illumos/illumos-gate@e09ba01dcde09ba01dcdhttps://www.illumos.org/issues/8418
The following line in zfs_validate_name() is just a no-op and it
should be removed:
108 (void) zfs_prop_get_table();
Reviewed by: Vitaliy Gusev <gusev.vitaliy@icloud.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Marcel Telka <marcel@telka.sk>
MFC after: 2 weeks
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
- Store the symbol table contents in an anonymous swap-backed object. Have
mmap(/dev/ksyms) map that object, and stop mapping the symbol table into
the calling process in ksyms_open(). Previously we would cache a pointer
to the pmap of the opening process, and mmap(/dev/ksyms) would create a
mapping using the physical address found by a pmap lookup at the initial
mapping address. However, this assumes that the cached pmap is valid,
which may not be the case. [1]
- Remove the ksyms ioctl interface. It appears to have been added to work
around a limitation in libelf that no longer exists; see r321842.
Moreover, the interface is difficult to support and isn't present in
illumos. Since ksyms was added specifically to support lockstat(1), it
is expected that this removal won't have any real impact.
- Simplify ksyms_read() to avoid unnecessary copying.
- Don't call the device handle destructor if we fail to capture a snapshot
of the kernel's symbol table. devfs will do that for us.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com> [1]
Reviewed by: kib (previous revision)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11789
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
This test is also timeout on a quiet system because there is nobody triggering
read probefunc while test execution.
Reviewed by: gnn, markj, ngie
Differential Revision: https://reviews.freebsd.org/D11731
verifying script which needs being run to complete the test.
While here, add missing shebang.
Reviewed by: gnn, markj, ngie
Differential Revision: https://reviews.freebsd.org/D11716
In Solaris, basename(1) and basename(3) both return "." while being given an
empty string (""), while in BSD (and Linux) basename(1) returns "" and
basename(3) returns "."
While here, also change #!/usr/bin/ksh to #!/usr/bin/env ksh to find ksh in
$PATH
Reviewed by: gnn, markj (earlier version), ngie (earlier version)
Differential Revision: https://reviews.freebsd.org/D11707
We added too many variable assignments in BEGIN block, which will run out of
default auto-configured variable buffer space. The test VM has 4G RAM which
should be enough for most cases so it's reasonable to increase limitation to
these case.
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D11676
We added too many variable assignments in BEGIN block, which will run out of
default auto-configured variable buffer space. The test VM has 4G RAM which
should be enough for most cases so it's reasonable to increase limitation to
these case.
Reviewed by: gnn, markj, ngie
Differential Revision: https://reviews.freebsd.org/D11674
testing.
This test times-out on a quiet system because there is nobody triggers
syscall::open:entry or syscall::: probe while test execution.
Reviewed by: gnn, markj (earlier version)
Differential Revision: https://reviews.freebsd.org/D11671
This test timeout on a quiet system because there is nobody triggers
'syscall::*wait*:entry' probe while test execution.
Reviewed by: gnn, markj, ngie
Differential Revision: https://reviews.freebsd.org/D11668
illumos/illumos-gate@770499e185770499e185https://www.illumos.org/issues/8021
The ARC buf data project (known simply as "ABD" since its genesis in the ZoL
community) changes the way the ARC allocates `b_pdata` memory from using linear
`void *` buffers to using scatter/gather lists of fixed-size 1KB chunks. This
improves ZFS's performance by helping to defragment the address space occupied
by the ARC, in particular for cases where compressed ARC is enabled. It could
also ease future work to allocate pages directly from `segkpm` for minimal-
overhead memory allocations, bypassing the `kmem` subsystem.
This is essentially the same change as the one which recently landed in ZFS on
Linux, although they made some platform-specific changes while adapting this
work to their codebase:
1. Implemented the equivalent of the `segkpm` suggestion for future work
mentioned above to bypass issues that they've had with the Linux kernel memory
allocator.
2. Changed the internal representation of the ABD's scatter/gather list so it
could be used to pass I/O directly into Linux block device drivers. (This
feature is not available in the illumos block device interface yet.)
FreeBSD notes:
- the actual (default) chunk size is 4KB (despite the text above saying 1KB)
- we can try to reimplement ABDs, so that they are not permanently
mapped into the KVA unless explicitly requested, especially on
platforms with scarce KVA
- we can try to use unmapped I/O and avoid intermediate allocation of a
linear, virtual memory mapped buffer
- we can try to avoid extra data copying by referring to chunks / pages
in the original ABD
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Dan Kimmel <dan.kimmel@delphix.com>
MFC after: 3 weeks
Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
illumos/illumos-gate@a4b8c9aa65a4b8c9aa65https://www.illumos.org/issues/8264
Oddly there is a lzc_clone function, but no lzc_promote function.
