1) It is not useful to call "devfs_clear_cdevpriv()" from
"d_close" callbacks, hence for example read, write, ioctl and
so on might be sleeping at the time of "d_close" being called
and then then freed private data can still be accessed.
Examples: dtrace, linux_compat, ksyms (all fixed by this patch)
2) In sys/dev/drm* there are some cases in which memory will
be freed twice, if open fails, first by code in the open
routine, secondly by the cdevpriv destructor. Move registration
of the cdevpriv to the end of the drm open routines.
3) devfs_clear_cdevpriv() is not called if the "d_open" callback
registered cdevpriv data and the "d_open" callback function
returned an error. Fix this.
Discussed with: phk
MFC after: 2 weeks
network file systems (not only NFS proper). Short reads cause pages
other then the requested one, which were not filled by read response,
to stay invalid.
Change the vm_page_readahead_finish() interface to not take the error
code, but instead to make a decision to free or to (de)activate the
page only by its validity. As result, not requested invalid pages are
freed even if the read RPC indicated success.
Noted and reviewed by: alc
MFC after: 1 week
to pull vm_param.h was removed. Other big dependency of vm_page.h on
vm_param.h are PA_LOCK* definitions, which are only needed for
in-kernel code, because modules use KBI-safe functions to lock the
pages.
Stop including vm_param.h into vm_page.h. Include vm_param.h
explicitely for the kernel code which needs it.
Suggested and reviewed by: alc
MFC after: 2 weeks
vm_page oflags by providing helper function
vm_page_readahead_finish(), which handles completed reads for pages
with indexes other then the requested one, for VOP_GETPAGES().
Reviewed by: alc
MFC after: 1 week
I found 8.3 is a history BSD version using socket to implement FIFO
pipe, it uses per-file seqcount to compare with writer generation
stored in per-pipe object. The concept is after all writers are gone,
the pipe enters next generation, all old readers have not closed the
pipe should get the indication that the pipe is disconnected, result
is they should get EPIPE, SIGPIPE or get POLLHUP in poll().
But newcomer should not know that previous writters were gone, it
should treat it as a fresh session.
I am trying to bring back FIFO pipe to history behavior. It is still
unclear that if single EOF flag can represent SBS_CANTSENDMORE and
SBS_CANTRCVMORE which socket-based version is using, but I have run
the poll regression test in tool directory, output is same as the one
on 8.3-STABLE now.
I think the output "not ok 18 FIFO state 6b: poll result 0 expected 1.
expected POLLHUP; got 0" might be bogus, because newcomer should not
know that old writers were gone. I got the same behavior on Linux.
Our implementation always return POLLIN for disconnected pipe even it
should return POLLHUP, but I think it is not wise to remove POLLIN for
compatible reason, this is our history behavior.
Regression test: /usr/src/tools/regression/poll
flag but not PIPE_WANTW, but FIFO pipe code does not understand this internal
state, when a FIFO peer reader closes the pipe, it wants to notify the writer,
it checks PIPE_WANTW, if not set, it skips calling wakeup(), so blocked writer
never noticed the case, but in general, the writer should return from the
syscall with EPIPE error code and may get SIGPIPE signal. Setting the
PIPE_WANTW fixed problem, or you can turn off direct write, it should fix the
problem too. This bug is found by PR/170203.
Another bug in FIFO pipe code is when peer closes the pipe, another end which
is being blocked in select() or poll() is not notified, it missed to call
pipeselwakeup().
Third problem is found in poll regression test, the existing code can not
pass 6b,6c,6d tests, but FreeBSD-4 works. This commit does not fix the
problem, I still need to study more to find the cause.
PR: 170203
Tested by: Garrett Copper < yanegomi at gmail dot com >
now fully encapsulates all accesses to f_offset, and extends f_offset
locking to other consumers that need it, in particular, to lseek() and
variants of getdirentries().
Ensure that on 32bit architectures f_offset, which is 64bit quantity,
always read and written under the mtxpool protection. This fixes
apparently easy to trigger race when parallel lseek()s or lseek() and
read/write could destroy file offset.
The already broken ABI emulations, including iBCS and SysV, are not
converted (yet).
Tested by: pho
No objections from: jhb
MFC after: 3 weeks
bwrite(). VFS needs to know about EFAULT from uiomove() and does not
care much that partially filled block writeback after EFAULT was
successfull. Early return without error causes short write to be
reported to usermode.
Reported and tested by: andreast
MFC after: 3 weeks
written, but not msync'd by a process. A VOP_PUTPAGES()
called when VOP_RECLAIM() happens will usually fail, since
the NFSv4 Open has already been closed by VOP_INACTIVE().
Add a vm_object_page_clean() call to the NFSv4 client's
VOP_INACTIVE(), so that the write happens before the NFSv4
Open is closed. kib@ suggested using vgone() instead and
I will explore this, but this patch fixes things in the
meantime. For some reason, the VOP_PUTPAGES() is still
attaempted in VOP_RECLAIM(), but having this fail doesn't
cause any problems except a "stateid0 in write" being logged.
Reviewed by: kib
MFC after: 1 week
Do not brelse() the buffer unconditionally with BIO_ERROR set if
uiomove() failed. The brelse() treats most buffers with BIO_ERROR as
B_INVAL, dropping their content. Instead, if the write request
covered the whole buffer, remember the cached state and brelse() with
BIO_ERROR set only if the buffer was not cached previously.
