and VMware legal:
- Add a dual BSD-2 Clause/GPLv2 LICENSE file in the VMCI directory
- Remove the use of "All Rights Reserved"
- Per best practice, remove copyright/license info from Makefile
Reviewed by: imp, emaste, jhb, Vishnu Dasa <vdasa@vmware.com>
Approved by: VMware legal via Mark Peek <markpeek@vmware.com>
Differential Revision: https://reviews.freebsd.org/D14979
We intend to remove support before FreeBSD 12 is branched.
Reviewed by: imp, emaste
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14890
The ocs_fc(4) driver supports the following hardware:
Emulex 16/8G FC GEN 5 HBAS
LPe15004 FC Host Bus Adapters
LPe160XX FC Host Bus Adapters
Emulex 32/16G FC GEN 6 HBAS
LPe3100X FC Host Bus Adapters
LPe3200X FC Host Bus Adapters
The driver supports target and initiator mode, and also supports FC-Tape.
Note that the driver only currently works on little endian platforms. It
is only included in the module build for amd64 and i386, and in GENERIC
on amd64 only.
Submitted by: Ram Kishore Vegesna <ram.vegesna@broadcom.com>
Reviewed by: mav
MFC after: 5 days
Relnotes: yes
Sponsored by: Broadcom
Differential Revision: https://reviews.freebsd.org/D11423
Add a new "interleave" allocation policy which stripes pages across
domains with a stride or width keeping contiguity within a multi-page
region.
Move the kernel to the dedicated numbered cpuset #2 making it possible
to assign kernel threads and memory policy separately from user. This
also eliminates the need for the complicated interrupt binding code.
Add a sysctl API for viewing and manipulating domainsets. Refactor some
of the cpuset_t manipulation code using the generic bitset type so that
it can be used for both. This probably belongs in a dedicated subr file.
Attempt to improve the include situation.
Reviewed by: kib
Discussed with: jhb (cpuset parts)
Tested by: pho (before review feedback)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14839
For some reason, the other link - https://lists.FreeBSD.org/ - needs
the trailing slash, otherwise man(8) renders it in a weird way. No
idea why's that. At least try to be consistent. Revert it when the
other link gets fixed.
MFC after: 2 weeks
In a virtual machine, VMCI is exposed as a regular PCI device. The primary
communication mechanisms supported are a point-to-point bidirectional
transport based on a pair of memory-mapped queues, and asynchronous
notifications in the form of datagrams and doorbells. These features are
available to kernel level components such as vSockets through the VMCI
kernel API. In addition to this, the VMCI kernel API provides support for
receiving events related to the state of the VMCI communication channels,
and the virtual machine itself.
Submitted by: Vishnu Dasa <vdasa@vmware.com>
Reviewed by: bcr, imp
Obtained from: VMware
Differential Revision: https://reviews.freebsd.org/D14289
Forwarded packets passed through PFIL_OUT, which made it difficult for
firewalls to figure out if they were forwarding or producing packets. This in
turn is an issue for pf for IPv6 fragment handling: it needs to call
ip6_output() or ip6_forward() to handle the fragments. Figuring out which was
difficult (and until now, incorrect).
Having pfil distinguish the two removes an ugly piece of code from pf.
Introduce a new variant of the netpfil callbacks with a flags variable, which
has PFIL_FWD set for forwarded packets. This allows pf to reliably work out if
a packet is forwarded.
Reviewed by: ae, kevans
Differential Revision: https://reviews.freebsd.org/D13715
from jailed process. These might get implemented in jails in the
future, but for now they are not supported.
Discussed on: freebsd-security@
Reviewed by: brueffer@
MFC after: 2 weeks
altq(4) to match altq(9). This makes preserving the history section as the
author of ALTQ easier in the history section, rather than calling it a framework
in the description & a system in the history.
Add a history section to altq(4) and extend the history section in altq(9)
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D14774
ECN (ABE)" proposal to the New Reno congestion control algorithm module.
ABE reduces the amount of congestion window reduction in response to
ECN-signalled congestion relative to the loss-inferred congestion response.