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@kebe.com>
Approved by: Dan McDonald <danmcd@kebe.com>
Author: Andrew Stormont <astormont@racktopsystems.com>
MFC after: 1 week
illumos/illumos-gate@690031d326690031d326https://www.illumos.org/issues/8168
If we manage to export the pool on which we are creating a dataset (filesystem
or zvol) between entering libzfs`zfs_create() and libzfs`zpool_open() call (for
which we never check the return value) we end up dereferencing a NULL pointer
in libzfs`zpool_close().
This was discovered on ZFS on Linux. The same issue can be reproduced on
Illumos running in parallel:
while :; do zpool import -d /tmp testpool ; zpool export testpool ; done
while :; do zfs create testpool/fs; zfs destroy testpool/fs ; done
Eventually this will result in several core dumps like this one:
[root@52-54-00-d3-7a-01 /cores]# mdb core.zfs.4244
Loading modules: [ libumem.so.1 libc.so.1 libtopo.so.1 libavl.so.1
libnvpair.so.1 ld.so.1 ]
> ::stack
libzfs.so.1`zpool_close+0x17(0, 0, 0, 8047450)
libzfs.so.1`zfs_create+0x1bb(8090548, 8047e6f, 1, 808cba8)
zfs_do_create+0x545(2, 8047d74, 80778a0, 801, 0, 3)
main+0x22c(8047d2c, fef5c6e8, 8047d64, 8055a17, 3, 8047d70)
_start+0x83(3, 8047e64, 8047e68, 8047e6f, 0, 8047e7b)
>
Fix and reproducer (systemtap): https://github.com/zfsonlinux/zfs/pull/6096
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: loli10K <ezomori.nozomu@gmail.com>
MFC after: 2 weeks
illumos/illumos-gate@79809f9cf479809f9cf4https://www.illumos.org/issues/8269
It seems that currently normalization of stddev aggregation is done
incorrectly.
We divide both the sum of values and the sum of their squares by the
normalization factor. But we should divide the sum of squares by the
normalization factor squared to scale the original values properly.
FreeBSD note: the actual change was committed in r316853, this commit
adds the test files and record merge information.
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 1 week
Sponsored by: Panzura
illumos/illumos-gate@471a88e499471a88e499https://www.illumos.org/issues/5380
A stream created with zfs send -p -I contains properties of all snapshots of a
given dataset as opposed to only properties of snapshots in a given range.
Not only this is suboptimal but the receive code also does not filter
properties by the range. So, properties of earlier snapshots would be updated
even though the snapshots themselves are not in the stream (just their
properties).
Given that modifying the snapshot properties requires a TXG sync and that the
snapshots are updated one by one the described behavior may lead to a sever
performance penalty.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 3 weeks
illumos/illumos-gate@8b65a70b768b65a70b76https://www.illumos.org/issues/7541
When calling zpool import, zpool does a few ioctls to ZFS.
zpool allocates a buffer in userland and passes it to the kernel so that ZFS
can copy info into it. ZFS will use it to put the nvlist that describes the
pool configuration.
If the allocated buffer is too small, ZFS will return ENOMEM and the call will
have to be redone. This wastes CPU time and slows down the import process. This
happens very often for the ZFS_IOC_POOL_TRYIMPORT call.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@4dd77f9e384dd77f9e38https://www.illumos.org/issues/7545
When evicting from the ARC, we manipulate some refcount_t's, e.g. arcs_size.
When using zdb to examine a large amount of data (e.g. zdb -bb on a large pool
with small blocks), the ARC may have a large number of entries. If reference
tracking is enabled, there will be ~1 reference for each block in the ARC. When
evicting, we decrement the refcount and have to search all the references to
find the one that we are removing, which is very slow.
Since zdb is typically used to find problems with the on-disk format, and not
with the code it is running, we should disable reference tracking in zdb.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
pthread_cond_timedwait() receives absolute time, not relative. Passing
wrong time there caused two threads of zdb to spin in a tight loop.
MFC after: 1 week
7252 7628 compressed zfs send / receive
illumos/illumos-gate@5602294fda5602294fdahttps://www.illumos.org/issues/7252
This feature includes code to allow a system with compressed ARC enabled to
send data in its compressed form straight out of the ARC, and receive data in
its compressed form directly into the ARC.
https://www.illumos.org/issues/7628
We should have longer, more readable versions of the ZFS send / recv options.
