now since they're no longer required.
MFC after: 1 week
fix an assert violation introduced in r355784. Without this spinlock_exit()
may see owepreempt and switch before reducing the spinlock count. amd64
had been optimized to do a single critical enter/exit regardless of the
number of spinlocks which avoided the problem and this optimization had
not been applied elsewhere.
Reported by: emaste
Suggested by: rlibby
Discussed with: jhb, rlibby
Tested by: manu (arm64)
On PowerPC, this is needed in order for the debugger to find out
the memory offset where the kernel image was loaded on the remote
target.
This fixes symbol resolution when remote debugging a PowerPC kernel.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D22767
