d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,173 Commits 4 Branches 49 Tags 2 GiB
dead78fed7
Commit Graph

475 Commits

Author SHA1 Message Date
rgrimes
dead78fed7 The model string can be 40 bytes long with no terminating null, so 
convert all nulls to spaces and then print it with a %40s.
 1994-02-22 18:51:27 +00:00
rgrimes
41e2d032a3 Cleanup the lptprobe and lpt_port_test routine to be KNF. 1994-02-22 09:05:13 +00:00
rgrimes
a211a547e1 This is Jordans probe code fixes. Tested on LU002, FX001D. Then I went 
in and cleaned the spaces vs tabs up, and made the code a little closer
to KNF.
 1994-02-22 08:44:31 +00:00
rgrimes
2816b4dcc8 >From: "Andrew A. Chernov" <ache@freefall.cdrom.com> 
Subject: Bugfix for SB16 with DSP version 4 and above

No description sent, but it appears to fix a major number problem
with certain models of the SB16.
 1994-02-21 14:20:45 +00:00
rgrimes
b88ba1eedf Clean up dmesg output so that it matches the scsi stuff. 
Small hack, if heads > 16, output a warning and then set the head
count to 16.  This stops the infinite loop on this error and allows
people to later fix the DOS parameter table later with fdisk.
 1994-02-21 12:32:33 +00:00
rgrimes
3a91bdd2d7 Protect some printf's with #ifdef DEBUG 1994-02-21 05:45:06 +00:00
ache
1f42e0f11d Fix bug with DSP ver2.0, frequency reduced from 44100 to 22050 1994-02-20 09:37:27 +00:00
rgrimes
d6a88ab6a1 I (rgrimes) cleaned the code up some, mostly just format stuff. 
>From: csgr@alpha.ru.ac.za (Geoff Rehmet)
Date: Wed, 16 Feb 1994 21:28:06 +0200 (GMT+0200)

New version of lpt, most of the brokenness fixed.
 1994-02-17 10:20:18 +00:00
rgrimes
2fb7cb3f03 I don't want to read about all the people that forgot this due to syscons 
changes, so I am adding it here until AFTER the 1.1 release:
+ COPTFLAGS+=-D__FreeBSD__
 1994-02-17 06:51:15 +00:00
rgrimes
0793a0cee8 Increase the timout on aha_send_mbox from 1ms to 3ms, needed to reliably 
run Exabyte 8505 on 1742's.  This may not be the final solution, but it
makes it work.  It may be better to change the DELAY(10) to DELAY(30)
inside the loop instead of increasing the loop count from 100 to 300.
 1994-02-17 05:48:08 +00:00
nate
eed2243f2e From: Jim Babb <babb@sedhps01.mdc.com> 
Date: Mon, 14 Feb 94 15:57:14 CST

This adds a copyright to the fdc.h file and fixes a bug in re-tries
during writes on a heavily loaded system.
 1994-02-14 22:24:28 +00:00
nate
8b39beda58 From: Jim Babb <babb@sedhps01.mdc.com> 
Subject: Bug Fix for ft.c - please commit
Date: Mon, 14 Feb 94 10:22:54 CST

This fixes a bug where the system can crash if the tape is used
after the floppy has been used.
 1994-02-14 19:22:34 +00:00
jkh
872e15cb55 Use -Z instead of -z to build kernels. This is consistent with NetBSD's 
usage of the -[Zz] flags (we're now in sync).  Part of the ld update
changes.
 1994-02-13 20:37:32 +00:00
dg
6c375f74c6 Fixed bug in handling of COW - the original code was bogus and it was 
only accidental that it worked. Also, don't cache non-managed pages.
 1994-02-13 08:29:33 +00:00
nate
8e49976bc6 Added third parameter to wdwait which contains the amount of time to 
'wait' based on suggestion by Rod in -hackers.

