altq(4) to match altq(9). This makes preserving the history section as the
author of ALTQ easier in the history section, rather than calling it a framework
in the description & a system in the history.
Add a history section to altq(4) and extend the history section in altq(9)
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D14774
This is originally based on a patch from David Chisnall for soft-float
N64 but has since been updated to support O32, N32, and hard-float ABIs.
The soft-float O32, N32, and N64 support has been committed upstream.
The hard-float changes are still in review upstream.
Enable LLVM_LIBUNWIND on mips when building with a suitable (C+11-capable)
toolchain. This has been tested with external GCC for all ABIs and
O32 and N64 with clang.
Reviewed by: emaste
Obtained from: CheriBSD (original N64 patch)
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D14701
ECN (ABE)" proposal to the New Reno congestion control algorithm module.
ABE reduces the amount of congestion window reduction in response to
ECN-signalled congestion relative to the loss-inferred congestion response.
More details about ABE can be found in the Internet-Draft:
https://tools.ietf.org/html/draft-ietf-tcpm-alternativebackoff-ecn
The implementation introduces four new sysctls:
- net.inet.tcp.cc.abe defaults to 0 (disabled) and can be set to non-zero to
enable ABE for ECN-enabled TCP connections.
- net.inet.tcp.cc.newreno.beta and net.inet.tcp.cc.newreno.beta_ecn set the
multiplicative window decrease factor, specified as a percentage, applied to
the congestion window in response to a loss-based or ECN-based congestion
signal respectively. They default to the values specified in the draft i.e.
beta=50 and beta_ecn=80.
- net.inet.tcp.cc.abe_frlossreduce defaults to 0 (disabled) and can be set to
non-zero to enable the use of standard beta (50% by default) when repairing
loss during an ECN-signalled congestion recovery episode. It enables a more
conservative congestion response and is provided for the purposes of
experimentation as a result of some discussion at IETF 100 in Singapore.
The values of beta and beta_ecn can also be set per-connection by way of the
TCP_CCALGOOPT TCP-level socket option and the new CC_NEWRENO_BETA or
CC_NEWRENO_BETA_ECN CC algo sub-options.
Submitted by: Tom Jones <tj@enoti.me>
Tested by: Tom Jones <tj@enoti.me>, Grenville Armitage <garmitage@swin.edu.au>
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D11616
no longer relevant (read: most of what was there) and adds some
quick links to point newcomers in the right direction.
Reviewed by: imp@
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14680
Or else disable the device. Note that the detection can be bypassed by
setting the hw.atrtc.enable option in the loader configuration file.
More information can be found on atrtc(4).
Sponsored by: Citrix Systems R&D
Reviewed by: ian
Differential revision: https://reviews.freebsd.org/D14399
Remove how to format K&R stuff. The project hasn't been using it in
new code for a long time. It's so obsolete, we don't need a statement
to never use it. Add a statement requesting that comments about
parameters be preserved when converting to ASNI style, per Kirk.
Differential Revision: https://reviews.freebsd.org/D14051
ConnectX-4/5 devices in mlx5core.
The dump is obtained by reading a predefined register map from the
non-destructive crspace, accessible by the vendor-specific PCIe
capability (VSC). The dump is stored in preallocated kernel memory and
managed by the mlx5tool(8), which communicates with the driver using a
character device node.
The utility allows to store the dump in format
<address> <value>
into a file, to reset the dump content, and to manually initiate the
dump.
A call to mlx5_fwdump() should be added at the places where a dump
must be fetched automatically. The most likely place is right before a
firmware reset request.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies
LLD is a cross toolchain component. It shouldn't be built when
requesting a build without building a cross compiler.
(CROSS_COMPILER is somewhat unfortunately named; in any case, lld
should be treated as GNU binutils here.)
Submitted by: Dan McGregor <dan.mcgregor at usask.ca>
MFC after: 1 week
According with /etc/rc.initdiskless the default mfs allocation
is now 5Mb (10240 x 512 bytes sectors)
Submitted by: rodrigo
Reviewed by: bcr
Approved by: manpages (bcr)
Differential Revision: https://reviews.freebsd.org/D14592
A sub-make, such as in 'make buildworld', may want to override MAKEOBJDIRPREFIX
but is unable to do so if src-env.conf is forcing it to another value. Without
using '?=' the sub-make may use the wrong .OBJDIR.
Reported by: eadler
Sponsored by: Dell EMC
- Add fdt_pinctrl(4) with general information for the driver
- Add fdt_pinctrl(9) with fdt_pinctrl KPI description
Reviewed by: ian, manu, wblock
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14235
imcsmb(4) provides smbus(4) support for the SMBus controller functionality
in the integrated Memory Controllers (iMCs) embedded in Intel Sandybridge-
Xeon, Ivybridge-Xeon, Haswell-Xeon, and Broadwell-Xeon CPUs. Each CPU
implements one or more iMCs, depending on the number of cores; each iMC
implements two SMBus controllers (iMC-SMBs).
*** IMPORTANT NOTE ***
Because motherboard firmware or the BMC might try to use the iMC-SMBs for
monitoring DIMM temperatures and/or managing an NVDIMM, the driver might
need to temporarily disable those functions, or take a hardware interlock,
before using the iMC-SMBs. Details on how to do this may vary from board to
board, and the procedure may be proprietary. It is strongly suggested that
anyone wishing to use this driver contact their motherboard vendor, and
modify the driver as described in the manual page and in the driver itself.
(For what it's worth, the driver as-is has been tested on various SuperMicro
motherboards.)
Reviewed by: avg, jhb
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14447
Discussed with: avg, ian, jhb
Tested by: allanjude (previous version), Panasas
Makefile.${MACHINE_ARCH} and remove the now-empty files. Generate the
*32 directories on the necessary architectures (well, currently only
amd64) on the fly. Remove LOADER_EFI variable and co-locate it with
EFI.
Differential Review: https://reviews.freebsd.org/D14546
camelCase tends to be preferred for function identifiers, while
internal_underscores are preferred for variable identifiers. This convention
makes it a little bit easier to eyeball whether variable/function usage is
correct.
The optional commas for final table values are preferred to reduce chances
for error.
