When drawing cursor, we should store original display
content because there may be image data we would like to restore
when the cursor is removed.
PR: 254054
Reported by: Jose Luis Duran
MFC after: 3 days
Calculate font size from 16 density independent pixels (dp) by using:
size = 16 * ppi/160 * display_factor
We are specifying font size 16dp, and assuming 1dp = 160ppi.
Also apply scaling factor 2 (display_factor).
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28849
The VT screen buffer size is calculated based on our default
built in (8x16) font.
With high-resolution display, we want to use at least 8x16 font,
or we will have large unused areas on screen.
MFC after: 1 week
BORDER_PIXELS is left over from picking up the source from illumos
port. Since FreeBSD VT does not use border in terminal size
calculation, there is no reason why should loader use it.
MFC after: 1 week
While loading kernel, we check if vt/vbe backend support is included in
kernel and set the tg_kernel_supported flag in gfx_state. unload
command needs to reset this flag to allow next load to perform
this check with new kernel.
Reported by: jhb
On i386, after 6c7a932d0b, the vbefb vt
driver was no longer detected by the loader, if any kernel module was
loaded after the kernel itself.
This was caused by the parse_vt_drv_set() function being called multiple
times, resetting the detection flag. (It was called multiple times,
becuase i386 .ko files are shared objects like the kernel proper, while
this is not the case on amd64.)
Fix this by skipping the set_vt_drv_set lookup if vbefb was already
detected.
Reviewed by: tsoome
There is no need to keep multiple copies of the relocation code. The
amd64 code works on arm64 with a few small changes to relocation types.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28213
Draw console on efi.
Add vbe framebuffer for BIOS loader (vbe off, vbe on, vbe list,
vbe set xxx).
autoload font (/boot/fonts) based on resolution and font size.
Add command loadfont (set font by file) and
variable screen.font (set font by size). Pass loaded font to kernel.
Export variables:
screen.height
screen.width
screen.depth
Add gfx primitives to draw the screen and put png image on the screen.
Rework menu draw to iterate list of consoles to enamble device specific
output.
Probably something else I forgot...
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27420
For the first second otime and ntime are equal so no message gets
printed. Instead we should print the countdown right from the start,
although we do it at the end of the first iteration so that if a key has
already been pressed then the message is suppressed.
Reviewed by: imp
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D26935
This is nearly a 1:1 mapping of the pager API from libsa. The only real
difference is that pager.output() will accept any number of arguments and
coerce all of them to strings for output using luaL_tolstring (i.e. the
__tostring metamethod will be used).
The only consumer planned at this time is the upcoming "show-module-options"
implementation.
MFC after: 1 week
Extend the powerpc relative relocation handling from r240782 to a
handful of other architectures. This is needed to properly read
dependency information from kernel modules.
Reviewed by: jhb
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26365
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
Move hexdump from stand/common/misc.c to stand/libsa/hexdump.c
(svn cp)
Disable use of pager - causes linking issue for boot1
can be re-enabled by defining HEXDUMP_PAGER.
Reviewed by: stevek, imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D26235
When building on macOS with sh==zsh, newvers.sh was producing an
unterminated string literal due to \\n being turned as a newline. Fix this
by using a here document instead.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D26036
Fix typo in interp_include() invocation (missing 'p')
Remove setting tftpip, as servip is used by the tftp code in libsa. There
is no separate tftpip global variable any more.
Obtained from: Juniper Networks, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25897
This implementation doesn't have any major deviations from the other EFI
ports. I've copied the boilerplate from arm and arm64.
I've tested this with the following boot flows:
OpenSBI (M-mode) -> u-boot (S-mode) -> loader.efi -> FreeBSD
OpenSBI (M-mode) -> u-boot (S-mode) -> boot1.efi -> loader.efi -> FreeBSD
Due to the way that u-boot handles secondary CPUs, OpenSBI >= v0.7 is required,
as the HSM extension is needed to bring them up explicitly. Because of this,
using BBL as the SBI implementation will not be possible. Additionally, there
are a few recent u-boot changes that are required as well, all of which will be
present in the upcoming v2020.07 release.
