NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
enabling the functions that save and restore MXCSR, since access to this
register requires SSE support.
Note that you may run into other issues with OpenMP on i386, since this
*not* yet supported upstream, and certainly not extensively tested.
PR: 236062, 236582
MFC after: 1 month
X-MFC-With: r344779
* Set MK_OPENMP to yes by default only on amd64, for now.
* Bump __FreeBSD_version to signal this addition.
* Ensure gcc's conflicting omp.h is not installed if MK_OPENMP is yes.
* Update OptionalObsoleteFiles.inc to cope with the conflicting omp.h.
* Regenerate src.conf(5) with new WITH/WITHOUT fragments.
Relnotes: yes
PR: 236062
MFC after: 1 month
X-MFC-With: r344779
These libraries don't compile on non-C++-11 capable compilers, e.g., g++ 4.2.1
and its corresponding implementation of the c++ library, i.e., libstdc++.
Blacklist compilation on all non-C++-11 capable compilers and give others the
option of opting out of building/installing gmock/gtest via MK_GOOGLETEST.
This option is controlled by MK_CXX and MK_TESTS, as ATF compilation is.
And build libdl unconditionally. All supported FreeBSD linkers accept
-F / --filter so there is no need to test for support.
Discussed with: kib
Sponsored by: The FreeBSD Foundation
I had disabled building of the aforementioned targets due to warnings breaking
tinderbox. This silences the warning and restores them to the build.
Reported by: jhibbits
Reviewed by: jhibbits
Approved by: re (gjb)
Some background: in the GSoC project, libbe/Makefile lived in lib/libbe. I
created projects/bectl branch, maintained the above for all of five
minutes before I misread Makefile.inc1 and decided that it couldn't possibly
build outside of cddl/, so I kicked the Makefile out into the cddl/ build
and all was good. The misreading was of the bit where .WAIT is added to
SUBDIR after lib, libexec but prior to building bin and cddl *only during
the install targets*, which is the critical part.
Fast forward- buildworld was still broken in my branch unbeknownst to me
because I didn't nuke my OBJDIR. Combing through Makefile.inc1 eventually
revealed the necessary magic to make sure that libbe's dependencies are
specified well enough, and it becomes clear what needs done to make a
non-cddl/ build work. This is an interesting prospect, because the build
split is kind of annoying to work with.
IGNORE_PRAGMA is added to avoid dropping WARNS by one more. This was
previously pulled in via cddl/Makefile.inc.
Rather then combining hardlink creation for the geom(8) binary with
shared library build, move libraries to src/lib/geom so they are
built and installed normally. Create a common Makefile.classes
which is included by both lib/geom/Makefile and sbin/geom/Makefile
so the symlink and libraries stay in sync.
The relocation of libraries allows libraries to be build for 32-bit
compat. This also reduces the number of non-standard builds in
the system.
This commit is not sufficent to run a 32-bit /sbin/geom on a 64-bit
system out of the box as it will look in the wrong place for libraries
unless GEOM_LIBRARY_PATH is set appropriatly in the environment.
Reviewed by: bdrewery
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15360
Aligns the build with the FreeBSD traditional approach to not build in
contrib/, and to track inter-dependencies between libraries.
With help from: bdrewery
Reviewed by: bdrewery, hselasky
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D15648
- add '-j' options to filter to enable converting native pmc
log format to json lines format to enable the use of scripts
and external tooling
% pmc filter -j pmc.log pmc.jsonl
- Record the tsc value in sampling interrupts as opposed to
recording nanotime when the sample is copied to a global log
in hardclock - potentially many milliseconds later.
- At initialize record the tsc_freq and the time of day to give
us an offset for translating the tsc values in callchain records
OpenCSD is an ARM CoreSight(tm) trace packets decoder.
- Connect libopencsd to the arm64 build.
- Install opencsd headers to /usr/include/opencsd/
Sponsored by: DARPA, AFRL
libregex is a regex(3) implementation intended to feature GNU extensions and
any other non-POSIX compliant extensions that are deemed worthy.
These extensions are separated out into a separate library for the sake of
not cluttering up libc further with them as well as not deteriorating the
speed (or lack thereof) of the libc implementation.
libregex is implemented as a build of the libc implementation with LIBREGEX
defined to distinguish this from a libc build. The reasons for
implementation like this are two-fold:
1.) Maintenance- This reduces the overhead induced by adding yet another
regex implementation to base.
2.) Ease of use- Flipping on GNU extensions will be as simple as linking
against libregex, and POSIX-compliant compilations can be guaranteed with a
REG_POSIX cflag that should be ignored by libc/regex and disables extensions
in libregex. It is also easier to keep REG_POSIX sane and POSIX pure when
implemented in this fashion.
Tests are added for future functionality, but left disconnected for the time
being while other testing is done.
Reviewed by: cem (previous version)
Differential Revision: https://reviews.freebsd.org/D12934
Previously it was enabled by WITH_/WITHOUT_TOOLCHAIN, but it is commonly
expected to be available and may have non-toolchain consumers. As it
is now taken from the BSD-licensed ELF Tool Chain project, just install
it unconditionally.
