Commit Graph

11836 Commits

Author SHA1 Message Date
blackend
dd2833d0d6 Add docs category.
MFC after:	3 days
2009-04-19 08:31:55 +00:00
emax
d771ed46cf Fix bug in event timeout handling
Submitted by:	mav
MFC after:	3 days
2009-04-17 23:33:30 +00:00
jhb
a48e119d84 - Add a few more register defintions for the PCI express capability
registers.
- Cleanup PCI-X capability printf to not leave a dangling "supports" for
  some PCI-X bridges.
- Display additional PCI express details including the negotiated and max
  link width and the actual and maximum supported max payload.

MFC after:	1 month
2009-04-17 19:07:44 +00:00
roberto
b12508be46 Add an entry for the French macbook keyboard layout. 2009-04-17 11:30:32 +00:00
rwatson
aaa8443bf2 Garbage collect raycontrol(8), as ray(4) has been removed.
Pointed out by:	pluknet at gmail.com
2009-04-16 14:43:59 +00:00
kensmith
d83ff0154f Add release package directories for 6.4 and 7.2. 2009-04-15 17:14:43 +00:00
bz
6c258d0e98 In case the peer address was already configured on the interface
we were not properly handling proxy arp. Make sure we (try to) add
the proxy arp entry/entries in this case as well.

PR:		bin/131250
Submitted by:	loos.br gmail.com (Luiz Otavio O Souza)
MFC after:	3 days
2009-04-13 17:57:12 +00:00
ru
6ab30b8e7c Removed more vestiges of if_sl(4). 2009-04-09 12:20:37 +00:00
weongyo
ef3368e983 add uathload.8
Reviewed by:	brueffer
2009-04-08 06:51:58 +00:00
weongyo
87601c01d2 block build of uathload on ia64 temporarily because binutils expects
machine-specific flags to match but ar5523.bin doesn't have.

Pointed by:	marcel
2009-04-08 03:53:20 +00:00
weongyo
32d7e7cf1f Hook uathload up to the build. It's used for loading the firmware for
uath(4).
2009-04-07 01:58:29 +00:00
weongyo
848c24cc3d Add uath(4) to the list of supported network interface. 2009-04-07 01:41:17 +00:00
ed
36d960175a Remove if_ppp(4) and if_sl(4).
Not only did these two drivers depend on IFF_NEEDSGIANT, they were
broken 7 months ago during the MPSAFE TTY import. if_ppp(4) has been
replaced by ppp(8). There is no replacement for if_sl(4).

If we see regressions in for example the ports tree, we should just use
__FreeBSD_version 800045 to check whether if_ppp(4) and if_sl(4) are
present. Version 800045 is used to denote the import of MPSAFE TTY.

Discussed with: rwatson, but also rwatson's IFF_NEEDSGIANT emails on the
                lists.
2009-04-05 22:08:18 +00:00
ru
424510e7af - Style: size_t can't be negative.
- Don't exit with a zero status code when no jails are configured
  on a system.

- Style: simplify some code constructs.

- If a single jail cannot be found, let the caller print a nicer
  diagnostic message.

Reviewed by:	bz
MFC after:	3 days
2009-04-04 16:03:28 +00:00
ru
f2d082b711 Fixed NAME section. 2009-04-04 15:48:09 +00:00
weongyo
3503cf99e3 Add uath(4) wireless USB driver for Atheros AR5005UG and AR5005UX
chipsets.

Reviewed by:	sam
2009-04-04 11:23:00 +00:00
cperciva
8e78b05618 Set SO_NOSIGPIPE on sockets used by phttpget. Without this, if
(1) phttpget is attempting to download enough files that it can't send
all the requests at once, and
(2) the remote server forcibly closes the connection, resulting in RST
packets being sent,
phttpget will receive a SIGPIPE and terminate without downloading all
of the files.

This is probably responsible for a number of hard-to-reproduce errors
with portsnap and freebsd-update.