Update the buffer dirtyoff/dirtyend based on the progress recorded by
uiomove() in passed struct uio, even in the presence of
error. Otherwise, usermode could see changed data in the backed pages,
but later the buffer is destroyed without write-back.
If uiomove() failed for IO_UNIT request, try to truncate the vnode
back to the pre-write state, and rewind the progress in passed uio
accordingly, following the FFS behaviour.
Reviewed by: rmacklem (some time ago)
Tested by: pho
MFC after: 1 month
Revamp the CAM enclosure services driver.
This updated driver uses an in-kernel daemon to track state changes and
publishes physical path location information\for disk elements into the
CAM device database.
Sponsored by: Spectra Logic Corporation
Sponsored by: iXsystems, Inc.
Submitted by: gibbs, will, mav
to freebsd-fs@, where the setfacl of an NFSv4 acl would fail.
This was caused by the VOP_ACLCHECK() call for ZFS replying
EOPNOTSUPP. After discussion with rwatson@, it was determined
that a call to VOP_ACLCHECK() before doing VOP_SETACL() is not
required. This patch fixes the problem by deleting the
VOP_ACLCHECK() call.
Tested by: Andrew Leonard (previous version)
MFC after: 1 week
The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)
This work is still experimental. Please use with caution.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
8.x code:
- If the lock cannot be acquired immediately unlocks 'bar' vnode
and then locks both vnodes in order.
- wrong vnode type panics from cache_enter_time after calls by
ext2_lookup.
The fix merges the fixes from ufs/ufs_lookup.c.
Submitted by: Mateusz Guzik
Approved by: jhb@ (mentor)
Reviewed by: kib@
MFC after: 1 week
Entries with zero inode number are considered placeholders by libc and
UFS. Fix remaining uses of VOP_READDIR in kernel: vop_stdvptocnp,
unionfs.
Sponsored by: Google Summer of Code 2011
used, when the code should actually protect the tested
variable with a mutex. Since the tsleep()s had a 10sec
timeout, the race would have only delayed the allocation
of a new clientid for a client. The sleeps will also
rarely occur, since having a callback in progress when
a client acquires a new clientid, is unlikely.
in practice, since having a callback in progress when
a fresh clientid is being acquired by a client is unlikely.
MFC after: 1 month
memory mapped pages being written back on an NFS mount.
Since any thread can call VOP_PUTPAGES() to write back a
dirty page, the credentials of that thread may not have
write access to the file on an NFS server. (Often the uid
is 0, which may be mapped to "nobody" in the NFS server.)
Although there is no completely correct fix for this
(NFS servers check access on every write RPC instead of at
open/mmap time), this patch avoids the common cases by
holding onto a credential that recently opened the file
for writing and uses that credential for the write RPCs
being done by VOP_PUTPAGES() for both NFS clients.
Tested by: Joel Ray Holveck (joelh at juniper.net)
PR: kern/165923
Reviewed by: kib
MFC after: 2 weeks
- fixed an incorrect lock status issue.
- fixed an incorrect lock issue of unionfs root vnode removed.
(pointed out by keith)
- fixed an infinity loop issue.
(pointed out by dumbbell)
- changed to do LK_RELEASE expressly when unlocked.
Submitted by: ozawa@ongs.co.jp
do not include file attributes in the reply to an NFS create RPC
under certain circumstances.
This resulted in a vnode of type VNON that was not usable.
This patch adds an NFS getattr RPC to nfs_create() for this case,
to fix the problem. It was tested by the person that reported
the problem and confirmed to fix this case for their server.
Tested by: Steven Haber (steven.haber at isilon.com)
MFC after: 2 weeks
ZFS volume is exported via the new NFS server. The leak occurred
because the new NFS server code didn't handle the case where
a file system sets the SAVENAME flag in its VOP_LOOKUP() and
ZFS does this for the DELETE case.
Tested by: Oliver Brandmueller (ob at gruft.de), hrs
PR: kern/167266
MFC after: 1 month
a mount point. Active vnodes are those with a non-zero use or hold
count, e.g., those vnodes that are not on the free list. Note that
this list is in addition to the list of all the vnodes associated
with a mount point.
To avoid adding another set of linkage pointers to the vnode
structure, the active list uses the existing linkage pointers
used by the free list (previously named v_freelist, now renamed
v_actfreelist).
This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops
over just the active vnodes associated with a mount point (typically
less than 1% of the vnodes associated with the mount point).
Reviewed by: kib
Tested by: Peter Holm
MFC after: 2 weeks
The primary changes are that the user of the interface no longer
needs to manage the mount-mutex locking and that the vnode that
is returned has its mutex locked (thus avoiding the need to check
to see if its is DOOMED or other possible end of life senarios).
To minimize compatibility issues for third-party developers, the
old MNT_VNODE_FOREACH interface will remain available so that this
change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH
will be removed in head.
The reason for this update is to prepare for the addition of the
MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the
active vnodes associated with a mount point (typically less than
1% of the vnodes associated with the mount point).
Reviewed by: kib
Tested by: Peter Holm
MFC after: 2 weeks
Since r230208 update mounts were allowed if the list of mount options
contained the "export" option. This is not correct as tmpfs doesn't
really support updating all options.
Reviewed by: kevlo, trociny
Return EPERM from ext2_setattr() when an user without PRIV_VFS_SYSFLAGS
privilege attempts to toggle SF_SETTABLE flags.
Flags are now stored to ip->i_flags in one place after all checks.
Also, remove SF_NOUNLINK from the checks because ext2fs doesn't support
that flag.
Reviewed by: bde
