Commit Graph

448 Commits

Author SHA1 Message Date
Marius Strobl
dcaf1a3834 - As only the PCI front-end of le(4) is common to all platforms move its
entry to the PCI NICs section so it's in the same spot in all GENERIC
  config files.
- Add a note to the description of pcn(4) informing that is has precedence
  over le(4).
2006-05-17 20:44:01 +00:00
Poul-Henning Kamp
f6ce2a64f7 Send the pcvt(4) driver off to retirement. 2006-05-17 09:33:15 +00:00
Ruslan Ermilov
155d9f6a98 Kill more references to lnc(4).
Submitted by:	grep(1)
2006-05-16 12:15:39 +00:00
George V. Neville-Neil
3f0c418ad9 Prefer the le device driver for Lance (AMD7990 et al) hardware over the
older, and less capable lnc driver.

Reviewed by:	imp
2006-05-14 01:40:41 +00:00
Sam Leffler
8e84cc6b22 add ath and wlan crypto support
Requested by:	many
MFC after:	1 month
2006-05-03 18:13:11 +00:00
Scott Long
bd02c63f13 Add the rr232x driver to the default kernels. 2006-04-27 20:58:24 +00:00
Xin LI
3b28c0c6f9 Move AHC_REG_PRETTY_PRINT and AHD_REG_PRETTY_PRINT below
their corresponding devices.
2006-04-24 08:44:34 +00:00
Paul Saab
d8636a9ab7 Hook bce up to the build 2006-04-10 20:04:22 +00:00
Maksim Yevmenkin
9216fccdd9 Add kbdmux(4) to GENERIC
Requested by:	scottl
2006-03-31 19:03:37 +00:00
Scott Long
7f631a410c Hook the MFI driver up to the build. 2006-03-29 09:57:22 +00:00
Marius Strobl
a5f92d5a54 Remove the commented out entry of the old ISA-only le(4) driver which
was retired 22 months ago.

MFC after:	1 day
2006-01-21 12:38:35 +00:00
Poul-Henning Kamp
d3e64681d6 Move the old BSD4.3 tty compatibility from (!BURN_BRIDGES && COMPAT_43)
to COMPAT_43TTY.

Add COMPAT_43TTY to NOTES and */conf/GENERIC

Compile tty_compat.c only under the new option.

Spit out
	#warning "Old BSD tty API used, please upgrade."
if ioctl_compat.h gets #included from userland.
2006-01-10 09:19:10 +00:00
Ruslan Ermilov
6646524f34 - Allow duplicate "machine" directives with the same arguments.
- Move existing "machine" directives to DEFAULTS.
2005-11-27 23:17:00 +00:00
Marcel Moolenaar
38195fdcaf Add uart(4). When both sio(4) and uart(4) can handle a serial port,
sio(4) will claim it. This change therefore only affects how ports
are handled when they are not claimed by sio(4), and in principle
will improve hardware support.

MFC after: 2 months
2005-11-05 19:48:53 +00:00
John Baldwin
d394d454b0 Throw the switch and turn on STOP_NMI on in GENERIC for amd64 and i386.
Requested by:	kris
Ok'd by:	scottl
2005-11-01 22:59:03 +00:00
John Baldwin
85d72e4a2e Create a default kernel config for i386 and move 'device isa' and
'device npx' (both of which aren't really optional right now) and
'device io' and 'device mem' (to preserve POLA for 4.x users upgrading
to 6.0) from GENERIC into DEFAULTS.