MFC after:	3 days
2009-04-03 21:13:18 +00:00
trhodes
d7a4b1e1f2 Fix punctuation.
PR:		132834
Submitted by:	"Alan R. S. Bueno" <alan.bsd@gmail.com>
2009-04-01 08:33:54 +00:00
dougb
7f2fbec492 Don't tempt svn to expand the example $FreeBSD strings 2009-03-23 14:42:41 +00:00
rpaulo
651cad1956 Add new build targets for tcpdump 4.0.0. 2009-03-21 18:40:38 +00:00
marius
260910b751 - Sprinkle const.
- Remove incorrect __unused.
2009-03-19 20:24:30 +00:00
dougb
e33dfa4bb1 1. Update for new -F option from r189992.
2. Sort the command line options to match how they are displayed
in usage()
3. Change references to cvs to the more generic "version control system"
and remove the .Xr for cvs
4. Consistently use ".Op Fl" to refer to command line options in the text.
5. Only use the apostrophe to indicate possession.
6. Add FREEBSD_ID (-F) to the list of variables in the example rc,
and change the DIFF_OPTIONS example to -Bb since -F now covers it.
2009-03-18 21:55:08 +00:00
dougb
cdd4481091 Add a new -F option to automatically install files that differ
only by version control Id strings
2009-03-18 21:51:11 +00:00
ganbold
79dc1e1db1 Clear confirm password field first when adding new user.
PR: i386/132580
Reported by: 	ilgiz <ilgiz at reid.ru>
Approved by:    kensmith
2009-03-18 03:56:26 +00:00
delphij
54b298a418 Remove unused local. usbconfig(8) can now compile under
WARNS=6.
2009-03-17 21:21:33 +00:00
sam
68e7f74c45 no need to for gnu89 any more 2009-03-15 01:39:16 +00:00
das
6335284962 Fix build breakage due to the interplay between r189801 and r189824.
In particular, vendor sources that aren't ready for gnu99 should
still be compiled with gnu89. (Before r189824, these would have
generated warnings if you tried to compile them in gnu99 mode,
but the warnings went unheeded due to -Wno-error.)
2009-03-14 22:50:03 +00:00
dougb
9bf35b3af8 1. Clean up usage() output a bit by grouping options that take an argument
2. Fix a comment to refer to the right loop
2009-03-13 08:48:33 +00:00
dougb
b04b18c10b When using the -D option:
1. The new mtree file should be created in the "host" system /tmp
2. The existing mtree file in the "host" system should not be deleted

Submitted by:	scf
2009-03-13 07:34:05 +00:00
grog
5e19c4ab43 Add menus to read install.cfg from any disk device sysinstall can see
(eg USB key, CD) rather than just floppy.

Handle \r\n line termination in a cfg file.

Add keeprcconf variable.

Submitted by: Daniel O'Connor
2009-03-13 03:51:41 +00:00
maxim
5b0bfd0e06 o Turn the batch mode on if stdout is not tty.
Submitted by:	vsevolod
MFC after:	1 week
2009-03-12 13:17:46 +00:00
maxim
816892c353 o Sync synopsis with reality. Remove BUG section -- there is
a batch mode in gpart(8) now.
2009-03-12 13:03:33 +00:00
gnn
73c9516af4 Update the Chelsio driver to the latest bits from Chelsio
Firmware upgraded to 7.1.0 (from 5.0.0).
T3C EEPROM and SRAM added; Code to update eeprom/sram fixed.
fl_empty and rx_fifo_ovfl counters can be observed via sysctl.
Two new cxgbtool commands to get uP logic analyzer info and uP IOQs
Synced up with Chelsio's "common code" (as of 03/03/09)

Submitted by:	 Navdeep Parhar at Chelsio
Reviewed by:	gnn
MFC after:	2 weeks
2009-03-10 19:22:45 +00:00
bms
71233409ea Merge IGMPv3 and Source-Specific Multicast (SSM) to the FreeBSD
IPv4 stack.