No functional change as all the TIMEOUTS are identical currently, but
this will probably change.
 1994-02-11 12:02:35 +00:00
dg
9c5d30c550 Patch from John Dyson: 
a pv chain was being traversed while interrupts were
	fully enabled in pmap_remove_all ... this is bogus, and
	has been fixed in pmap.c. (sorry for adding the splimp)
 1994-02-10 03:03:44 +00:00
nate
b689f3d1d1 Commented on what the mse0, mcd0, and lpt/lpa devices were used for. 
(No functional changes)
 1994-02-09 05:35:57 +00:00
dg
9ee826aa97 From: Dave Matthews <dave@prlng.co.uk> 
Description:
The integer overflow instruction (into) and the interrupt instruction with
value 4 (int #4) both give rise to SIGBUS signals rather than SIGFPE.  The
problem is that overflow is a trap not a fault (unlike the BOUND instruction).
 1994-02-08 12:58:44 +00:00
dg
150455819b Fixed bugs in stack grow code, and moved it back into a seperate function 
like it was originally. Also added back call to "grow" in sendsig now
that this routine actually works.
 1994-02-08 09:26:04 +00:00
dg
10c644bf47 Fixes from John Dyson to fix out-of-memory hangs and other problems (such 
as increased swap space usage) related to (incorrectly) paging out the
page tables.
 1994-02-08 03:07:58 +00:00
alm
4c1e7c072c Tentative fdc patches... 1994-02-07 22:12:45 +00:00
ache
60fda7adb1 Change all siointr (expect in Vsio, of course) to comintr1 
This saves two commands per each direct comintr1 call,
allows some strict check in siointr and also
fix bug with suspended output on multiport cards
 1994-02-07 18:37:21 +00:00
dg
b133b056b5 Fixed bug in probe that was causing it to always probe true. 1994-02-07 15:46:22 +00:00
ache
664037c890 Add "wdx: not found" diagnostic missed in previous commits 1994-02-07 15:40:38 +00:00
rgrimes
6aafc49d11 Remove the ft driver, it causes instant reboots during attatch, and this 
was new code added at the last minute!
 1994-02-07 10:42:04 +00:00
dg
f86742af87 Fixed calculation of physmem when the special MAXMEM kernel config overide 
is used. This bug caused the buffer cache to be WAY too big when memory
was being restricted - resulting in hangs and other out of memory problems.
 1994-02-07 07:44:42 +00:00
alm
73a43165f2 Add floppy tape support (missed these when changing G*) 1994-02-07 05:55:50 +00:00
alm
84e9f2ea7d Add floppy tape support 1994-02-07 04:27:59 +00:00
alm
0e4e4906a6 Add floppy tape driver - fd => fdc 1994-02-07 04:27:13 +00:00
dg
3ad425af2f Nuke bogus error message 1994-02-07 04:20:57 +00:00
dg
4b7235d634 From: Chris Wiener <cwiener@CRLABS.COM> 
When the keyboard is probed, the LED's blink quickly and
"Keyboard reset failed" is printed on the console.  The
init routine keeps trying endlessly with the same behavior
as above.

I got the latest -current sup sources (06-Feb-94 12:00 GMT) to work using the
old syscons.c.  The following patch makes the new syscons work:
 1994-02-07 02:14:27 +00:00
dg
9e053b094d At the suggestion of Bruce Evans, don't zero RTC diag register. Doing so 
was causing problems for some machines.
 1994-02-06 22:48:13 +00:00
jkh
e8b6460e30 Patches to allow the pcvt port to simply "drop in" with a minimum of 
effort.
 1994-02-06 22:11:00 +00:00
jkh
d1434da5b3 Gunter Jung's fixes for the much-maligned lpt driver 1994-02-06 22:06:58 +00:00
ats
d8c750193a Fixed up the compiler warnings. 1994-02-06 17:03:17 +00:00
ache
4194a396a1 1) Proper fix for suspended output in multiport case 
2) IIR_NOPEND is really *one* bit, we don't need to check whole MASK
 1994-02-06 11:59:35 +00:00
rgrimes
d6b9f70ffa Update for new format of cd_toc_entry that was changed in sys/cdio.h. 1994-02-06 11:33:25 +00:00
rgrimes
78196d129c Increase the TIMEOUT value that keeps getting nuked to 300 mSEC, I set it 
to 1.1 secounds this time (ie, TIMEOUT=10000).
 1994-02-06 02:56:11 +00:00
chmr
7ce1384095 Make the screen savers runtime switchable. Everybody wants a 
different default saver, and the size increase in the kernel is
minimal ( < 2.5K ).
 1994-02-04 10:36:15 +00:00
dg
bf8b800553 if_ep.c: removed netisr.h, fixed unconverted ep_ac, changed <> into "" 
for include files.
if_ed, if_ie, if_is: don't include netisr.h.
 1994-02-03 11:51:12 +00:00
ache
1e80a7b9b2 Make BLANK_SAVER default to stop best saver war. 1994-02-02 23:10:55 +00:00
ache
e844cf9bb7 Fix error in multiport part: 
while input char not entered, output was suspended
 1994-02-02 16:41:26 +00:00
dg
164b10596f Added 8003EB board type. Clue from Gerard J van der Grinten (gvdg@cdc.com) 1994-02-02 14:05:58 +00:00
dg
a4348210bb Added type code for 8003W. 1994-02-02 02:24:42 +00:00
dg
8ae65955af Minor cleanup. Decode state information better in the case of a fatal 
trap.
 1994-02-01 23:07:35 +00:00
nate
80bd0bbd20 Moved paren in sgetc to where it belongs. (My fault, I must have wiped it 
out when I applied the patch to get the new features by hand)
 1994-02-01 19:04:18 +00:00
rich
dc70dc2487 Add missing arg to Debugger() call. 
Add missing close paren in sgetc() definition.
 1994-02-01 15:09:10 +00:00
ache
2d4503f95a Make old SNAKE_SAVER code compile with new syscons changes. 1994-02-01 11:13:49 +00:00
ache
0554f42f8a BLANK_SAVER syscons option added 1994-02-01 10:46:43 +00:00
ache
f8b3996fff 1) Restore removed SNAKE_SAVER (Nate, WHY you do it?) 
2) Make SNAKE_SAVER like default, if no saver specified in "options"
3) Remove #ifdef STAR_SAVER  before line /* make screensaver happy */
this code needed in any case.
 1994-02-01 10:43:02 +00:00