Requested by:	scottl
Reviewed by:	scottl
2005-10-27 17:34:35 +00:00
David Xu
db12d03ed9 Revert last change, I will turn ULE on as default after 6.0-R.
Noticed by: scottl
2005-08-06 23:05:48 +00:00
David Xu
dd34f92b7f Make ULE as default scheduler, allow it to be tested more widely. 2005-08-06 10:31:27 +00:00
Ken Smith
22e59cec3b Add recently invented COMPAT_FREEBSD5 option.
MFC after:	3 days
2005-07-14 15:39:06 +00:00
Damien Bergamini
0b090f4153 Add new ral(4) and ural(4) drivers.
Approved by:	silby (mentor)
2005-05-24 16:48:07 +00:00
Scott Long
d0885ac3cf Glue the arcmsr driver into the tree. 2005-03-31 20:21:43 +00:00
Maxim Sobolev
6bcf003260 Add USB Communication Device Class Ethernet driver. Originally written for
FreeBSD based on aue(4) it was picked by OpenBSD, then from OpenBSD ported
to NetBSD and finally NetBSD version merged with original one goes into
FreeBSD.

Obtained from:  http://www.gank.org/freebsd/cdce/
                NetBSD
                OpenBSD
2005-03-22 14:52:40 +00:00
Murray Stokely
991f5121f0 Add a comment to note that pseudo-device bpf is required for DHCP.
This is mentioned in the Handbook but it is not as obvious to new
users why bpf is needed compared to the other largely self-explanatory
items in GENERIC.

PR:		conf/40855
MFC after:	1 week
2005-03-18 15:24:00 +00:00
David E. O'Brien
bf6fabdd60 Make it clear nve needs mii, and shorten long comment line. 2005-03-16 20:23:31 +00:00
Ian Dowse
7fe25a5726 Enable ehci by default on i386 and amd64. It had got to the stage
where having this disabled was actually hurting us, since so many
BIOSes include legacy USB emulation that takes control of all usb
ports and only the ehci driver knows how to disable it.
2005-03-16 02:34:50 +00:00
David E. O'Brien
1b1a07ad8b FreeBSD consumer bits of the nForce MCP NIC binary blob.
Demanded by:	DES
Encouraged by:	scottl
Obtained from:	q@onthenet.com.au (partially)
KNF'ed by:	obrien
2005-03-12 00:29:30 +00:00
Jun Kuriyama
6f4e528a8e o Use tab instead of spaces for puc(4) line.
o Use capitalized "Ethernet" for consistency.
2005-01-05 05:25:21 +00:00
John Baldwin
7174b63b19 - Indent the comments beside the SMP options to the same level as all the
other comments.  Clarify that the next two things needed for SMP are
  two lines.
- Expand mii abbreviation to miibus for clarity in the USB ethernet
  comment.
2004-12-30 15:30:23 +00:00
Andre Oppermann
32672ba88d Reduce annoying SCSI probing delay from 15 to 5 seconds in all GENRIC kernels.
Discussed on:	-current
2004-11-02 20:57:20 +00:00
Scott Long
085f35d6f3 Hook the hptmv driver up to the build. 2004-10-24 08:53:40 +00:00
Matt Jacob
b3940a8730 Put in a commented out ispfw device under isp and note that this is usually
a module.
2004-09-19 00:52:22 +00:00
Bill Paul
a07bd003bf Add device driver support for the VIA Networking Technologies
VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY.
The vge driver has been added to GENERIC for i386, pc98 and amd64,
but not to sparc or ia64 since I don't have the ability to test
it there. The vge(4) driver supports VLANs, checksum offload and
jumbo frames.

Also added the lge(4) and nge(4) drivers to GENERIC for i386 and
pc98 since I was in the neighborhood. There's no reason to leave them
out anymore.
2004-09-10 20:57:46 +00:00
Scott Long
4ef90982ca Fix a cut-n-paste glitch with SCHED_4BSD. 2004-09-07 22:44:55 +00:00
Scott Long
444ba94513 Switch the default scheduler to 4BSD to match what will go into RELENG_5 soon.
It can be switched back once 5.3 is tested and released.  Also turn on
PREEMPTION as many of the stability problems with it have been fixed.

MT5: 3 days.
2004-09-07 22:37:43 +00:00
Andre Oppermann
c21fd23260 Always compile PFIL_HOOKS into the kernel and remove the associated kernel
compile option.  All FreeBSD packet filters now use the PFIL_HOOKS API and
thus it becomes a standard part of the network stack.