Diffs are minimized against p4.
PCS has been used for some protocol verification, more widespread
testing of recorded sources in Group-and-Source queries is needed.
sizeof(struct igmpstat) has changed.

__FreeBSD_version is bumped to 800070.
2009-03-09 17:53:05 +00:00
thompsa
4aa75fa98d Install libusb20.so.1 as libusb.so.1, there will be a followup commit to the
ports tree so that programs use libusb from the base by default. Thanks to
Stanislav Sedov for sorting out the ports build.

Bump __FreeBSD_version to 800069

Help and testing by:	stas
2009-03-09 17:05:31 +00:00
ed
989d9cb005 Make IPXrouted compile using Clang by using ANSI function declarations.
Because of integer promotion, Clang doesn't allow ANSI prototypes to be
mixed with K&R declarations.

Submitted by:	Pawel Worach <pawel worach gmail com>
2009-03-04 18:36:48 +00:00
bms
4fdc56d3dc Add printb.c utility file, but do not yet connect it to the build. 2009-03-04 02:12:29 +00:00
bms
11bf99a374 Add full SSM stack support to mtest(8) diagnostic tool. 2009-03-04 02:09:12 +00:00
bms
ad9d5b75a7 Update mtest(8) manual page. 2009-03-04 02:08:20 +00:00
marcel
4306c4bdaf Write the MBR by using the bootcode verb of the gpart class.
The "write MBR" verb is kept for backward compatibility, but
the DIOCSMBR ioctl has been removed.
2009-03-02 04:35:52 +00:00
sam
ffdb6e3c4e uupdate for 0.6.8 2009-03-02 04:12:41 +00:00
sam
069aa8512b update for 0.6.8 2009-03-02 04:11:34 +00:00
sam
fdc2f0e604 update for 0.6.8 2009-03-02 04:10:40 +00:00
sam
cba727f413 update to 0.6.8
Reviewed by:	thompsa
2009-03-02 02:28:22 +00:00
sam
3ca562853b use ansi prototypes
Submitted by:	Pawel Worach <pawel.worach@gmail.com>
2009-03-01 08:01:38 +00:00
thompsa
1f16c7700d Change USB over to make_dev() for all device nodes, previously it hooked into
the devfs clone handler to open the (invisible) devices on the fly.

The /dev entries are layed out as follows,

 /dev/usbctl      = master device
 /dev/usb/0.1.0.5 = usb device, (<bus>.<dev>.<iface>.<endpoint>)
 /dev/ugen0.1 -> usb/0.1.0.0 = ugen link to ctrl endpoint

This also removes the custom permissions model from USB.  Bump
__FreeBSD_version to 800066.

Submitted by:	rink (earlier version)
2009-02-27 17:27:16 +00:00
ed
fa4082de19 Rename all symbols in libmp(3) to mp_*, just like Solaris.
The function pow() in libmp(3) clashes with pow(3) in libm. We could
rename this single function, but we can just take the same approach as
the Solaris folks did, which is to prefix all function names with mp_.

libmp(3) isn't really popular nowadays. I suspect not a single
application in ports depends on it. There's still a chance, so I've
increased the SHLIB_MAJOR and __FreeBSD_version.

Reviewed by:	deischen, rdivacky
2009-02-26 21:43:15 +00:00
ed
e2be17ec8c Fix LLVM compiler errors related to K&R declarations with ANSI prototypes.
Submitted by:	Pawel Worach <pawel.worach@gmail.com>
2009-02-26 20:59:05 +00:00
thompsa
f1a1841fd4 MFp4 //depot/projects/usb@157974
Add support for setting and getting the USB template value through libusb20 and
usbconfig.

Submitted by:	Hans Petter Selasky
2009-02-24 03:43:05 +00:00
thompsa
67f51fe4b6 Build fixups for the new USB stack. 2009-02-23 18:36:54 +00:00