The primary reason for this commit is to separate mechanical and nearly
mechanical code changes from an upcoming fix for unsafe teardown of
shared interrupt handlers that have only filters (see D15905).
The technical rationale is that SLIST is sufficient. The only operation
that gets worse performance -- O(n) instead of O(1) is a removal of a
handler, but it is not a critical operation and the list is expected to
be rather short.
Additionally, it is easier to reason about SLIST when considering the
concurrent lock-free access to the list from the interrupt context and
the interrupt thread.
CK_SLIST is used because the upcoming change depends on the memory order
provided by CK_SLIST insert and the fact that CL_SLIST remove does not
trash the linkage in a removed element.
While here, I also fixed a couple of whitespace issues, made code under
ifdef notyet compilable, added a lock assertion to ithread_update() and
made intr_event_execute_handlers() static as it had no external callers.
Reviewed by: cem (earlier version)
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D16016
o The correct value for _JB_SIGMASK is 27.
o The storage size for double-precision floating
point register is 8 bytes.
Submitted by: "James Clarke" <jrtc4@cam.ac.uk>
Reviewed by: markj@
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16344
line args. I had thought console would be NULL, but it's efi. Set it
to efi (as a clue) before we initialize the console, then test it to
see if it changed on the command line to do the automatic
override. This gets my serial console back.
zfsloader as a hard link. While newer ones do, the whole point of the
link was to transition to the new world order smoothly. A hard link is
less flexible, but it works and will result in fewer bumps. Adjust
UPDATING entry to match.
users. Without -R, pw(8) uses getpwnam(3), which will open master.passwd
for the root user or passwd for non-root users. With -R <path> pw(8) was
always opening <path>/master.passwd, which would fail for a non-root user,
then falsely claim the userid you're trying to show doesn't exist.
Now for a non-root user it opens <path>/passwd and zeroes out the 3 fields
that aren't available in the passwd file, which duplicates the behavior of
getpwnam(3). The net effect is that the showuser output is identical
whether using -R or not.
This change allows one to set the busy_detect flag
required by the synopsys UART at the loader prompt.
This is needed by the EPYC 3000 SoC.
This will give users a working console up to the point where getty is required:
hw.uart.console="mm:0xfedc9000,rs:2,bd:1"
Reviewed by: imp
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D16399
The change made in r336593 assumes that the build is happening in a
svn checkout resulting in misleading debug output. Check that we're
actually working in an svn checkout before proceeding to call svn.
Since r336313, TSO support for LEM-class devices is removed again as it
was before the conversion of {l,}em(4) to iflib(4) in r311849 and as a
result, isc_tx_tso_segments_max is 0 for LEM-class devices now. Thus,
inappropriate watermarks were used for this class.
This is really only a band-aid, though, because so far iflib(9) doesn't
fully take into account that DMA engines can support different maxima
of segments for transfers of TSO and non-TSO packets. For example, the
DESC_RECLAIMABLE macro is based on isc_tx_nsegments while MAX_TX_DESC
used isc_tx_tso_segments_max only. For most in-tree consumers that
doesn't make a difference as the maxima are the same for both kinds of
transfers (that is, apart from the fact that TSO may require up to 2
sentinel descriptors but also not with every MAC supported). However,
isc_tx_nsegments is 8 but isc_tx_tso_segments_max is 85 by default
with ixl(4).
tests for avail > 0, avail can never be 0 within that loop. Thus, move
decrementing avail and budget_left into the loop and before the code which
checks for additional descriptors having become available in case all the
previous ones have been processed but there still is budget left so the
latter code works as expected. [1]
- In iflib_{busdma_load_mbuf_sg,parse_header}(), remove dead stores to m
and n respectively. [2, 3]
- In collapse_pkthdr(), ensure that m_next isn't NULL before dereferencing
it. [4]
- Remove a duplicate assignment of segs in iflib_encap().
