been patched so many times it was a bit of a mess. There are style,
code and man page cleanups. The following are the functional changes:
The RFC only permits the returning of 4 possible error
codes, make sure we only return these (PR 27636).
Use MAXLOGNAME to determine the longest usernames.
Add a -i flag, which returns the uid instead of the username
(this is from a PR 25787, which also contained alot of the
cleanups in this patch).
PR: 25787, 27636
Partially Submitted by: Arne.Dag.Fidjestol@idi.ntnu.no
Reviewed by: Arne.Dag.Fidjestol@idi.ntnu.no, green
MFC after: 3 weeks
With a small disk being 20GB these days, chances are pretty good that
an ailing sector will not be read while still being recoverable by
the drive.
Diskcheck daemon will read disks in the background at a low rate and
that way give the diskdrive a chance to detect and correct soft read
errors before they become hard errors.
Idea by: phk
Written by: ben
``chown -h owner symlink'' did not set the symlink's owner
if the file the symlink points to already had that owner:
# ls -l alink afile
-rw-r--r-- 1 nobody ru 0 May 31 14:14 afile
lrwxr-xr-x 1 root ru 5 May 31 14:14 alink -> afile
# ./chown -h -v nobody alink
# ls -l alink afile
-rw-r--r-- 1 nobody ru 0 May 31 14:14 afile
lrwxr-xr-x 1 root ru 5 May 31 14:14 alink -> afile
Similarly for chgrp(1) and chmod(1).
it already, their syntax is not compatible with ours. It will confuse
users. So, we have compatibility with their syntex.
Approved by: dwmalone
Obtained from: NetBSD
The PCCard daemon can hang indefinately while reading its
configuration file. If the last line of the file is a comment line
that does not end in a newline, the program goes into an infinite
loop searching for the non-existent newline.
This fix, provided by the PR, will allow files ending without a newline
to be read without hanging.
Submitted by: Crist J. Clark <cjclark@alum.mit.edu>
PR: bin/25791
"install && rm" change fits in with the new FreeBSD default of
copy instead of move for install. Changing the order of the deletion
of the spurious password files doesn't affect FreeBSD functionality,
but it's done in such a way as not to matter.
Obtained from: Christian Weisgerber <naddy@mips.inka.de>
attempting to remove nonexistant exports with MNT_DELEXPORT returns
an error; before this change it always succeeded. This caused
mountd(8) to log "can't delete exports for /whatever" warnings.
Change the error code from EINVAL to a more specific ENOENT, and
make mountd ignore this error when deleting the export list. I
could have just restored the previous behaviour of returning success,
but I think an error return is a useful diagnostic.
Reviewed by: phk
* Minor umask portability change (Christian Weisgerber <naddy@mips.inka.de>)
* Clarify default value of the "run it now" option (bmah)
* Make "run it now" $DESTDIR safe (bsd)
* Handle installation of hard links for /.profile and /.cshrc properly
when the auto-install option is selected
* Fix some more whitespace issues
This is required by symlink(7), ``Commands not traversing a file tree''
subsection, third paragraph:
: It is important to realize that this rule includes commands which may
: optionally traverse file trees, e.g. the command ``chown file'' is
: included in this rule, while the command ``chown -R file'' is not.
For chown(8) and chgrp(1), this is also is compliance with the latest
POSIX 1003.1-200x draft.
MFC after: 1 week
installed" instead of "old and new". Inspired by the somewhat
non-linear PR, which really didn't have a fix, per se.
PR: conf/27235 Roelof Osinga <roelof@eboa.com>
missing on the system. Instead of passing it by, mm was prompting...
bad mm, no cookie!
Brought to my attention by the PR, but the fix needed to be tweaked to
handle the auto-install option as well.
PR: misc/25731 Gilbert Gong <ggong@cal.alumni.berkeley.edu>
the -c option [when CONS_CLRHIST isn't defined]. This is okay since
the only time CONS_CLRHIST wouldn't be defined is when kbdcontrol is
being built in bootstrap-tools, and -c isn't needed then.