More details about ABE can be found in the Internet-Draft:
https://tools.ietf.org/html/draft-ietf-tcpm-alternativebackoff-ecn
The implementation introduces four new sysctls:
- net.inet.tcp.cc.abe defaults to 0 (disabled) and can be set to non-zero to
enable ABE for ECN-enabled TCP connections.
- net.inet.tcp.cc.newreno.beta and net.inet.tcp.cc.newreno.beta_ecn set the
multiplicative window decrease factor, specified as a percentage, applied to
the congestion window in response to a loss-based or ECN-based congestion
signal respectively. They default to the values specified in the draft i.e.
beta=50 and beta_ecn=80.
- net.inet.tcp.cc.abe_frlossreduce defaults to 0 (disabled) and can be set to
non-zero to enable the use of standard beta (50% by default) when repairing
loss during an ECN-signalled congestion recovery episode. It enables a more
conservative congestion response and is provided for the purposes of
experimentation as a result of some discussion at IETF 100 in Singapore.
The values of beta and beta_ecn can also be set per-connection by way of the
TCP_CCALGOOPT TCP-level socket option and the new CC_NEWRENO_BETA or
CC_NEWRENO_BETA_ECN CC algo sub-options.
Submitted by: Tom Jones <tj@enoti.me>
Tested by: Tom Jones <tj@enoti.me>, Grenville Armitage <garmitage@swin.edu.au>
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D11616
no longer relevant (read: most of what was there) and adds some
quick links to point newcomers in the right direction.
Reviewed by: imp@
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14680
Or else disable the device. Note that the detection can be bypassed by
setting the hw.atrtc.enable option in the loader configuration file.
More information can be found on atrtc(4).
Sponsored by: Citrix Systems R&D
Reviewed by: ian
Differential revision: https://reviews.freebsd.org/D14399
Remove how to format K&R stuff. The project hasn't been using it in
new code for a long time. It's so obsolete, we don't need a statement
to never use it. Add a statement requesting that comments about
parameters be preserved when converting to ASNI style, per Kirk.
Differential Revision: https://reviews.freebsd.org/D14051
ConnectX-4/5 devices in mlx5core.
The dump is obtained by reading a predefined register map from the
non-destructive crspace, accessible by the vendor-specific PCIe
capability (VSC). The dump is stored in preallocated kernel memory and
managed by the mlx5tool(8), which communicates with the driver using a
character device node.
The utility allows to store the dump in format
<address> <value>
into a file, to reset the dump content, and to manually initiate the
dump.
A call to mlx5_fwdump() should be added at the places where a dump
must be fetched automatically. The most likely place is right before a
firmware reset request.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies
According with /etc/rc.initdiskless the default mfs allocation
is now 5Mb (10240 x 512 bytes sectors)
Submitted by: rodrigo
Reviewed by: bcr
Approved by: manpages (bcr)
Differential Revision: https://reviews.freebsd.org/D14592
- Add fdt_pinctrl(4) with general information for the driver
- Add fdt_pinctrl(9) with fdt_pinctrl KPI description
Reviewed by: ian, manu, wblock
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14235
imcsmb(4) provides smbus(4) support for the SMBus controller functionality
in the integrated Memory Controllers (iMCs) embedded in Intel Sandybridge-
Xeon, Ivybridge-Xeon, Haswell-Xeon, and Broadwell-Xeon CPUs. Each CPU
implements one or more iMCs, depending on the number of cores; each iMC
implements two SMBus controllers (iMC-SMBs).
*** IMPORTANT NOTE ***
Because motherboard firmware or the BMC might try to use the iMC-SMBs for
monitoring DIMM temperatures and/or managing an NVDIMM, the driver might
need to temporarily disable those functions, or take a hardware interlock,
before using the iMC-SMBs. Details on how to do this may vary from board to
board, and the procedure may be proprietary. It is strongly suggested that
anyone wishing to use this driver contact their motherboard vendor, and
modify the driver as described in the manual page and in the driver itself.
(For what it's worth, the driver as-is has been tested on various SuperMicro
motherboards.)
Reviewed by: avg, jhb
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14447
Discussed with: avg, ian, jhb
Tested by: allanjude (previous version), Panasas