Reported by: Coverity
CID: 1356027 [1], 1356047 [2], 1368205 [3], 1356028 [4]
- Don't bother calling if_setbaudrate(9) as iflib_link_state_change(9)
takes care of that,
- correctly check for E1000_CTRL_EXT_LINK_MODE_GMII in E1000_CTRL_EXT [1],
- properly convert the uint16_t link_speed to a uint64_t baudrate by
using IF_Mbps() which contains an appropriate cast [2],
- remove the duplicate link down announcement when bootverbose isn't
zero and bring the remaining one in line with the other link state
messages.
o Remove a dead store to rid in em_if_msix_intr_assign(). [3]
o Or in the DMA coalescing Rx threshold so the other bits set in E1000_DMACR
remain intact as intended in igb_init_dmac(). [4]
Reported by: Coverity
CID: 1378464 [1], 1368765 [2], 1381681 [3], 1304929 [4]
Some of the changes are in the libexec/tftpd directory, but to functions that
are only used by tftp(1) (they share some code).
* strcpy => strlcpy (1006793, 1006794, 1006796, 1006741)
* Unchecked return value and TOCTTOU (1009314)
* NULL pointer dereference (1018035, 1018036)
Reported by: Coverity
CID: 1006793, 1006794, 1006796, 1006741, 1009314, 1018035
CID: 1018036
MFC after: 2 weeks
These syscalls were always supposed to have been auditted, but due to
oversights never were.
PR: 228374
Reported by: aniketp
Reviewed by: aniketp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16388
Now that multiple providers can be attached at once, exit codes and
error messages must be handled correctly if there are failures in on
any of the providers.
Reported by: asomers (Kyua test failures via continuous integration)
Reviewed by: asomers
Approved by: allanjude
Differential Revision: https://reviews.freebsd.org/D16386
This is needed with new u-boot that uses the rpi-firmware dtbs.
Reviewed by: gjb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D16240
This reduce the per-board arm_install_uboot to just install u-boot.
While here remove the installation of rpi.dtb and rpi2.dtb as we load
them from the UFS partition via ubldr.
Reviewed by: gjb, imp (older version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D16239
Ensure that the TCP connections are terminated gracefully as expected
by the test. Use appropriate numbers for sent/received packets.
In addition, enable tst.localtcpstate.ksh, which should pass, but
doesn't until https://reviews.freebsd.org/D16369 is committed.
Reviewed by: markj@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16288
When ABE was added (rS331214) to NewReno and leak fixed (rS333699) , it now has
a destructor (newreno_cb_destroy) for per connection state. Other congestion
controls may allocate and free cc_data on entry and exit, but the field is
never explicitly NULLed if moving back to NewReno which only internally
allocates stateful data (no entry contstructor) resulting in a situation where
newreno_cb_destory might be called on a junk pointer.
- NULL out cc_data in the framework after calling {cc}_cb_destroy
- free(9) checks for NULL so there is no need to perform not NULL checks
before calling free.
- Improve a comment about NewReno in tcp_ccalgounload
This is the result of a debugging session from Jason Wolfe, Jason Eggleston,
and mmacy@ and very helpful insight from lstewart@.
Submitted by: Kevin Bowling
Reviewed by: lstewart
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16282
This code was originally written for NetBSD. r306031 tried to adapt it to
FreeBSD, but didn't correctly handle the case that tmpfs was available, but
not already loaded. Fix the logic to load the module if necessary. The
tmpfs tests shouldn't be skipped anymore.
Also, fix a comment that was dislocated by r306031.
Reported by: Jenkins
MFC after: 2 weeks
and revision number announced in SNS notifications about new EC2 AMIs.
While I'm here, incorporate that information into the AMI "description"
fields, since it's more useful than simply echoing the information
already provided via the AMI "name".
Approved by: gjb
We've got a set of probably damaged hard disks, reporting 0x04,0x02
("Logical unit not ready, initializing command required") in response
to READ CAPACITY(16), where attempts to use START STOP UNIT for recovery
results in 0x44,0x00 ("Internal target failure") after ~1 second delay.
As result of all recovery retries, device open attempt took ~3 seconds
before finally reporting to GEOM that device is opened, but has no media.
If the open was for writing and since it hasn't formally failed, following
close triggered GEOM retaste, opening device few more times with respective
delays.
This change reduces whole time of this cycle from ~12 seconds to ~3 by
giving up on recovery after the first failure.
Reviewed by: ken
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
In r321967 ngie "fixed" these tests by changing their expectations to match
the device numbers produced by the new ino64 code. But it wasn't the tests
that were broken, it was the kernel. bde fixed the kernel in r335053.
Reported by: Jenkins
MFC after: Never (only applies to >= 12)