7628 create long versions of ZFS send / receive options
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Dan Kimmel <dan.kimmel@delphix.com>
7386 zfs get does not work properly with bookmarks
illumos/illumos-gate@edb901aab9edb901aab9https://www.illumos.org/issues/7386
The zfs get command does not work with the bookmark parameter while it works
properly with both filesystem and snapshot:
# zfs get -t all -r creation rpool/test
NAME PROPERTY VALUE SOURCE
rpool/test creation Fri Sep 16 15:00 2016 -
rpool/test@snap creation Fri Sep 16 15:00 2016 -
rpool/test#bkmark creation Fri Sep 16 15:00 2016 -
# zfs get -t all -r creation rpool/test@snap
NAME PROPERTY VALUE SOURCE
rpool/test@snap creation Fri Sep 16 15:00 2016 -
# zfs get -t all -r creation rpool/test#bkmark
cannot open 'rpool/test#bkmark': invalid dataset name
#
The zfs get command should be modified to work properly with bookmarks too.
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Marcel Telka <marcel@telka.sk>
8046 Let calloc() do the multiplication in libzfs_fru_refresh
5697e03e6ehttps://www.illumos.org/issues/8046
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pedro Giffuni <pfg@freebsd.org>
MFC after: 3 days
illumos/illumos-gate@8363e80ae7https://github.com/illumos/illumos-gate/commit/8363e80ae72609660f6090766ca8c2c18https://www.illumos.org/issues/7303
This change introduces a new weighting algorithm to improve metaslab selection.
The new weighting algorithm relies on the SPACEMAP_HISTOGRAM feature. As a result,
the metaslab weight now encodes the type of weighting algorithm used
(size-based vs segment-based).
This also introduce a new allocation tracing facility and two new dcmds to help
debug allocation problems. Each zio now contains a zio_alloc_list_t structure
that is populated as the zio goes through the allocations stage. Here's an
example of how to use the tracing facility:
> c5ec000::print zio_t io_alloc_list | ::walk list | ::metaslab_trace
MSID DVA ASIZE WEIGHT RESULT VDEV
- 0 400 0 NOT_ALLOCATABLE ztest.0a
- 0 400 0 NOT_ALLOCATABLE ztest.0a
- 0 400 0 ENOSPC ztest.0a
- 0 200 0 NOT_ALLOCATABLE ztest.0a
- 0 200 0 NOT_ALLOCATABLE ztest.0a
- 0 200 0 ENOSPC ztest.0a
1 0 400 1 x 8M 17b1a00 ztest.0a
> 1ff2400::print zio_t io_alloc_list | ::walk list | ::metaslab_trace
MSID DVA ASIZE WEIGHT RESULT VDEV
- 0 200 0 NOT_ALLOCATABLE mirror-2
- 0 200 0 NOT_ALLOCATABLE mirror-0
1 0 200 1 x 4M 112ae00 mirror-1
- 1 200 0 NOT_ALLOCATABLE mirror-2
- 1 200 0 NOT_ALLOCATABLE mirror-0
1 1 200 1 x 4M 112b000 mirror-1
- 2 200 0 NOT_ALLOCATABLE mirror-2
If the metaslab is using segment-based weighting then the WEIGHT column will
display the number of segments available in the bucket where the allocation
attempt was made.
Author: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
This simplifies make logic/output
While here, remove bogus CFLAGS which look for headers in cddl/lib/libumem.
There aren't any source files there (just Makefiles)
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Aliases are normally given names that include a key that's unique for each
input object file. This, for example, ensures that aliases for identically
named local symbols in different object files don't conflict. However, in
some cases the static linker will leave an undefined alias after merging
identical weak symbols, resulting in a link error. A non-unique name allows
the aliases to be merged as well.
PR: 216871
X-MFC With: r313262
libdtrace needs to append to the input object files' string and symbol
tables. Currently it does so by allocating a larger buffer, copying the
existing sections into them, and swapping pointers in the libelf data
descriptors. However, it also frees those buffers when its processing is
complete, which leads to a double free since the elftoolchain libelf
owns them and also frees them in elf_end(3). Instead, free the buffers
originally allocated by libelf.
MFC after: 2 weeks
When recording probe site addresses in the output DOF file, dtrace -G
needs to emit relocations for the .SUNW_dof section in order to obtain
the addresses of functions containing probe sites. DTrace expects the
addresses to be relative to the base address of the final ELF file,
and the amd64 USDT implementation was relying on some unspecified and
incorrect behaviour in the base system GNU ld to achieve this.
This change reimplements the probe site relocation handling to allow
USDT to be used with lld and newer GNU binutils. Specifically, it
makes use of R_X86_64_PC64/R_386_PC32 relocations to obtain the
probe site address relative to the DOF file address, and adds and uses a
new DOF relocation type which computes the final probe site address using
these relative offsets.
Reported by and discussed with: Rafael Espíndola
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9374
It's pretty unlikely to actually hit this, but good to check it anyway
Reported by: Coverity
CID: 1362018
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Also save only high bits in the ipv4_flags, because it is defined
as uint8_t. So now it will show DF and MF flags as 0x40 and 0x20.