Looks good: emaste
Differential Revision: https://reviews.freebsd.org/D25135
These are picked out by the amd64-gcc6 build; time() is declared in <time.h>
and delay() is declared in <bootstrap.h>. These are the correct places for
these in stand/, so remove the duplicate declarations and make sure the
delay() consumer in libefi that depended on the extra delay() declaration
includes <bootstrap.h>.
MFC after: 1 week
Having libzfs.h wrapped in LOADER_ZFS_SUPPORT check does not really make sense,
because we do need function declarations with C99.
Sponsored by: Netflix, Klara Inc.
Rework to simplify and impose sane url syntax.
That is we allow for file://[devname[:fstype]]/package
Reviewed by: stevek
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D25134
The filename is nearly always wrong since it's /boot/lua/loader.lua, which
is not useful for diagnostics. The actual errmsg will include a lua filename
if this is relevant.
Dropping "LUA" while we're here because that's almost universally
irrelevant to whatever error follows, unless the error states that it's
actually a lua problem.
Both of these are minor nits that just detract from identifying the
pertinent information.
MFC after: 3 days
Some time after r338418, I believe with -Os/-Oz -ffunction-sections
-fdata-sections, the bootprog_interp variable that held our "$Interpreter:"
marker started getting strip from all loaders, with exception to userboot
since it used bootprog_interp to determine what flavor of userboot it was.
At some point, it had been brought to my attention that this was no longer
working and I had worked up some potential solutions to use the variable
that involved printing it out. My vague recollection is that this was
rejected, and I forgot to explore the alternatives; I cannot find records of
this discussion anymore.
Fast forward to present day, Andrew reported that it was non-functional and
offered (effectively) this patch (sans comment) to stop the compiler from
optimizing it out by assigning it to a volatile variable. This removes
concerns about user-facing change while retaining the interpreter marker.
Furthermore, it could certainly be uglier.
Reported and tested by: Andrew Gierth <andrew_tao173.riddles.org.uk>
MFC after: 3 days
We need a valid st_dev, st_ino and st_mtime
to correctly track which files have been verified
and to update our notion of time.
ve_utc_set(): ignore utc if it would jump our current time
by more than VE_UTC_MAX_JUMP (20 years).
Allow testing of install command via userboot.
Need to fix its stat implementation too.
bhyveload also needs stat fixed - due to change to userboot.h
Call ve_error_get() from vectx_close() when hash is wrong.
Track the names of files we have hashed into pcr
For the purposes of measured boot, it is important
to be able to reproduce the hash reflected in
loader.ve.pcr
so loader.ve.hashed provides a list of names in the order they
were added.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D24027
we have crc32(const void *, size_t) in libsa. Unfortunately zlib has
crc32(long, const unigned char *, unsigned) and we have conflict.
Since we do build libsa with zlib, we can use zlib version instead.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D24068
armv7 crash due to misligned access of dos_partition dp_start field.
Allocate and make copy of dos_partition array to make sure the data
is aligned.
Reported by: marklmi at yahoo.com
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
If we hit an error at this level, we are almost certainly not in any kind
of sane state where autoboot can do the right thing. Instead of letting it
try and probably failing, disable autoboot so they immediately get kicked
into a loader prompt for manual remediation/diagnosis.
Reviewed by: tsoome
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D23611
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
Multiple places coordinate to 'know' where lua scripts are installed. Knock
this down to being formally defined (and overridable) in exactly one spot,
defs.mk, and spread the knowledge to loaders and liblua alike. A future
commit will expose this to lua as loader.lua_path, so it can build absolute
paths to lua scripts as needed.
MFC after: 1 week
Summary:
There is logic in ELF loadimage() to relocate kernels, but currently
only type ET_EXEC. PowerPC kernels are ET_DYN, and can be relocated anywhere.
Add the load offset to kernel entry points on this platform.
Reviewed by: imp, ian
Differential Revision: https://reviews.freebsd.org/D21286
