The name is taken from the u-boot env vars fdtfile or fdt_file. If the
name isn't fully-qualified a search is done in module_path locations.
The search order for a usable dtb in fdt_setup_fdtp() is now
- A dtb loaded with an explicit "load -t dtb" command.
- A dtb already loaded into memory somehow[*] and pointed to by fdt_to_load.
- A dtb in the memory pointed to by the u-boot env vars fdtaddr or fdt_addr.
- A file named by the u-boot env vars fdtfile or fdt_file.
- A static dtb compiled into the kernel.
* Presumably by some arch-specific command or code.
The ext4 developers tend to tag Ext4-specific flags as
"incompatible" even when such features are not relevant for
read-only support. This is a consequence of the process
though which this filesystem is implemented without design
and the fact that some new features are not extensible to
ext2/3.
Organize the features according to what we support and sort
them so that we can now read-only mount filesystems with
some features that may be found in newly formatted ext4 fs.
Submitted by: Zheng Liu
Reviewed by: pfg
MFC after: 5 days
arguments from type,filename to filename,type to be consistant with other
public file_whatever() functions, and change it to return a pointer to
the preloaded_file struct describing the file. Adjust existing callers.
The old code basically said it was going to use some particular blob
without knowing whether it could successfully do so, then it would invoke
the function to do that and return its status. If it failed, you were
done, even if other blobs might be available. Now the code attempts to use
some particular blob and if that succeeds it says so and returns success,
otherwise it moves on to try another potential blob.
One specific problem this solves is when u-boot sets an fdtaddr variable
to point to some memory address, then doesn't actually load a blob at
that address. Now the header check will fail, and the code will move
on to the fallback dtb compiled into the kernel (if any).
processor family to determine if the workaround for AMD Family 10h Erratum
383 should be enabled. To enable virtual machine migration among a
heterogeneous collection of physical machines, the hypervisor may have
been configured to report an older processor family with a reduced feature
set. Effectively, the reported processor family and its features are like
a "least common denominator" for the collection of machines.
Therefore, when the kernel is running in a virtual machine, instead of
relying upon the processor family, we now test for features that prove
that the underlying processor is not affected by the erratum. (The
features that we test for are unlikely to ever be emulated in software
on an affected physical processor.)
PR: 186061
Tested by: Simon Matter
Discussed with: jhb, neel
MFC after: 2 weeks
If a "loaderdev=<device>" env variable is set and the named device
exists, it is used. If the device doesn't exist, fall back to the
historic "probe" loop that prefers disk devices over network devices.
If the env var is not set, preserve the historic behavior of using the
first working disk device provided by u-boot, or a network device if no
functional disk device is found and a network device exists.
The old probe loop is reworked so that it checks all bootable devices
provided by u-boot rather than taking an early-out on the first device
found. This results in the cosmetic change of listing all potential boot
devices for the user, but the behavior of which device it chooses is the
same as it has always been.
Some modules do not align data at least to size of pointer, they uses a
smaller alignment, but our pointer should be aligned to its native
boundary, otherwise on some platforms, hardware alignment checking
will cause bus error.
items), so it is more obvious that we aren't going to indirect through
a NULL pointer.
PR: 144723
Submitted by: Garrett Cooper <yaneurabeya at gmail.com>
Obtained from: NetBSD r1.19
MFC after: 2 weeks
Modelled after the i386 zfsloader. However, with no
2nd stage zfsboot to search for a bootable dataset,
attempt a ZFS boot if there is more than one ZFS
dataset found during the disk probe.
sys/boot/userboot/zfs
- build the ZFS boot library
sys/boot/userboot/userboot/
conf.c
- Add the ZFS pool and filesystem tables
devicename.c
- correctly format ZFS devices
main.c
- increase the size of the libstand malloc pool
to account for the increased usage from ZFS buffers
- probe for a ZFS dataset, and if one is
found, attempt to boot from it.
usr.sbin/bhyveload/bhyveload.c
- allow multiple invocations of the '-d' option
to specify multiple disks e.g. a raidz set.
Up to 32 disks are supported.
Tested with various combinations of GPT, MBR, single
and multiple disks, RAID-Z, mirrors.
