end for isa(4).
o Add a seperate bus frontend for acpi(4) and allow ISA DMA for
it when ISA is configured in the kernel. This allows acpi(4)
attachments in non-ISA configurations, as is possible for ia64.
o Add a seperate bus frontend for pci(4) and detect known single
port parallel cards.
o Merge PC98 specific changes under pc98/cbus into the MI driver.
The changes are minor enough for conditional compilation and
in this form invites better abstraction.
o Have ppc(4) usabled on all platforms, now that ISA specifics
are untangled enough.
o Add the scc(4) manpage to the build.
o Update the uart(4) manpage to account for scc(4).
o Update the uart(4) module build to include support for scc(4).
branch:
Integrate audit.c to audit_worker.c, so as to migrate the worker
thread implementation to its own .c file.
Populate audit_worker.c using parts now removed from audit.c:
- Move audit rotation global variables.
- Move audit_record_write(), audit_worker_rotate(),
audit_worker_drain(), audit_worker(), audit_rotate_vnode().
- Create audit_worker_init() from relevant parts of audit_init(),
which now calls this routine.
- Recreate audit_free(), which wraps uma_zfree() so that
audit_record_zone can be static to audit.c.
- Unstaticize various types and variables relating to the audit
record queue so that audit_worker can get to them. We may want
to wrap these in accessor methods at some point.
- Move AUDIT_PRINTF() to audit_private.h.
Addition of audit_worker.c to kernel configuration, missed in
earlier submit.
Obtained from: TrustedBSD Project
enabled by default in NETSMB and smbfs.ko.
With the most of modern SMB providers requiring encryption by
default, there is little sense left in keeping the crypto part
of NETSMB optional at the build time.
This will also return smbfs.ko to its former properties users
are rather accustomed to.
Discussed with: freebsd-stable, re (scottl)
Not objected by: bp, tjr (silence)
MFC after: 5 days
generations of 802.11abg chipsets from Ralink Technology.
Get rid of the pccard front-end while I'm here since all adapters are
cardbus ones.
Obtained from: OpenBSD
into a separate module. Accordingly, convert the option into a device
named similarly.
Note for MFC: Perhaps the option should stay in RELENG_6 for POLA reasons.
Suggested by: scottl
Reviewed by: cokane
MFC after: 5 days
miibus (like today). If you want a subset, choose device mii and zero
or more phy to include. We always include unkphy. We make use of
the | functionality that ruslan recently added to config.
This allowed me to trim 57k from my KB9202 kernel.
applications to insert a "tee" in the live audit event stream. Records
are inserted into a per-clone queue so that user processes can pull
discreet records out of the queue. Unlike delivery to disk, audit pipes
are "lossy", dropping records in low memory conditions or when the
process falls behind real-time events. This mechanism is appropriate
for use by live monitoring systems, host-based intrusion detection, etc,
and avoids applications having to dig through active on-disk trails that
are owned by the audit daemon.
Obtained from: TrustedBSD Project
option. We always build audit_syscalls.c so that the system call
stubs can return ENOSYS rather than the system call code
generating SIGSYS for the system calls. We are not yet ready to
add AUDIT to LINT, as the prototypes for system call arguments
won't be there until after the system calls for audit are added.
Much work from: wsalamon
Obtained from: TrustedBSD Project
and signifincantly improve the readability of ip_input() and
ip_output() again.
The resulting IPSEC hooks in ip_input() and ip_output() may be
used later on for making IPSEC loadable.
This move is mostly mechanical and should preserve current IPSEC
behaviour as-is. Nothing shall prevent improvements in the way
IPSEC interacts with the IPv4 stack.
Discussed with: bz, gnn, rwatson; (earlier version)
in order to support the on-board LANCE in Ultra 1 and to the MI NOTES as
it should work just fine with the AMD PCnet family of chips on all archs
but is not yet meant to replace lnc(4). If a kernel includes all of le(4),
lnc(4) and pcn(4) precedence is given to lnc(4)/pcn(4) for now.
It detects both: buffer underflows and buffer overflows bugs at runtime
(on free(9) and realloc(9)) and prints backtraces from where memory was
allocated and from where it was freed.
Tested by: kris
specially crafted module. There are several handrolled sollutions to this
problem in the tree already which will be replaced with this. They include
iwi(4), ipw(4), ispfw(4) and digi(4).
No objection from: arch
MFC after: 2 weeks
X-MFC after: some drivers have been converted
implementation is by no means perfect as far as some of the algorithms
that it uses and the fact that it is missing some functionality (try
locks and upgrades/downgrades are not there yet), however it does seem
to work in my local testing. There is more detail in the comments in the
code, but the short version follows.