Submitted by: imp
The patch I used isn't quite the one Lars suggested, but the size
of the largest datagram you can recv isn't #defined anywhere, and
probably isn't even bounded for some protocols.
PR: 25050
Submitted by: Lars Eggert <larse@isi.edu>
forward or backward by a specified number of tracks (defaulting to 1).
Use strvisx() to display the media catalog in case it contains unprintable
characters. Sort includes. Based on two patches submitted by PR, plus
style fixes and other changes of my own.
Submitted by: Seth Kingsley <sethk@osd.bsdi.com>, Maxime Henrion <mux@qualys.com>
PR: bin/22672, bin/26962
MFC After: 1 week
Add a CAPI (hardware independent) driver i4bcapi(4) and hardware driver
iavc (4) to support active CAPI-based BRI and PRI cards (currently AVM
B1 and T1 cards) to isdn4bsd.
systems were repo-copied from sys/miscfs to sys/fs.
- Renamed the following file systems and their modules:
fdesc -> fdescfs, portal -> portalfs, union -> unionfs.
- Renamed corresponding kernel options:
FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS.
- Install header files for the above file systems.
- Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland
Makefiles.
page with *all* the permissible values.
This should really be spelt ipencap (as /etc/protocols does),
but a precedent has already been set by the ipproto array in
setkey.c.
It would be nice if /etc/protocols was parsed for the upperspec
field, but I don't do yacc/lex...
This change allows policies that only encrypt the encapsulated
packets passing between the endpoints of a gif tunnel. Setting
such a policy means that you can still talk directly (and
unencrypted) between the public IP numbers with (say) ssh.
MFC after: 1 week
The new syntax available in the config file is:
apm_battery [0-9]+(%|[Mm) (dis|)charging { ... }
The stuff in the braces is the same as the existing case. nn% checks for
a certain percentage of life remaining and nnM checks for a cerain
number of minutes remaining. Specifying "discharge" means that you're
interested in knowing when the battery reaches a certain level while AC
power is off, "charging" the opposite.
The man page needs to be updated.
The code can be fooled. If you SIGHUP the daemon and the battery level
matches a rule it will be performed once per SIGHUP. If the battery
level matches a rule and you repeatedly apply and take away AC power,
the rule will be run once per occurance. This, however, is a feature.
:-) The code also only runs when select() times out, so getting APM
events more often than the timeout interval will result in the rules not
being run. These are things that remain to be overcome.
Its main purpose is to adapt automatically to the floppy parameters
(in particular the track size for efficient reading), and to allow a
simple error recovery for CRC-errored sectors. Requires the newly
added fdc(4) options.
them.
Sysinstall used to check /var/run/ld.so.hints (aout related) and create
hints with the ldconfig command, but the ldconfig command alone will
generate elf hints only. The correct behavior is:
* If /var/run/ld-elf.so.hints does not exist, generate elf hints
* If /var/run/ld.so.hints does not exist, generate aout hints
(using ldconfig with the -aout option)
This will help ports that check for aout libraries using ldconfig in their
pkg-req scripts.
Approved by: jkh
MFC after: 1 weeks
warnx()+exit() with errx() and replace a big if..then..else construct
to determine the package download directory with a lookup table.
Reviewed by: jkh
MFC after: 2 weeks
/usr/share/syscons/keymaps. This should prevent word breakage when new keymaps
have been added.
Prompted by: Matthew D. Fuller <fullermd@over-yonder.net>
TLU event handler).
This used to be done as a side effect of SIOCAIFADDR'ing the interface,
but now that duplicate SIOCAIFADDRs are optimised out, we can't depend
on that behaviour.
and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000
copper PHY. There are a whole bunch of very low cost cards available with
this chipset selling for $150USD or less. This includes the SMC9462TX,
D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards
from Addtron.
This chip supports TCP/IP checksum offload, VLAN tagging/insertion.
2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs.
I have not done serious performance testing with this driver. I know
it works, and I want it under CVS control so I can keep tabs on it.
Note that there's no serious mutex stuff in here yet either: I need
to talk more with jhb to figure out the right way to do this. That
said, I don't think there will be any problems.
This driver should also work on the alpha. It's not turned on in
GENERIC.
