Commit Graph

166476 Commits

Author SHA1 Message Date
olli
bdb9df6d85 jh pointed out that src/usr.sbin already has a global
WARNS=6 setting in HEAD (unlike stable/8), so it's best
to remove the line entirely.

Pointed out by:	jh
Approved by:	des (mentor)
2010-08-07 20:46:30 +00:00
ivoras
252207bbfb To help with sequential read UFS performance on modern systems, increase
the vfs.read_max default. For most systems this means going from 128 KiB
to 256 KiB, which is still very conservative and lower than what most
other operating systems use, but as a sane default should not
interfere much with existing systems.

For systems with RAID volumes and/or virtualization envirnments, where
read performance is very important, increasing this sysctl tunable to 32
or even more will demonstratively yield additional performance benefits.

If MAXPHYS ever gets bumped up, it will probably be a good idea to slave
read_max to it.
2010-08-07 18:30:10 +00:00
tuexen
542f657a7f Fix a bug where MSG_TRUNC was not returned in all necessary cases for
SOCK_DGRAM socket. MSG_TRUNC was only returned when some mbufs could
not be copied to the application. If some data was left in the last
mbuf, it was correctly discarded, but MSG_TRUNC was not set.

Reviewed by: bz
MFC after: 3 weeks
2010-08-07 17:57:58 +00:00
gavin
6962657fca Add a keymap for the Swiss-German Macbook keyboard.
PR:		conf/139997
Submitted by:	Andreas Tobler <andreast fgznet.ch>
MFC after:	2 weeks
Committed from:	Bugathon #7
2010-08-07 17:02:36 +00:00
olli
df9856d691 syslogd(8) already supports *sending* log messages to non-
standard ports, but it can't *receive* them (port 514 is
hardcoded).  This commit adds that missing feature.

(NB:  I actually needed this feature for a server farm where
multiple jails run with shared IP addresses, and every jail
should have its own syslogd process.)

As a side effect, syslogd now compiles with WARNS=6.

Approved by:	des (mentor)
MFC after:	3 weeks
2010-08-07 16:20:12 +00:00
gavin
14181a6158 Sync the list of devices supported by uslcom(4) with NetBSD, Linux, OpenBSD
and BeOS.  The devices supported by uslcom(4) are now in sync with:

NetBSD  src/sys/dev/usb/uslsa.c 1.11
OpenBSD src/sys/dev/usb/uslcom.c 1.20
Linux   source/drivers/usb/serial/cp210x.c from kernel 2.6.35
BeOS    usb_serial/driver.c 1.32

Two vendor/product IDs from Linux have not been added to uslcom(4):
  SILABS SAEL - This device has special code in u3g to support it
  SILABS GSM2228 - I suspect this should also be covered by u3g(4).

MFC after:	1 week
2010-08-07 16:14:40 +00:00
gavin
ca78f6e790 Sort this file a little better: the vendors are supposed to be sorted by
vendor ID in the vendor section, and by symbolic name in the product
section.  Products are sorted by product ID.  While here, get rid of a
duplicate Microsoft Mouse entry, revealed by sorting.

MFC after:	1 week
2010-08-07 16:08:37 +00:00
des
fba9d4fdfa Document the MEXTADD macro.
MFC after:	2 weeks
2010-08-07 13:26:08 +00:00
kib
8e1e89f01b Prefer struct sysentvec sv_psstrings to hardcoding FREEBSD32_PS_STRINGS
in the compat32 code. Use sv_usrstack instead of FREEBSD32_USRSTACK as well.

MFC after:	1 week
2010-08-07 11:57:13 +00:00
kib
8043767b92 Add compat32 definition for (old) struct ostat.
MFC after:	1 week
2010-08-07 11:53:38 +00:00
yar
4f9ce0e3a7 Clean up the style and markup of the paragraph on fractional wait intervals.
MFC after:	3 days
2010-08-07 11:48:31 +00:00
yar
afc5ef29db Properly spell and mark up the name of kern.hz.
MFC after:	3 days
2010-08-07 11:32:17 +00:00
yar
0b9e6a5c97 Move the sentences telling the defaults for -c and -w
to where they belong.  Previously they were misplaced,
i.e., swapped.

MFC after:	3 days
2010-08-07 11:13:50 +00:00
pjd
481dcd416a In FreeBSD we use 'jailed' property.
MFC after:	2 weeks
2010-08-07 10:23:54 +00:00
joel
38858fc544 Fix typo in comment. 2010-08-07 08:31:32 +00:00
rwatson
0c4bafa8fe Properly bounds check ioctl/pioctl data arguments for Coda:
1. Use unsigned rather than signed lengths
2. Bound messages to/from Venus to VC_MAXMSGSIZE
3. Bound messages to/from general user processes to VC_MAXDATASIZE
4. Update comment regarding data limits for pioctl

Without (1) and (3), it may be possible for unprivileged user processes to
read sensitive portions of kernel memory.  This issue is only present if
the Coda kernel module is loaded and venus (the userspace Coda daemon) is
running and has /coda mounted.

As Coda is considered experimental and production use is warned against in
the coda(4) man page, and because Coda must be explicitly configured for a
configuration to be vulnerable, we won't be issuing a security advisory.
However, if you are using Coda, then you are advised to apply these fixes.

