In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
and owner_group strings that consist entirely of
digits, interpreting them as the uid/gid number.
This change was needed since new (>= 3.3) Linux
servers reply with these strings by default.
This change is mandated by the rfc3530bis draft.
Reported on freebsd-stable@ under the Subject
heading "Problem with Linux >= 3.3 as NFSv4 server"
by Norbert Aschendorff on Aug. 20, 2012.
Tested by: norbert.aschendorff at yahoo.de
Reviewed by: jhb
MFC after: 2 weeks
Use it for a printf() that can be harmlessly generated for mmap()'d
files. It will be used extensively for the NFSv4.1 client.
Debugging printf()s are enabled by setting vfs.nfs.debuglevel to
a non-zero value. The higher the value, the more debugging printf()s.
Reviewed by: jhb
MFC after: 2 weeks
to freebsd-fs@, where the setfacl of an NFSv4 acl would fail.
This was caused by the VOP_ACLCHECK() call for ZFS replying
EOPNOTSUPP. After discussion with rwatson@, it was determined
that a call to VOP_ACLCHECK() before doing VOP_SETACL() is not
required. This patch fixes the problem by deleting the
VOP_ACLCHECK() call.
Tested by: Andrew Leonard (previous version)
MFC after: 1 week
subject "Data corruption over NFS in -current". During investigation
of this, I came across an ugly bogusity in the new NFS client where
it replaced the cr_uid with the one used for the mount. This was
done so that "system operations" like the NFSv4 Renew would be
performed as the user that did the mount. However, if any other
thread shares the credential with the one doing this operation,
it could do an RPC (or just about anything else) as the wrong cr_uid.
This patch fixes the above, by using the mount credentials instead of
the one provided as an argument for this case. It appears
to have fixed Martin's problem.
This patch is needed for NFSv4 mounts and NFSv3 mounts against
some non-FreeBSD servers that do not put post operation attributes
in the NFSv3 Statfs RPC reply.
Tested by: Martin Cracauer (cracauer at cons.org)
Reviewed by: jhb
MFC after: 2 weeks
would go negative after using the "-z" option to zero out the stats.
This patch fixes that by not zeroing out the srvcache_size field
for "-z", since it is the size of the cache and not a counter.
MFC after: 2 weeks
The effect of this was, for clients mounted via inet6 addresses,
that the DRC cache would never have a hit in the server. It also
broke NFSv4 callbacks when an inet6 address was the only one available
in the client. This patch fixes the above, plus deletes opt_inet6.h
from a couple of files it is not needed for.
MFC after: 2 weeks
It seems strchr() and strrchr() are used more often than index() and
rindex(). Therefore, simply migrate all kernel code to use it.
For the XFS code, remove an empty line to make the code identical to
the code in the Linux kernel.
get a reply of EEXIST from an NFS server when a Mkdir RPC was retried,
for an NFS over UDP mount.
Upon investigation, it was found that the client was retransmitting
the Mkdir RPC request over UDP, but with a different xid. As such,
the retransmitted message would miss the Duplicate Request Cache
in the server, causing it to reply EEXIST. The kernel client side
UDP rpc code has two timers. The first one causes a retransmit using
the same xid and socket and was set to a fixed value of 3seconds.
(The default can be overridden via CLSET_RETRY_TIMEOUT.)
The second one creates a new socket and xid and should be larger
than the first. However, both NFS clients were setting the second
timer to nm_timeo ("timeout=<value>" mount argument), which defaulted to
1second, so the first timer would never time out.
This patch fixes both NFS clients so that they set the first timer
using nm_timeo and makes the second timer larger than the first one.
Reported by: jwd
Tested by: jwd
Reviewed by: jhb
MFC after: 2 weeks
of the same lock_owner4 string. As such, the handling of cleanup
of lock_owners could be simplified. This simplification permitted
the client to do a ReleaseLockOwner operation when the process that
the lock_owner4 string represents, has exited. This permits the
server to release any storage related to the lock_owner4 string
before the associated open is closed. Without this change, it
is possible to exhaust a server's storage when a long running
process opens a file and then many child processes do locking
on the file, because the open doesn't get closed. A similar patch
was applied to the Linux NFSv4 client recently so that it wouldn't
exhaust a server's storage.
Reviewed by: zack
MFC after: 2 weeks
client. This does not change the client's behaviour, but prepares
the code so that nfsrpc_rellockown() can be called elsewhere in a
future commit.
MFC after: 2 weeks
head nfsc_defunctlockowner. This patch simply removes the code that
loops through this always empty list, since the code no longer does
anything useful. It should not have any effect on the client's
behaviour.
MFC after: 2 weeks
for the remove and rename operations. Some NFSv4 servers will
report NFSERR_GRACE for these operations. This patch changes
the behaviour of the client so that it handles NFSERR_GRACE
like NFSERR_DELAY for non-state related operations like
remove and rename. It also exempts the delegreturn operation
from handling within newnfs_request() for NFSERR_DELAY/NFSERR_GRACE
so that it can handle NFSERR_GRACE in the same manner as before.
This problem was resolved thanks to discussion with bfields at fieldses.org.
The problem was identified at the recent NFSv4 ineroperability
bakeathon.
MFC after: 2 weeks
Isilon has the concept of an in-memory exit-code ring that saves the last exit
code of a function and allows for stack tracing. This is very helpful when
debugging tough issues.
This patch is essentially a no-op for BSD at this point, until we upstream
the dexitcode logic itself. The patch adds DEXITCODE calls to every NFS
function that returns an errno error code. A number of code paths were also
reorganized to have single exit paths, to reduce code duplication.