PR: 213665, 223725
Reviewed by: bdrewery
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8398
The idea behinds mocks is that we don't need to ifdef a lot of code in
tools itself but those defines are hidden in the casper library.
Right now the mocks are implemented as define/inlines functions.
There was a very long discussion how this should be implemented.
This approach has some advantages like we don't need to link to any additional
libraries. Unfortunately there are also some disadvantages for example it is
easy to get library out of sync between two versions of functions or that we
need extra define to compile program with casper support.
This isn't an ideal solution but it's good enough for now and should simplify
capsicumizing programs. This also doesn't close us any other ways to do those
mocks and this should evolve in time.
Discussed with: pjd, emaste, ed, rwatson, bapt, cem, bdrewery
Differential Revision: https://reviews.freebsd.org/D8753
library -- libpmcstat.
This includes PMC logging module, symbols lookup functions,
ELF parsing, process management, PMC attachment, etc.
This allows to reuse code while building new hwpmc(4)-based applications.
Also add pmcstat_symbol_search_by_name() function that allows to find
mapped IP range for a given function name.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12718
libc++experimental.a on arm (r318654) and mips (r318859) anymore, since
upstream fixed the static assertions which would occur.
Noticed by: George Abdelmalik <gabdelmalik@uniridge.com.au>
PR: 223119
MFC after: 3 days
Create libdl.so.1 as a filter for libc.so.7 which exports public dl*
functions. The functions are resolved from the rtld instead, the goal
of creating library is to avoid errors from the static linker due to
missed libdl. For static binaries, an empty .o is compiled into
libdl.a so that static binaries still get dl stubs from libc.a.
Right now lld cannot create filter objects, disable libdl on arm64
when binutils are not used.
Reviewed by: bdrewery, dim (previos version); emaste
Exp run: PR 220525, done by antoine
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D11504
This adds a separate library for supporting std::experimental features.
It is purposefully static, and must be explicitly linked into programs
using -lc++experimental.
PLEASE NOTE: there is NO WARRANTY as to any stability or continuing
existence of the features in the std::experimental parts of the C++
library!
Reviewed by: ed
Differential Revision: https://reviews.freebsd.org/D10840
Compiler-rt and LLVM's libunwind provide a suitable replacement for
libgcc.a, libgcc_eh.a, and libgcc_s.so.
Remove the now-unused LLVM_LIBUNWIND block from gnu/lib/libgcc.
PR: 213480 [exp-run]
Reviewed by: brooks, ed
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8189
Cases other than MK_* (e.g. ${MACHINE_CPUARCH} == "i386") have been left
as is.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8246
with no creative content. Include "lost" changes from git:
o Use /dev/efi instead of /dev/efidev
o Remove redundant NULL checks.
Submitted by: kib@, dim@, zbb@, emaste@
the same API as the GPL'd version of this library. It implements the common
Linux API for programatically manipulating UEFI environment varibales using
the UEFI Runtime Services the kernel provides. It replaces the old efi
library since it is programmed to a different interface, but retails the
CHAR16 to UTF-8 and vice versa conversion routines. The new name is to match
Linux program's expectations.
Differential Revision: https://reviews.freebsd.org/D8128
Reviewed by: kib@, wblock@, Ganael Laplanche
Capsicum helpers are a set of inline functions which goal is to reduce
duplicated patterns used to Capsicumize applications.
Reviewed by: cem, AllanJude, bapt, ed, emaste
Differential Revision: https://reviews.freebsd.org/D8013
I've used this in a handful of RSS test applications. It is just some
very simple functions to fetch the RSS configuration, query the per-bucket
CPU set, and mark sockets as local to an RSS bucket. It should be sufficient
for both thread-based and process-based workloads.
(Yes, I wrote a manpage.)
This is based on some early RSS API and wrapper API work I did whilst
I was at Netflix. Thanks to Netflix for the very original work that
spawned this; thanks to Peter Grehan for his feedback about RSS APIs
and thanks to Jack Vogel and Navdeep Parhar for the NIC-facing side of the
APIs. These fed into the simple userland API I wrote up here.
Reviewed by: gallatin
It also turns off dependencies (bsdinstall, bsdconfig, dpv, tzsetup).
Reviewed by: dteske
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7969
this library. Sticking to 'libifconfig' (and 'ifconfig_' as function prefix)
should reduce chances of namespace collisions, make it more clear what the
library does, and be more in line with existing libraries.
Submitted by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D7742
Reviewed by: cem, kp
libifc (pronounced lib-ifconfig) aims to be a light abstraction layer between
programs and the kernel APIs for managing the network configuration.
This should hopefully make programs easier to maintain, and reduce code
duplication.
Work will begin on making ifconfig(8) use this library in the near future.
This code is still evolving. The interface should not be considered stable until
it is announced as such.
Submitted By: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Reviewed By: kp
Differential Revision: https://reviews.freebsd.org/D7529