Reported by:	Dan J. Rosenberg <drosenberg at vsecurity.com>
Obtained from:	NetBSD (Christos Zoulas)
Security:	Kernel memory disclosure; no advisory as feature experimental
MFC after:	3 days
2010-08-07 08:08:14 +00:00
jkim
c750c1a108 Protect shared palette and state buffer with a mutex. Remove defunct
spltty() calls while I am here.
2010-08-07 05:46:04 +00:00
jkim
77b28d0e95 Do not block any I/O port on amd64. 2010-08-07 04:05:58 +00:00
jkim
012f478c81 Optimize interrupt vector lookup. There is no need to check the page table. 2010-08-07 03:45:45 +00:00
neel
e5604e6bc0 - Consolidate the the cache coherence attribute definitions in a single place.
Adapted from Juli's changes to pte.h in the octeon branch:
  http://svn.freebsd.org/viewvc/base/user/jmallett/octeon/sys/mips/include/pte.h

- Set the KX and UX bits in the status register for n64 kernels.

Reviewed by:	jmallett
2010-08-07 01:49:44 +00:00
pjd
fb4dcd8fd5 Various cleanups, mostly to make the test work on FreeBSD/ZFS. 2010-08-06 23:58:54 +00:00
jkim
2c643eaad8 When EC burst mode is activated and multiple bytes are accessed, do not
disable and enable repeatedly, just do it once per call.  It also reduces
code duplication.  Check all parameters early and fail immediately.
2010-08-06 23:35:33 +00:00
jkim
68285361e2 Merge ACPICA 20100806. 2010-08-06 23:11:19 +00:00
jamie
94aa0856b2 Note that a jail without a command parameter will be persistent,
instead of explicitly requiring one of "command" or "persist".

MFC after:	3 days
2010-08-06 22:06:12 +00:00
jamie
37e8c8fb79 Implicitly make a new jail persistent if it's set not to attach.
MFC after:	3 days
2010-08-06 22:04:18 +00:00
pjd
e7da3338b6 ${GREP} can only be used after loading 'conf'. 2010-08-06 21:58:53 +00:00
pjd
f87a4aad92 Don't use egrep directly - use ${GREP}. 2010-08-06 21:57:11 +00:00
pjd
970b3134a2 Check first todo() argument against operating system name and operating system
name plus file system name.
2010-08-06 21:56:32 +00:00
pjd
cf25be5f47 For FreeBSD and Linux use awk's toupper() function.
Suggested by:	ed
2010-08-06 21:53:50 +00:00
pjd
71f17c1253 Convert file system type to upper case. 2010-08-06 21:02:53 +00:00
jfv
6012099d55 Put the early setting of the MAC type back, its
removal resulted in broken code in MSIX setup.
2010-08-06 20:55:49 +00:00
pjd
0d945e4c12 Add tests for mknod(2).
Submitted by:	Jan Senolt <senoltj@centrum.cz>
Submitted by:	Milan Cermak <Milan.Cermak@Sun.COM>
Polished by:	pjd
2010-08-06 20:51:39 +00:00
pjd
3898aedc01 Add mknod(2) support.
Submitted by:	Jan Senolt <senoltj@centrum.cz>
Submitted by:	Milan Cermak <Milan.Cermak@Sun.COM>
2010-08-06 20:48:10 +00:00
pjd
9fed776db8 Sort includes. 2010-08-06 20:46:26 +00:00
bschmidt
7a1d9ddf48 Obviously the option is known as COMPAT_LINUX32 on amd64.
PR:		docs/149182
Pointed out by:	Fernando <fernando.apesteguia at gmail.com>
MFC after:	3 days
2010-08-06 20:18:16 +00:00
ed
b5b833a850 Remove unneeded functions from libcompat.
Erwin fired up a ports build a couple of weeks ago and it seems the
following functions are not used by any of the 20k ports we have, which
makes me believe they don't have any purpose. Just remove them.
2010-08-06 20:13:36 +00:00
ed
933d2e8e14 Remove stale reference to UT_NAMESIZE from <stdio.h>.
Spotted by:	bde@
2010-08-06 19:35:40 +00:00
pjd
c35d47a15b open(2) returns EOPNOTSUPP when trying to open a socket. 2010-08-06 19:22:42 +00:00
pjd
c0ae51d06f Test for EACCES also when opening FIFO or directory. 2010-08-06 19:20:35 +00:00
pjd
4cf064776c Test O_RDONLY|O_RDWR flags as potentially invalid. 2010-08-06 19:19:14 +00:00
pjd
9e5f58cf83 Make description readable. 2010-08-06 19:18:19 +00:00
pjd
177b3b609c Add missing -U argument to usage. 2010-08-06 19:16:48 +00:00
pjd
14f2fd5269 Implement two new syscalls: bind(2) and connect(2) for operating on UNIX
domain sockets.
2010-08-06 19:16:20 +00:00
bschmidt
f5f8eecb32 Fix whitespace nits.
PR:		conf/148989
Submitted by:	pluknet <pluknet at gmail.com>
MFC after:	3 days
2010-08-06 18:46:27 +00:00
yongari
c21b4e698b Fix a typo introduced in r210936 which broke build. 2010-08-06 18:44:07 +00:00
jkim
7246513d8a Import ACPICA 20100806. 2010-08-06 17:28:40 +00:00
mjacob
57aab8cfc7 Figure which is the IO and MEM bars- do not assume that they are in
a fixed order.

PR:		149220
Obtained from:	John Baldwin
MFC after:	1 month
2010-08-06 17:27:00 +00:00
jkim
3ddeb95481 Remove unnecessary casting and simplify code. We are not there yet. ;-) 2010-08-06 17:21:32 +00:00
stefanf
3ed2d72894 Add links for destroy_dev_drain, destroy_dev_sched, destroy_dev_sched_cb,
make_dev_cred and make_dev_credf.
2010-08-06 16:50:48 +00:00
jkim
efe9a6257d Correct argument order of acpi_restorecpu(), which was forgotten in r210804. 2010-08-06 15:59:00 +00:00