Reviewed by: neel
Discussed with: avg
Tested by: Michael Dexter and others
MFC after: 3 weeks
illumos/illumos-gate@6fb4854bed
This fixes the tst.resize1.d and tst.resize2.d DTrace tests, which have
been failing since r261122 since they were causing dtrace(1) to attempt to
allocate and use large amounts of memory, and get killed by the OOM killer
as a result.
MFC after: 1 month
upstream DTrace code. It indicates that the kernel memory allocator need not
attempt to satisfy non-blocking allocations in low-memory conditions. This
has no direct equivalent in the malloc(9) flags, so it is just defined to 0
for now.
source shows that board vendors seem to be about evenly split on this.
This commit is a trivial change to note that while the previous change
was supposed to be whitespace only, this functional change also crept in.
The added lines were:
/* Board vendors use both fdtaddr and fdt_addr names. Grrrr. */
if (s == NULL)
s = ub_env_get("fdt_addr");
Introduce CRT_HAS_128BIT, currently for all __LP64__ platforms.
Use it to enable the various functions for TI mode.
This makes sure the correct primitives are also built for sparc64.
bsd.sys.mk, where it really belongs. This also causes the flag to get
added when clang is *not* the default system compiler, but is still
used, e.g. by setting WITH_CLANG_IS_CC manually.
MFC after: 3 days
to use-after-free.
fdescfree proceeds to free file pointers once fd_refcnt reaches 0, but
kern_proc_{o,}filedesc_out only checked for hold count.
MFC after: 3 days
directives, since on sparc64 we must still GNU as, which does not
support those directives.
Note there are several programs and libraries in our tree, which are
always compiled with -g, even if DEBUG_FLAGS is not set by the user!
It is a small and lightweight Mail Transport Agent.
It accepts mails from locally installed Mail User Agents (MUA) and delivers the
mails either locally or to a remote destination. Remote delivery includes
several features like TLS/SSL support, SMTP authentication and NULLCLIENT.
Make dma conditional to new WITHOUT_DMA option and make it respect WITHOUT_MAIL
Reviewed by: peter
Discussed with: emaste, bz, peter
The vlapic.ops handler 'enable_x2apic_mode' is called when the vlapic mode
is switched to x2APIC. The VT-x implementation of this handler turns off the
APIC-access virtualization and enables the x2APIC virtualization in the VMCS.
The x2APIC virtualization is done by allowing guest read access to a subset
of MSRs in the x2APIC range. In non-root operation the processor will satisfy
an 'rdmsr' access to these MSRs by reading from the virtual APIC page instead.
The guest is also given write access to TPR, EOI and SELF_IPI MSRs which
get special treatment in non-root operation. This is documented in the
Intel SDM section titled "Virtualizing MSR-Based APIC Accesses".
Enforce that APIC-write and APIC-access VM-exits are handled only if
APIC-access virtualization is enabled. The one exception to this is
SELF_IPI virtualization which may result in an APIC-write VM-exit.
The temperature monitor device is enabled to sample the die temperature at
16hz. The temperature is published via sysctl. A callout routine at 10hz
monitors the temperature and throttles back the cpu if the temperature
goes over a user-settable throttle point (by default 10C less than the
critical high-point temperature for the chip). The hardware is supposed
to be able to deliver an interrupt when the temperature exceeds a settable
limit, but the interrupt never arrives so for now a callout does the job.
At attach time we read the maximum cpu frequency the chip is allowed to run
at and the cpu is set to run at that speed. It's reported at attach time.
A sysctl variable reports the current speed when queried.
New sysctl values:
dev.imx6_anatop.0.cpu_mhz: 984
dev.imx6_anatop.0.temperature: 37.9C
dev.imx6_anatop.0.throttle_temperature: 95.0C
Steven Lawrance did the initial heavy lifting on this, but I changed
enough stuff that I'm the one to blame if anything breaks.
Submitted by: Steven Lawrance <stl@koffein.net>
saving the pointer will overwrite bytes belongs to another memory block
unexpectly, to fix the problem, use (allocated address + sizeof(void *)) as
initial value, and slip to next aligned address, so maximum extra bytes is
sizeof(void *) + align - 1.
Tested by: Andre Albsmeier < mail at ma17 dot ata dot myota dot orgndre >
