Commit Graph

203 Commits

Author SHA1 Message Date
fjoe
6de6ef2c05 tulip_busdma_cleanup: pass correct vaddr (2nd arg) to bus_dmamem_free()
Found with:	Coverity Prevent(tm)
CID:		1998
2009-02-09 17:07:29 +00:00
jhb
5279835925 During attach on some de(4) adapters the driver sends out a test packet as
part of detecting the media.  Explicitly ensure that we don't send it to
bpf(4) as bpf(4) isn't setup yet.  This worked by accident before the bpf
interface stuff was reworked to avoid other races (bpf_peers_present, etc.)
but now it needs an explicit check to avoid a panic.

MFC after:	3 days
PR:		kern/120915
2008-04-05 17:24:44 +00:00
yongari
6a4de3c0ba The maxsegsz of a dma tag created in de(4) is TULIP_DATA_PER_DESC bytes.
In Rx path it allocates a new mbuf with m_getcl(9) so the length of
the mbuf is MCLBYTES which is greater than a segment size specified by
the dma tag. This segment size mismatch caused a voluntary panic.
Fix the panic by settting the mbuf length to TULIP_DATA_PER_DESC.

Reported by:	Arne H Juul <arnej AT yahoo-inc DOT com>
Tested by:	Arne H Juul <arnej AT yahoo-inc DOT com>
2007-06-07 00:28:47 +00:00
mjacob
d26133e731 Increase size of timer counter bitfield to accomodate the actual size of the
default timer value.

Discovered By: gcc 4.2

MFC after:	3 days
2007-05-20 16:43:35 +00:00
piso
6a2ffa86e5 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
glebius
c9a02b4657 - Consistently use if_printf() only in interface methods: if_start(),
if_watchdog, etc., or in functions used only in these methods.
  In all other functions in the driver use device_printf().
- Use __func__ instead of typing function name.

Submitted by:	Alex Lyashkov <umka sevcity.net>
2006-09-15 15:16:12 +00:00
jhb
0f921e0992 Remove various bits of conditional Alpha code and fixup a few comments. 2006-05-12 05:04:46 +00:00
imp
fa9ace593f Repo copy de driver to dev/de, and adjust. 2006-02-26 17:52:04 +00:00
jhb
fec7bec361 Use the copy of the card's MAC address saved in tulip_enaddr() in the softc
if we need a valid MAC address (for probing the media for example) before
ether_ifattach() has been called since IF_LLADDR() is NULL then.

Tested by:	tisco
2005-12-22 16:18:23 +00:00
jhb
549335d7e2 Use ETHER_ADDR_LEN rather than hardcoding 6. 2005-12-21 15:15:43 +00:00
ru
c1d43a60c3 Fix the type of "eaddr" to guarantee the required alignment.
Suggested by:	marcel
2005-12-01 21:18:04 +00:00
ru
472f9c4334 Byte copy IF_LLADDR() on stack to align it to be safe for typecasts.
Tested by:	jhb
2005-11-30 17:48:23 +00:00
jhb
26ea846ce9 Various fixes to make de(4) not panic after ru@'s IF_LLADDR() changes:
- Don't call tulip_addr_filter() to reset the RX address filter in
  tulip_reset() since that gets called before ether_ifattach().  Just
  call it in tulip_init_locked().
- Use be16dec() and le16dec() to parse MAC addresses when programming
  the RX filter.
- Let ether_ioctl() handle SIOCSIFMTU since we were doing the exact same
  thing with the added bonus that we leaked the driver lock if the MTU
  was > ETHERMTU in the homerolled version.  This part will be MFC'd.