Reviewed by: markj@
MFC after: 1 week
dtrace converts pairs of consecutive underscores in a probe name to dashes.
When dtrace -G processes relocations corresponding to USDT probe sites, it
performs this conversion on the corresponding symbol names prior to looking
up the resulting probe names in the USDT provider definition. However, in
so doing it would actually modify the input object's string table, which
breaks the string suffix merging done by recent binutils. Because we don't
care about the symbol name once the probe site is recorded, just perform the
probe lookup using a temporary copy.
Reported by: hrs, swills
MFC after: 3 weeks
Enumeration of return probes involves disassembling subroutines in the
target process, and ptrace(2) is currently used to read from the target
process. libproc could read from the backing file instead to avoid this
problem, but in the common case libdtrace will have a writeable handle
on the process anyway. In particular, a writeable handle is needed to list
USDT probes, and libdtrace will cache such a handle for processes that it
controls via dtrace -c and -p.
This change adds some handling for the equivalent of Solaris' PGRAB_*
flags. In particular, support for PGRAB_RDONLY is needed to avoid a
nasty deadlock: dtrace(1) may otherwise stop the master process for its
pseudo-terminal and end up blocking while writing to standard output.
When looking up an object by name, allow prefix matches if no direct match
is found. This allows one to, for example, match libc entry probes with:
# dtrace -n 'pid$target:libc.so::entry' -c ./foo
instead of requiring "libc.so.7" or a glob.
Also remove proc_obj2map() as it currently just duplicates the
functionality of proc_name2map(). It's supposed to take a Solaris
link-map ID as a paramter, but support for this isn't implemented and
isn't required to support DTrace's pid provider.
Fix a segfault in ctfmerge(1) due to a bug in GCC.
The change was correct and the bug real, but upstream didn't adopt it
and we want to remain in sync. When/if upstream does something about it
we can bring their version.
The bug in question was fixed in GCC 4.9 which is now the default in
FreeBSD's ports. Our native gcc-4.2, which is still in use in some Tier-2
platforms also has a workaround so no end-user should be harmed by the
revert.
due to zl_itx_list_sz not updated when async itx'es upgraded to sync.
Actually because of other changes about that time zl_itx_list_sz is not
really required to implement the functionality, so this patch removes
some unneeded broken code and variables.
Original idea of zil_slog_limit was to reduce chance of SLOG abuse by
single heavy logger, that increased latency for other (more latency critical)
loggers, by pushing heavy log out into the main pool instead of SLOG. Beside
huge latency increase for heavy writers, this implementation caused double
write of all data, since the log records were explicitly prepared for SLOG.
Since we now have I/O scheduler, I've found it can be much more efficient
to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE
to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG.
Existing ZIL implementation had problem with space efficiency when it
has to write large chunks of data into log blocks of limited size. In some
cases efficiency stopped to almost as low as 50%. In case of ZIL stored on
spinning rust, that also reduced log write speed in half, since head had to
uselessly fly over allocated but not written areas. This change improves
the situation by offloading problematic operations from z*_log_write() to
zil_lwb_commit(), which knows real situation of log blocks allocation and
can split large requests into pieces much more efficiently. Also as side
effect it removes one of two data copy operations done by ZIL code WR_COPIED
case.
While there, untangle and unify code of z*_log_write() functions.
Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing
block boundary, that may also improve efficiency if ZPL is made to do that.
Sponsored by: iXsystems, Inc.
These are FreeBSD-specific and were added in r178576 to provide the ability
to pretty-print instances of compound types. However, the print action has
long since been augmented to provide this functionality with a simpler
interface.
Discussed with: gnn
Differential Revision: https://reviews.freebsd.org/D8478
illumos/illumos-gate@620f322510620f322510https://www.illumos.org/issues/6051
Currently lzc_receive() requires that its snapname argument is a snapshot name
(contains '@').
zfs receive allows to specify just a dataset name and would try to deduce the
snapshot name from the stream.
I propose to allow lzc_receive() to do the same.
That seems to be quite easy to implement, it requires only a small amount of
logic, it does not require any additional system calls or any additional data
from the stream.
The benefit is that the new behavior would allow to keep the snapshot names the
same between the sender and receiver at zero cost, without a need to pass the
names out of band.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@icyb.net.ua>
MFC after: 2 weeks
(gpt)zfsboot will read one-time boot directives from a special ZFS pool
area. The area was previously described as "Boot Block Header", but
currently it is know as Pad2, marked as reserved and is zeroed out on
pool creation. The new code interprets data in this area, if any, using
the same format as boot.config. The area is immediately wiped out.