A reader/writer lock is very much like a regular mutex: it cannot be held
across a voluntary sleep; it can be acquired in an interrupt thread; if
the lock is held by a writer then the priority of any threads that block
on the lock will be lent to the owner; the simple case lock operations all
are done in a single atomic op. It also shares some similiarities
with sx locks: it supports reader/writer semantics (multiple readers,
but single writers); readers are allowed to recurse, but writers are not.
We can extend this implementation further by either improving algorithms
or adding new functionality, but this should at least give us a base to
work with now.
Reviewed by: arch (in theory)
Tested on: i386 (4 cpu box with a kernel module that used 4 threads
that randomly chose between read locks and write locks
that ran w/o panicing for over a day solid. It usually
panic'd within a few seconds when there were bugs during
testing. :) The kernel module source is available on
request.)
It should play nicely with the existing BSD ptys.
By default, the system will use the BSD ptys, one can set the sysctl
kern.pts.enable to 1 to make it use the new pts system.
The max number of pty that can be allocated on a system can be changed with the
sysctl kern.pts.max. It defaults to 1000, and can be increased, but it is not
recommanded, as any pty with a number > 999 won't be handled by whatever uses
utmp(5).
Linux LSI MegaRaid tools can run on FreeBSD until Linux emulation.
Add in the Linux IOCTL shim and create the megadev0 device so
Linux LSI MegaRaid tools can run on FreeBSD until Linux emulation.
Add glue to build the modules but don't tie it into the build
yet until I test it from the CVS repo. via the mirror on an
amd64 machine.
Tie this into the Linux32 emulation on amd64 so the tools can
run on amd64 kernel.
Cleaned up by: ps (amr_linux.c)
lock_obj objects:
- Add new lock_init() and lock_destroy() functions to setup and teardown
lock_object objects including KTR logging and registering with WITNESS.
- Move all the handling of LO_INITIALIZED out of witness and the various
lock init functions into lock_init() and lock_destroy().
- Remove the constants for static indices into the lock_classes[] array
and change the code outside of subr_lock.c to use LOCK_CLASS to compare
against a known lock class.
- Move the 'show lock' ddb function and lock_classes[] array out of
kern_mutex.c over to subr_lock.c.
to COMPAT_43TTY.
Add COMPAT_43TTY to NOTES and */conf/GENERIC
Compile tty_compat.c only under the new option.
Spit out
#warning "Old BSD tty API used, please upgrade."
if ioctl_compat.h gets #included from userland.
as a bus so that other drivers such as drm(4), acpi_video(4), and agp(4)
can attach to it thus allowing multiple drivers for the same device. It
also removes the need for the drmsub hack for the i8[13]0/i915 drm and agp
drivers.
duplicated anyways) and into a single MI driver. Extend the driver a bit
to implement the bus and PCI kobj interfaces such that other drivers can
attach to it and transparently act as if their parent device is the PCI
bus (for the most part).
Use the following kernel configuration option to enable:
options BPF_JITTER
If you want to use bpf_filter() instead (e. g., debugging), do:
sysctl net.bpf.jitter.enable=0
to turn it off.
Currently BIOCSETWF and bpf_mtap2() are unsupported, and bpf_mtap() is
partially supported because 1) no need, 2) avoid expensive m_copydata(9).
Obtained from: WinPcap 3.1 (for i386)
- S3 Savage driver ported.
- Added support for ATI_fragment_shader registers for r200.
- Improved r300 support, needed for latest r300 DRI driver.
- (possibly) r300 PCIE support, needs X.Org server from CVS.
- Added support for PCI Matrox cards.
- Software fallbacks fixed for Rage 128, which used to render badly or hang.
- Some issues reported by WITNESS are fixed.
- i915 module Makefile added, as the driver may now be working, but is untested.
- Added scripts for copying and preprocessing DRM CVS for inclusion in the
kernel. Thanks to Daniel Stone for getting me started on that.
on powerpc (more or less...). That way people updating from FreeBSD 5 to
FreeBSD 6 and beyond on sparc64 will get an error from config(8) rather
than a mysterious compile error when they have a stale 'device zs' in
their kernel config file.
MFC after: 2 weeks
include ip_options.h into all files making use of IP Options functions.
From ip_input.c rev 1.306:
ip_dooptions(struct mbuf *m, int pass)
save_rte(m, option, dst)
ip_srcroute(m0)
ip_stripoptions(m, mopt)
From ip_output.c rev 1.249:
ip_insertoptions(m, opt, phlen)
ip_optcopy(ip, jp)
ip_pcbopts(struct inpcb *inp, int optname, struct mbuf *m)
No functional changes in this commit.
Discussed with: rwatson
Sponsored by: TCP/IP Optimization Fundraise 2005