Clue from:	wpaul (1)
Stolen from:	marcel (2 via patch for dc(4))
MFC after:	1 week
2005-11-21 21:50:07 +00:00
ru
f70f525b49 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
jhb
6ff3e30a2c - Use m_defrag() instead of homerolling our own variant
tulip_mbuf_compress().  If we fail to allocate a new mbuf to copy the
  data into, put the mbuf back in the driver's send queue so that we can
  retry it later rather than throwing the packet away.
- Use m_devget() instead of doing it inline ourselves in the
  TULIP_COPY_RXDATA case.  If we fail to allocate an mbuf to copy the data
  into, don't forget about the original mbuf cluster.  The old code would
  lose the pointer and leak the cluster in that case.  Now it doesn't lose
  it but always sticks the original rx buffer back into the receive ring
  after trying to copy the data out and send it up the stack.  Also, if we
  fail to allocate a new mbuf to copy the data into, log an input error.
  Also, don't combine the priming case with the received-a-packet case to
  make the code flow a bit clearer and easier to follow.
2005-08-26 14:27:38 +00:00
jhb
8c4b41258f - Remove non-bus-dma code.
- Remove form feed characters.
- Fixup style of function declarations.
- Assume that an mbuf cluster is big enough to hold an ethernet frame.
  (This should really be using m_defrag(), but this diff is just simple
  changes for now.)
2005-08-25 21:06:56 +00:00
jhb
008d94d650 Major rototill of this driver to add FreeBSD bus-dma support:
- Allocate arrays of metadata for the descriptors in the rx and tx rings
  and change the ring pointers to walk the metadata array rather than the
  actual descriptor rings.  Each metadata object contains a pointer to its
  descriptor, a pointer to any associated mbuf, and a pointer to the
  associated bus_dmamap_t in the bus_dma case.  The mbuf pointers replace
  the tulip_txq and tulip_rxq local ifqueue's in the softc.
- Add lots of KTR trace entries using a local KTR_TULIP level which
  defaults to 0, but can be changed to KTR_DEV at the top of the file
  when debugging.
- Rename tulip_init(), tulip_start(), tulip_ifinit(), and tulip_ifstart()
  to tulip_init_locked(), tulip_start_locked(), tulip_init(), and
  tulip_start(), respectively, to match the convention in other drivers.
- Add a TULIP_SP_MAC() macro to encode two bytes of the MAC address into
  the setup buffer and use that in place of lots of BYTE_ORDER #ifdef's.
  Also, remove an incorrect XXX comment I added earlier, the driver was
  correct (at least it does the same thing dc(4) does).  TULIP_SP_MAC
  was shamelessly copied from DC_SP_MAC() in dc(4).
- Remove the #ifdef'd NetBSD bus-dma code and replace it with FreeBSD
  bus-dma code that not only compiles but even works at runtime.
- Use callout_init_mtx() instead of just callout_init().
- Correct the various wrapper macros for bus_dmamap_sync() for the rx
  and tx buffers to only ask for the sync ops that they actually need.
- Tidy the #ifdef TULIP_COPY_RXDATA code by expanding an #ifdef a bit
  so it becomes easier to read at the expense of a couple of duplicated
  lines of code.  Also, use m_getcl() to get an mbuf cluster rather than
  MGETHDR() followed by MCLGET().
- Maintain the ring free (ri_free) count for the rx ring metadata since
  we no longer have tulip_rxq.ifq_len around to indicate how many mbuf's
  are currently in the rx ring.
- Add code to teardown bus_dma resources when attach fails and generally
  fixup attach to do a better job of cleaning up when it fails.  This
  gets us a good bit closer to possibly having a detach method someday
  and making this driver an unloadable module.
- Add some functions that can be called from ddb to dump the state of
  a descriptor ring and to dump the state of an individual descriptor.
- Various comment grammer and spelling fixes.

I have bus-dma turned on by default, but I've left the non-bus-dma code
around so that it can be turned off to aid in debugging should any problems
turn up later on.  I'll be removing the non-bus-dma code in a subsequent
commit.
2005-08-25 20:12:43 +00:00
jhb
3477a18ba6 - Use htole32() instead of using bswap32() conditional on #if BYTE_ORDER.
- Don't set IFF_ALLMULTI in our ifnet's if_flags if we end up allowing
  all multicast due to limits in the MAC receive filters in hardware.

Requested by:	rwatson (2)
2005-08-17 17:46:51 +00:00
jhb
cb9509b4ac Remove the unused TULIP_CSR_{READ,WRITE}BYTE macros. 2005-08-17 17:45:19 +00:00
jhb
1fa7c54965 Call tulip_start() rather than tulip_ifstart() from the interrupt handler
to avoid recursing on the driver lock.  Not sure why my test box didn't
catch this earlier.

MFC after:	3 days
2005-08-09 21:53:26 +00:00
rwatson
5d770a09e8 Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
rwatson
9918d13b80 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
jhb
d675d9c68f - Use callout_*() rather than timeout() to periodically poll the media.
- Add locking to protect the softc and mark this driver as MP safe.  There
  are still some edge cases with multiport cards that need more locking
  work.