Failure to parse the directives results in a reboot right after the
cleanup. Otherwise the boot sequence proceeds as usual.
zfsbootcfg writes zfsboot arguments specified on its command line to the
Pad2 area of a disk identified by vfs.zfs.boot.primary_pool and
vfs.zfs.boot.primary_vdev kenv variables that are set by loader during
boot. Please see the manual page for more.
Thanks to all who reviewed, contributed and made suggestions! There are
many potential improvements to the feature, please see the review for
details.
Reviewed by: wblock (docs)
Discussed with: jhb, tsoome
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D7612
The untyped probe arguments have a width larger than int on such platforms,
so printing their value without a cast can give unexpected results.
MFC after: 1 week
illumos/illumos-gate@f9eb9fdf19https://github.com/illumos/illumos-gate/commit/f9eb9fdf196b6ed476e4ffc69cecd8b0d
a3cb7e7
https://www.illumos.org/issues/6451
Sometimes ztest fails because zdb detects checksum errors. e.g.:
Traversing all blocks to verify checksums and verify nothing leaked ...
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 8000160> DVA0=<0:1cc2000:
180000> [L0 other uint64[]] sha256 uncompressed LE contiguou
s unique single size=100000L/100000P birth=271L/271P fill=1
cksum=c5a3e27d1ed0f894:843bca3a5473c4bf:f76a19b6830a2e4:91292591613a12bf --
skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 800000180> DVA0=<0:ce16800:
180000> [L0 other uint64[]] sha256 uncompressed LE contigu
ous unique single size=100000L/100000P birth=840L/840P fill=1
cksum=5d018f3d061e17f3:6d1584784587bf63:2805a74a0ce37369:ba68a214806c7e75
-- skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 1000000360> DVA0=<0:10d37400:
180000> [L0 other uint64[]] sha256 uncompressed LE conti
guous unique single size=100000L/100000P birth=904L/904P fill=1
cksum=fa1e11d4138bd14b:86c9488c444473e3:f31e43c72e72e46b:e3446472d1174d
ba -- skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 400000002c0> DVA0=<0:127ef400:
180000> [L0 other uint64[]] sha256 uncompressed LE cont
iguous dedup single size=100000L/100000P birth=549L/549P fill=1
cksum=30e14955ebf13522:66dc2ff8067e6810:4607e750abb9d3b3:6582b8af909fcb
58 -- skipping
zdb_blkptr_cb: Got error 50 reading <657, 5, 0, 1c0> DVA0=<0:1a180400:180000>
[L0 other uint64[]] fletcher4 uncompressed LE contiguou
s unique single size=100000L/100000P birth=1091L/1091P fill=1 cksum=a6cf1e50:
29b3bd01c57e5:36779b914035db9a:db61cdcf6bec56f0 -- skippin
g
The problem is that ztest_fault_inject() can inject multiple faults into the
same block. It is designed such that it can inject errors on all leafs of a
RAID-Z or mirror, but for a given range of offsets, it will only inject errors
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Jorgen Lundman <lundman@lundman.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
7147 ztest: ztest_ddt_repair fails with ztest_pattern_match assertion
illumos/illumos-gate@aab8072633https://github.com/illumos/illumos-gate/commit/aab80726335c76a7cae32c7300890248d
73a51e3
https://www.illumos.org/issues/7147
Here's the dbuf we're currently reading:
966f200::dbuf
addr object lvl blkid holds os
966f200 4 0 0 1 ztest/ds_3
966f200::print dmu_buf_t db_data
db_data = 0x9ae0400
0x9ae0400/10J
0x9ae0400: c1c7ced932020d c1c7ced932020d c1c7ced932020d c1c7ced932020d
c1c7ced932020d c1c7ced932020d c1c7ced932020d c1c7ced932020d
c1c7ced932020d c1c7ced932020d
The pattern we're expecting is actually this: a34ae10b5f2db2. If we attempt to
read the block on disk we find that it has matches what ztest_ddt_repair()
would have written:
~c1c7ced932020d=J
ff3e383126cdfdf2
966f200::print dmu_buf_impl_t db_blkptr | ::blkptr
DVA0=<0:71d3c00:800>
[L0 UINT64_OTHER] SHA256 OFF LE contiguous dedup single
size=400L/400P birth=55L/55P fill=1
cksum=18486450d3ce8c6d:75a72f4bbf117b0f:2d3a226314eb5650:2eb0fd68648b1af0
1. zdb -U /rpool/tmp/zpool.cache -R ztest 0:71d3c00:800 | head
Found vdev type: mirror
0:71d3c00:800
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
000000: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000010: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000020: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000030: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000040: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000050: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@dcbf3bd6a1dcbf3bd6a1https://www.illumos.org/issues/6950
When reading compressed data from disk, the ARC should keep the compressed
block cached and only decompress it when consumers access the block. The
uncompressed data should be short-lived allowing the ARC to cache a much larger
amount of data. The DMU would also maintain a smaller cache of uncompressed
blocks to minimize the impact of decompressing frequently accessed blocks.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@759e89be35https://github.com/illumos/illumos-gate/commit/759e89be359f2af635e4122d147df56bc
e948773
https://www.illumos.org/issues/6447
I got a patch from someone who uses nvpair code outside of illumos. It fixes a
couple of gcc warnings/bugs for him.
