for a shared mapping and marking the entry for inheritance.
Other thread might execute vmspace_fork() in between (e.g. by fork(2)),
resulting in the mapping becoming private.
Noted and reviewed by: alc
MFC after: 1 week
be the same chip):
- The I/O port resource may not be available with these. However, given
that we actually only need this resource for some controllers that
require their firmware to be up- and downloaded (which excludes the
SAS1078{,DE}) just handle failure to allocate this resource gracefully
when possible. While at it, generally put non-fatal resource allocation
failures under bootverbose.
- SAS1078{,DE} use a different hard reset protocol.
- Add workarounds for the 36GB physical address limitation of scatter/
gather elements of these controllers.
Tested by: Slawa Olhovchenkov
PR: 149220 (remaining part)
on extended and extensible structs if_msghdrl and ifa_msghdrl. This
will allow us to extend both the msghdrl structs and eventually if_data
in the future without breaking the ABI.
Bump __FreeBSD_version to allow ports to more easily detect the new API.
Reviewed by: glebius, brooks
MFC after: 3 days
both 64bit and 32bit binaries, not for 64bit only.
The set of the flag is not neccessary there, because the only current
user of the cpu_set_user_tls() is create_thread(), which calls
cpu_set_upcall() before and cpu_set_upcall() itself sets PCB_FULL_IRET.
Change the function for consistency and preserve existing KPI for now.
MFC after: 1 week
Code should just use the devtoname() function to obtain the name of a
character device. Also add const keywords to pieces of code that need it
to build properly.
MFC after: 2 weeks
overridden at attach time.
Some 802.11n NICs may only have one physical antenna connected.
The radios will be very upset if you try enabling radios which aren't
connected to antennas.
This allows hints to override the TX and RX chainmask.
These hints are:
hint.ath.X.rx_chainmask
hint.ath.X.tx_chainmask
They can be set at either boot time or in kenv before the module is loaded.
This and the previous HAL commit were sponsored in late 2011 by Hobnob, Inc.
Sponsored by: Hobnob, Inc.
by capabilities.
Add an ar5416SetCapability() function, which contains logic to override
the chainmask and update the relevant stream.
This is designed to be called after the attach function, which presets
the TX/RX chainmask and stream.
TODO: check the chainmask against the hardware chainmask so non-existing
chains aren't enabled.
If an IPv6 packet has extension headers the kernel needs to deal with it
itself. For the rest it can set various CSUM_XXX flags and the driver
will act on them.
the kernel allocated a buffer but did not zero it as it was about
to be completely filled by a uiomove() from the user's buffer.
However, if the uiomove() failed, the old contents of the buffer
could be exposed especially if the file was being mmap'ed. The
fix was to always zero the buffer when it was allocated.
This change first attempts the uiomove() to the newly allocated
(and dirty) buffer and only zeros it if the uiomove() fails. The
effect is to eliminate the gratuitous zeroing of the buffer in
the usual case where the uiomove() successfully fills it.
Reviewed by: kib
Tested by: scottl
MFC after: 2 weeks (to 9 only)
Reading register $29 with RDHWR is becoming the de-facto standard to
implement TLS. According to linux-mips wiki, MIPS Technologies has
reserved hardware register $29 for ABI use. Furthermore current GCC
makes the following assumptions:
- RDHWR is natively available or otherwise emulated by the kernel
- Register $29 holds the TLS pointer
Submitted by: Robert Millan <rmh@debian.org>
with clang. Also fix a number of warnings uncovered when building with
clang around some implicit enum conversions.
Sponsored by: Intel
Approved by: scottl
A new jail(8) option "devfs_ruleset" defines the ruleset enforcement for
mounting devfs inside jails. A value of -1 disables mounting devfs in
jails, a value of zero means no restrictions. Nested jails can only
have mounting devfs disabled or inherit parent's enforcement as jails are
not allowed to view or manipulate devfs(8) rules.
Utilizes new functions introduced in r231265.
Reviewed by: jamie
MFC after: 1 month
Add support for updating the devfs mount (currently only changing the
ruleset number is supported).
Check mnt_optnew with vfs_filteropt(9).
This new option sets the specified ruleset number as the active ruleset
of the new devfs mount and applies all its rules at mount time. If the
specified ruleset doesn't exist, a new empty ruleset is created.
MFC after: 1 month
1. Fixed timeout specification for the msleep in mps_wait_command().
Added 30 second timeout for mps_wait_command() calls in mps_user.c.
2. Make sure we call mps_detach_user() from the kldunload path.
3. Raid Hotplug behavior change.
The driver now removes a volume when it goes to a failed state,
so we also need to add volume back to the OS when it goes to
opitimal/degraded/online from failed/missing.
Handle raid volume add and remove from the IR_Volume event.
4. Added some more debugging information.
5. Replace xpt_async(AC_LOST_DEVICE, path, NULL) with
mpssas_rescan_target().
This is to work around a panic in CAM that shows up when adding a
drive with a rescan and removing another device from the driver thread
with an AC_LOST_DEVICE async notification.
This problem was encountered in testing with the LSI sas2ircu utility,
which was used to create a RAID volume from physical disks. The driver
has to create the RAID volume target and remove the physical disk
targets, and triggered a panic in the process.
The CAM issue needs to be fully diagnosed and fixed, but this works
around the issue for now.
6. Fix some memory initialization issues in mps_free_command().
7. Resolve the "devq freeze forever" issue. This was caused by the
internal read capacity command issued in the non-head version of the
driver. When the command completed with an error, the driver wasn't
unfreezing thd device queue.
The version in head uses the CAM infrastructure for getting the read
capacity information, and therefore doesn't have the same issue.
8. Bump the version to 13.00.00.00-fbsd. (this is very close to LSI's
internal stable driver 13.00.00.00)
Submitted by: Kashyap Desai <Kashyap.Desai@lsi.com>
MFC after: 3 days