MFC after:	1 week
Tested on:	alpha
2005-07-27 13:51:01 +00:00
jhb
a46419f0fc - Use the PCIR_BAR() macro rather than hardcoding rids.
- Use pci_enable_busmaster() rather than fiddling with the PCI command
  register directly.
2005-07-21 16:43:07 +00:00
jhb
85a0e8deb1 Don't set if_start to tulip_ifstart all over the place. It is already
set in tulip_attach() and its value is never changed, so all the extra sets
are redundant.  I'm guessing that at some point in time de(4) had an
alternate start routine, but that hasn't been true in recent history.
2005-07-21 16:42:21 +00:00
jhb
5825347531 Remove conditional code that has largely rotted that is also not on by
default:
- TULIP_NEED_FASTTIMEOUT - tulip_fasttimeout() wasn't called anywhere
- BIG_PACKET - only worked on i386 anyway
- TULIP_USE_SOFTINTR - doesn't compile and was never updated to handle
  new netisr registration
- non-FreeBSD code
2005-07-21 16:40:08 +00:00
jhb
3969c485d9 Use get_cyclecount() rather than hardcoding rdtsc and rpcc in asm for i386
and alpha, respectively.
2005-07-21 16:34:14 +00:00
jhb
7bca04440d Fix a typo and some whitespace nits. 2005-07-21 16:33:05 +00:00
brooks
567ba9b00a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
imp
ca4a8cf386 Return BUS_PROBE_DEFAULT instead of 0. 2005-02-24 21:32:56 +00:00
phk
394b6c09a1 Hide link up/down/media printfs behind bootverbose 2004-11-08 19:21:57 +00:00
jmg
ab5364e451 fix (for me) the problems where if_de gets really slow after time
(usually taking 20 seconds to transmit a packet).. no longer fall back
to only transmitting one packet (instead of the entire queue) after we
have processed the entire send queue...  I have no idea why we didn't
start seeing this problem ~6 years ago when this code was introduced...
2004-10-18 23:06:12 +00:00
rwatson
f57f7a3212 Since the if_de driver doesn't contain locking, mark it as
IFF_NEEDSGIANT so that ifp->if_start won't be called without Giant
when running debug.mpsafenet=1.
2004-08-13 22:48:05 +00:00
bms
e828b3b382 Apply the long-overdue hatchet of style(9) death to this file. 2004-07-09 02:19:07 +00:00
bms
e305581b9b style(9) pass on prototypes. 2004-07-05 22:27:26 +00:00
stefanf
9dea8aeba1 Consistently use __inline instead of __inline__ as the former is an empty macro
in <sys/cdefs.h> for compilers without support for inline.
2004-07-04 16:11:03 +00:00
mlaier
7bc770a254 Bring in the first chunk of altq driver modifications. This covers the
following drivers: bfe(4), em(4), fxp(4), lnc(4), tun(4), de(4) rl(4),
sis(4) and xl(4)

More patches are pending on: http://peoples.freebsd.org/~mlaier/ Please take
a look and tell me if "your" driver is missing, so I can fix this.

Tested-by:	many
No-objection:	-current, -net
2004-07-02 12:16:02 +00:00
naddy
03b06cd9a3 Replace handrolled CRC calculation with ether_crc32_[lb]e(). 2004-06-09 14:34:04 +00:00
phk
78e0acd9ea Add missing <sys/module.h> includes 2004-05-30 20:00:41 +00:00
njl
05a1f56fc9 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
mdodd
5c1fa8d5da Announce ethernet MAC addresss in ether_ifattach(). 2004-03-14 07:12:25 +00:00
mux
667b43899d Stop setting ifp->if_output to ether_output() since ether_ifattach()
does it for us already.
2004-03-11 14:04:59 +00:00
brooks
f1e94c6f29 Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
imp
fdead95125 Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 07:20:27 +00:00
ticso
12af6656a2 Fix alignment requirements of tulip_rombuf by further increasing
tulip_boardid size.
Add a comment to tulip_rombuf about this requirement.
I have had panics on alpha while probing a de card.
2003-06-13 22:34:03 +00:00
obrien
7d804031bd Use __FBSDID(). 2003-06-11 06:34:30 +00:00
phk
ed097ecfc2 Move some FALLTHROUGH comments so they work.
Fix indentation error.
Make boardid string long enough.
Remove unused variable.

Found by:       FlexeLint
2003-05-31 19:46:58 +00:00
mdodd
261178d14f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
mdodd
cda1ad1e06 - Use if_broadcastaddr from struct ifnet rather than relying on
extern 'etherbroadcastaddr'.
- Make 'etherbroadcastaddr' static.

Reviewed by:	 imp
2003-03-21 17:53:16 +00:00
imp
cf874b345d Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00