1. silence uninitialized use warnings
2. add parentheses around assignment used as truth value
3. fix printf format specifier (ll is for integers only)
4. strstr, strspn, strcspn, and strcmp are declared in string.h, not
strings.h.
5. avoid scanning integer into boolean variable
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Steve Dougherty <sdougherty@barracuda.com>
illumos/illumos-gate@9adfa60d48https://github.com/illumos/illumos-gate/commit/9adfa60d484ce2435f5af77cc99dcd4e6
92b6660
https://www.illumos.org/issues/6314
Callers of dsl_dataset_name pass a buffer of size ZFS_MAXNAMELEN, but
dsl_dataset_name copies the datasets' name PLUS the snapshot name to it,
resulting in a max of 2 * ZFS_MAXNAMELEN + '@'.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@8808ac5daehttps://github.com/illumos/illumos-gate/commit/8808ac5dae118369991f158b6ab736cb2
691ecde
https://www.illumos.org/issues/4521
zfstest is trying to execute evil "zfs unmount -a", which fails (fortunately,
as it would otherwise leave me with my ~ missing):
03:44:11.86 cannot unmount '/export/home/yuri': Device busy cannot unmount '/
export/home': Device busy
03:44:11.86 ERROR: /usr/sbin/zfs unmount -a exited 1
This affects, at least, zfs_mount_009_neg and zfs_mount_all_001_pos, both
failing on that step. The pool containing the /export/home hierarchy is
included in KEEP variable, but it doesn't seem to affect anything here.
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
6879 incorrect endianness swap for drr_spill.drr_length in libzfs_sendrecv.c
illumos/illumos-gate@20fea7a474https://github.com/illumos/illumos-gate/commit/20fea7a47472aceb64d3ed48cc2a3ea26
8bc4795
https://www.illumos.org/issues/6879
In libzfs_sendrecv, there's a typo:
case DRR_SPILL:
if (byteswap) {
drr->drr_u.drr_write.drr_length =
BSWAP_64(drr->drr_u.drr_spill.drr_length);
}
Instead of drr_write.drr_length, we should be assigning the result of the
byteswap to drr_spill.drr_length.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Dan Kimmel <dan.kimmel@delphix.com>
illumos/illumos-gate@4a20c933b1https://github.com/illumos/illumos-gate/commit/4a20c933b148de8a1c1d3538391c64284
e636653
https://www.illumos.org/issues/6111
If you create a zfs child folder, zfs send returns an error when a recursive
incremental send is done between two snapshots made prior to the folder
creation.
The problem can be reproduced with the following steps.
root@zfs:/# zfs create pool/test
root@zfs:/# zfs snapshot pool/test@snap1
root@zfs:/# zfs snapshot pool/test@snap2
root@zfs:/# zfs create pool/test/child
root@zfs:/# zfs send -R -I pool/test@snap1 pool/test@snap2 > /dev/null
WARNING: could not send pool/test/child@snap2: does not exist
WARNING: could not send pool/test/child@snap2: does not exist
root@zfs:/# echo $?
1
root@zfs:/# zfs snapshot -r pool/test@snap3
root@zfs:/# zfs send -R -I pool/test@snap1 pool/test@snap3 > /dev/null
root@zfs:/# echo $?
0
root@zfs:/# zfs send -R -I pool/test@snap2 pool/test@snap3 > /dev/null
root@zfs:/# echo $?
0
Since pool/test/child was created after snap2, zfs send should not expect snap2
to be in pool/test/child when doing a recursive send. It should examine the
compare the creation time of the snapshot and each child folder to decide if
the folder will be sent. The next incremental send between snap2 and snap3
would properly create the child folder and snap3 which first appears in the
child folder.
The problem is identical if '-i' is used instead of '-I'.
Reviewed by: Alex Aizman alex.aizman@nexenta.com
Reviewed by: Alek Pinchuk alek.pinchuk@nexenta.com
Reviewed by: Roman Strashkin roman.strashkin@nexenta.com
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Alex Deiter <alex.deiter@nexenta.com>
6902 speed up listing of snapshots if requesting name only and sorting by name
This was our change from the beginning, so just reduce the upstream diff.