If no hooks are connected the entire packet filter hooks section and related
activities are jumped over.  This removes any performance impact if no hooks
are active.

Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
2004-08-27 15:16:24 +00:00
Robert Watson
b505f47bef Add ADAPTIVE_GIANT to GENERIC on i386, with the intent of making it
a standard configuration similar to [NO_]ADAPTIVE_MUTEXES.  This
feature causes Giant to be included in the set of mutexes adaptively
spun on.  It appears to have a positive effect on performance on SMP
across several workloads, including measurements of a 16% improvement
on buildworld, and 30%+ improvement for MySQL using the supersmack
benchmark with Giant over the network stack; a 6% improvement without
Giant on the network stack (as a result of less giant contention).
2004-08-11 01:34:18 +00:00
Warner Losh
e0eb3c19a7 Remove commented out pcic driver. It is too broken to work (even if you
fix the obvious bugs, nastier ones reside below the surfac), and having
it commented out here just encourages people to try it.

# I'm not removing it from the base system, yet.
2004-08-09 17:36:19 +00:00
Mark Murray
d23a262fc5 Making a loadable null.ko for /dev/(null|zero) proved rather
unpopular, so remove this (mis)feature.

Encouragement provided by:	jhb (and others)
2004-08-03 19:24:54 +00:00
Mark Murray
b6527a3667 Add the I/O device for those architectures that have it. 2004-08-01 19:37:34 +00:00
Mark Murray
e54788c73d Remove local hack that was not supposed to be committed.
Spotted by:	Antoine Brodin - antoine dot brodin at laposte dot net
2004-08-01 18:12:25 +00:00
Mark Murray
8ab2f5ecc5 Break out the MI part of the /dev/[k]mem and /dev/io drivers into
their own directory and module, leaving the MD parts in the MD
area (the MD parts _are_ part of the modules). /dev/mem and /dev/io
are now loadable modules, thus taking us one step further towards
a kernel created entirely out of modules. Of course, there is nothing
preventing the kernel from having these statically compiled.
2004-08-01 11:40:54 +00:00
Maxim Konovalov
aa355a2679 In -CURRENT pseudo devices are not statically assigned at compile time,
remove a stale comment.

PR:		kern/62285
2004-07-18 09:03:12 +00:00
Marcel Moolenaar
8bcb1e9e84 Add options KDB and GDB. KDB takes on the function of what DDB used
to be. Both DDB and GDB specify which KDB backends to include.
2004-07-11 03:20:09 +00:00
Tony Ackerman
e03f8cdc4f First release of ixgb driver for the Intel(R) PRO/10GbE Family of Adapters. This driver has
been developed for use with FreeBSD, version 4.8 and later.

Submitted by:	Hema Joyce
Reviewed by: 	Prafulla Deuskar
Approved by: 	Prafulla Deuskar
MFC after:	1 week
2004-05-28 00:23:00 +00:00
Marcel Moolenaar
d1d9feac7c Add option GEOM_GPT. This brings the ability to have a large number of
partitions on a single disk.
2004-05-02 20:40:19 +00:00
David E. O'Brien
4e744b5e7f Spell Ethernet correctly. 2004-05-02 18:57:29 +00:00
Maxim Sobolev
e99eef3d4f Add rue(4) USB ethernet driver, which for some reason has been missed. 2004-04-26 22:52:09 +00:00
Warner Losh
22391e1540 Remove npx(4) reference for isa. While true, it is useless (since
there are a lot of other dependencies that preclude the kernel from
working).  Instead, have a more generic note that isa should not be
removed.  This should be less confusing for users.
2004-04-22 15:17:39 +00:00
Josef El-Rayes
2e30742814 Add note that npx depends on isa.
Approved by:	green
2004-04-15 15:11:04 +00:00
Vinod Kashyap
99635d6cdd Initial check-in of the device driver for 3ware's 9000 series
PATA/SATA RAID controllers.  This driver is a SIM under CAM, and
so, behaves like a driver for a SCSI controller.
2004-03-30 03:46:00 +00:00