6876 Stack corruption after importing a pool with a too-long name
illumos/illumos-gate@c971037baac971037baahttps://www.illumos.org/issues/6876
Calling dsl_dataset_name on a dataset with a 256 byte buffer is asking for
trouble. We should check every dataset on import, using a 1024 byte buffer and
checking each time to see if the dataset's new name is longer than 256 bytes.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Paul Dagnelie <pcd@delphix.com>
Previously, ctf_member_info() would ignore members belonging to an
anonymous struct or union. This made it impossible to, for example, trace
the m_next field of an mbuf using DTrace.
Reported and tested by: gallatin
MFC after: 2 weeks
- TESTSBASE and LOCALBASE are already defined in bsd.tests.mk
- TESTSDIR is automatically divined as ${TESTSBASE}${RELDIR:H} after
r289158.
- Replace SRCDIR with SRCTOP
MFC after: 1 week
X-MFC with: r305019
Sponsored by: EMC / Isilon Storage Division
* TESTSDIR is supposed to be under cddl/usr.sbin, not cddl/sbin
* DevdCtl::EventBuffer no longer exists, so remove its forward
declaration
MFC after: 3 days
X-MFC-With: r305013
There are two cases where changing canmount should result in an action:
- canmount is set to off for a mounted filesystem
- canmount is set to on for an unmounted filesystem
Before r297521 we could unmount and re-mount a filesystem when that was
not necessary, but after r297521 we only handled the first of the above
cases.
MFC after: 5 days
Have it print the contents of aggregations, if any. Otherwise, one needs to
kill the running script to view the collected data, or add code to
periodically print it.
Discussed with: gnn
MFC after: 1 month
7085 add support for "if" and "else" statements in dtrace
illumos/illumos-gate@c3bd3abd88
Add syntactic sugar to dtrace: "if" and "else" statements. The sugar is
baked down to standard dtrace features by adding additional clauses with
the appropriate predicates.
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
Relnotes: yes
Both test suites require more memory than my amd64 VM using
GENERIC-NODEBUG can provide and reliably panic it with OOM issues in
dtrace(4).
Some of the testcases fail, but this at least bypasses the panic behavior
on platforms that don't have enough resources
MFC after: 2 weeks
Discussed with: markj
Sponsored by: EMC / Isilon Storage Division
This resolves a -Wformat issue when the value is used as a format width
precision specifier, i.e. %*s
MFC after: 1 month
Reported by: clang
Sponsored by: EMC / Isilon Storage Division
Note: conversion of the manual page change from roff to mdoc is mine.
illumos/illumos-gate@b702644a6eb702644a6ehttps://www.illumos.org/issues/7164
If the pool/dataset command-line argument is specified with a trailing
slash, for example, "tank/", we should interpret it as the topmost
dataset (rather than the whole pool)
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Tim Chase <tim@chase2k.com>
PR: 204661
MFC after: 1 week
Relnotes: yes
illumos/illumos-gate@ae24175b2bae24175b2bhttps://www.illumos.org/issues/6391
When using zdb with non-default SPA config file it is not convenient
to add -U <non-default-config-file-path> all the time. This commit
introduces support for setting/overriding SPA config location via
environment variable 'SPA_CONFIG_PATH'.
If -U flag is specified in the command line it will override any other
value as usual.
64d7b6cf75
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Cyril Plisko <cyril.plisko@mountall.com>
MFC after: 1 week
setting a 32 bit value on each socket. This can be used by applications
and DTrace as a rendezvous point so that an applicaton's data can
more easily be captured at run time. Expose the user cookie via
DTrace by updating the translator in tcp.d and add a quick test
program, a TCP server, that sets the cookie on each connection
accepted.
Reviewed by: hiren
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D7152
cddl/lib/libavl/Makefile
cddl/lib/libctf/Makefile
cddl/lib/libnvpair/Makefile
cddl/lib/libumem/Makefile
cddl/lib/libuutil/Makefile
Increase WARNS to the highest working level for each of these
libraries
Approved by: re (gjb, hrs)
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
lib/libdevdctl/consumer.cc
In Consumer::DisconnectFromDevd, don't close the socket if it's
already closed.
cddl/usr.sbin/zfsd/case_file.cc
lib/libdevdctl/consumer.h
Delete dead code leftover from before devd(8) gained SOCK_SEQPACKET
support
Reported by: Coverity
CID: 1356155, 1356169
Sponsored by: Spectra Logic Corp
Add zfsd, which deals with hard drive faults in ZFS pools. It manages
hotspares and replements in drive slots that publish physical paths.
cddl/usr.sbin/zfsd
Add zfsd(8) and its unit tests
cddl/usr.sbin/Makefile
Add zfsd to the build
lib/libdevdctl
A C++ library that helps devd clients process events
lib/Makefile
share/mk/bsd.libnames.mk
share/mk/src.libnames.mk
Add libdevdctl to the build. It's a private library, unusable by
out-of-tree software.
etc/defaults/rc.conf
By default, set zfsd_enable to NO
etc/mtree/BSD.include.dist
Add a directory for libdevdctl's include files
etc/mtree/BSD.tests.dist
Add a directory for zfsd's unit tests
etc/mtree/BSD.var.dist
Add /var/db/zfsd/cases, where zfsd stores case files while it's shut
down.
etc/rc.d/Makefile
etc/rc.d/zfsd
Add zfsd's rc script
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c
Fix the resource.fs.zfs.statechange message. It had a number of
problems:
It was only being emitted on a transition to the HEALTHY state.
That made it impossible for zfsd to take actions based on drives
getting sicker.
It compared the new state to vdev_prevstate, which is the state that
the vdev had the last time it was opened. That doesn't make sense,
because a vdev can change state multiple times without being
reopened.
vdev_set_state contains logic that will change the device's new
state based on various conditions. However, the statechange event
was being posted _before_ that logic took effect. Now it's being
posted after.
Submitted by: gibbs, asomers, mav, allanjude
Reviewed by: mav, delphij
Relnotes: yes
Sponsored by: Spectra Logic Corp, iX Systems
Differential Revision: https://reviews.freebsd.org/D6564
The DTraceToolkit is part of the Open DTrace effort and is supported
on FreeBSD as a port (sysutils/DTraceToolkit) which has been updated
to properly track toolkit development upstream.
Sponsored by: DARPA, AFRL
When getline(3) in 2009 was added a _WITH_GETLINE guard has also been added.
This rename is made in preparation for the removal of this guard
Obtained from: NetBSD
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
Fix a related typo while here.
Note, this change results in the Kyuafile inclusion in the runtime
package, which needs to be fixed, however addresses the PR as far
as I can tell in my tests.
PR: 209114
Submitted by: ngie
Sponsored by: The FreeBSD Foundation
illumos/illumos-gate@26455f9efc26455f9efchttps://www.illumos.org/issues/6052
At the moment type parameter of lzc_create() is of dmu_objset_type_t type.
That exposes an implementation detail and requires sys/fs/zfs.h to be included
in libzfs_core.h creating unnecessary coupling between libzfs_core interface
and ZFS internals.
I think that dmu_objset_type_t should be replaced with a libzfs_core
enumeration of supported dataset types.
For ABI reasons the new enumeration could be bit-compatible with
dmu_objset_type_t.
For example:
typedef enum {
LZC_DST_ZFS = 2,
LZC_DST_ZVOL
} lzc_dataset_type_t;
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
MFC after: 2 weeks
Sponsored by: ClusterHQ
This allows one to enable DTrace probes relatively early during boot,
during SI_SUB_DTRACE_ANON, before dtrace(1) can invoked. The desired
enabling is created using dtrace -A, which writes a /boot/dtrace.dof
file and uses nextboot(8) to ensure that DTrace kernel modules are loaded
and that the DOF file describing the enabling is loaded by loader(8)
during the subsequent boot. The trace output can then be fetched with
dtrace -a.
With this commit, boot-time DTrace is only functional on i386 and amd64: on
other architectures, the high-resolution timer frequency is initialized
during SI_SUB_CLOCKS and is thus not available when the anonymous
tracing state is initialized. On x86, the TSC is used and is thus available
earlier.
MFC after: 1 month
Relnotes: yes
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Author: Will Andrews <will@firepipe.net>
Closes#83Closes#32openzfs/openzfs@9663688425
FreeBSD already had `zpool labelclear` functionality, so this is mostly
just a diff reduction.
MFC after: 1 month
Previously this operation tried to unmount and remount children.
Also see https://www.illumos.org/issues/6428.
MFC after: 2 weeks
X-Needs-Upstreaming: illumos
When force-receiving a filesystem that was already mounted the re-created
filesystem is mounted despite -u flag.
Also see https://www.illumos.org/issues/6412.
PR: 204705
Tested by: Vladimir Krstulja <vlad-fbsd@acheronmedia.com>
MFC after: 2 weeks
X-Needs-Upstreaming: illumos
6739 userland version of cv_timedwait_hires() always assumes absolute time
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@41c6413cb5
calloc(3) is faster and occasionally safer than malloc(3) + bzero(3).
In one case, pointed out by Mark[1], this also cleans up a calculation.
Reviewed by: markj [1]
MFC after: 1 week
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Joshua M. Clulow <jmc@joyent.com>
illumos/illumos-gate@b211eb9181
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Gerhard Roethlin <git@the-color-black.net>
illumos/illumos-gate@cb605c4d8a