Submitted by: David Kwan <dkwan@isilon.com>
Reviewed by: rmacklem
Approved by: zml (mentor)
MFC after: 2 weeks
to the lock_owner4 string that goes on the wire. Also, add
code to do a ReleaseLockOwner Op on the lock_owner4 string
before a Close. Apparently not all NFSv4 servers handle multiple
instances of the same lock_owner4 string, at least not in a
compatible way. This patch avoids having multiple instances,
except for one unusual case, which will be fixed by a future commit.
Found at the recent NFSv4 interoperability Bakeathon.
Tested by: tdh at excfb.com
MFC after: 2 weeks
mode attribute in as 0 when doing writes. The change adds
the Mode attribute plus the others except Owner and Owner_group
to the list requested by the NFSv4 Write Operation. This fixed
a problem where an executable file built by "cc" would get mode
0111 instead of 0755 for some NFSv4 servers.
Found at the recent NFSv4 interoperability Bakeathon.
Tested by: tdh at excfb.com
MFC after: 2 weeks
server replied NFS3ERR_JUKEBOX/NFS4ERR_DELAY to an rpc.
This affected both NFSv3 and NFSv4. Found during testing
at the recent NFSv4 interoperability Bakeathon.
MFC after: 2 weeks
was used for doing a mount when performing system operations
on AUTH_SYS mounts. This resolved an issue when mounting
a Linux server. Found during testing at the recent
NFSv4 interoperability Bakeathon.
MFC after: 2 weeks
the NFS subsystems use five of the rpcsec_gss/kgssapi entry points,
but since it was not obvious which others might be useful, all
nineteen were included. Basically the nineteen entry points are
set in a structure called rpc_gss_entries and inline functions
defined in sys/rpc/rpcsec_gss.h check for the entry points being
non-NULL and then call them. A default value is returned otherwise.
Requested by rwatson.
Reviewed by: jhb
MFC after: 2 weeks
cloned from the old NFS client, plus additions for NFSv4. A
review of this code is in progress, however it was felt by the
reviewer that it could go in now, before code slush. Any changes
required by the review can be committed as bug fixes later.
"p_leader" for the "id" for POSIX byte range locking. I think
this would only have affected processes created by rfork(2)
with the RFTHREAD flag specified. This patch fixes that by
passing the "id" down through the various functions from
nfs_advlock().
MFC after: 2 weeks
correctly during a forced dismount. This required that
the exclusive and shared (refcnt) sleep lock functions check
for MNTK_UMOUNTF before sleeping, so that they won't block
while nfscl_umount() is getting rid of the state. As
such, a "struct mount *" argument was added to the locking
functions. I believe the only remaining case where a forced
dismount can get hung in the kernel is when a thread is
already attempting to do a TCP connect to a dead server
when the krpc client structure called nr_client is NULL.
This will only happen just after a "mount -u" with options
that force a new TCP connection is done, so it shouldn't
be a problem in practice.
MFC after: 2 weeks
argument for a write RPC when it succeeds for the first one and
fails for a subsequent RPC within the same call to the function.
This makes it compatible with the old NFS client for this case.
MFC after: 2 weeks
values of error numbers in sys/errno.h will be the same
as the ones specified by the NFS RFCs and that the code
needs to be fixed if error numbers are changed in sys/errno.h.
Suggested by: Peter Jeremy
MFC after: 2 weeks
same diskless NFS root code as the regular client, which
was moved to sys/nfs by r221032. This fixes the newnfs
client so that it can do an NFSv3 diskless root file system.
MFC after: 2 weeks
"struct nfs_args" as the regular NFS client. This is needed
so that the old mount(2) syscall will work and it makes
sharing of the diskless NFS root code easier. Eary in the
porting exercise I introduced a new revision of nfs_args, but
didn't actually need it, thanks to nmount(2). I re-introduced the
NFSMNT_KERB flag, since it does essentially the same thing and
the old one would not have been used because it never worked.
I also added a few new NFSMNT_xxx flags to sys/nfsclient/nfs_args.h
that are used by the experimental NFS client.
MFC after: 2 weeks
message that was generated when doing experimental NFS client
mounts. I put that message in because the krpc would hang with
the default size for mounts that used large rsize/wsize values.
Since the bug that caused these hangs was fixed by r213756,
I think the message is no longer needed.
MFC after: 2 weeks
same as the regular NFS client for NFSv3. The main one is making
use of a reserved port# the default. Also, set the retry limit
for TCP the same and fix the code so that it doesn't disable
readdirplus for NFSv4.
MFC after: 2 weeks
threads in the same manner as the regular NFS client after
r214026 was committed. This resolves the lors fixed by r214026
and its predecessors for the regular client.
Reviewed by: jhb
MFC after: 2 weeks
to determine if a file system supports NFSv4 ACLs. Since
VOP_PATHCONF() must be called with a locked vnode, the function
is called before nfsvno_fillattr() and the result is passed in
as an extra argument.
MFC after: 2 weeks
crossing of server mount points properly. The functions
nfsvno_fillattr() and nfsv4_fillattr() were modified to
take the extra arguments that are the mount point, a flag
to indicate that it is a file system root and the mounted
on fileno. The mount point argument needs to be busy when
nfsvno_fillattr() is called, since the vp argument is not
locked.
Reviewed by: kib
MFC after: 2 weeks
the experimental NFS server, so that it doesn't leak memory
when unloaded. However, unloading the NFSv4 server is not
recommended, since all NFSv4 state will be lost by the unload
and clients will have to recover the state after a server
reload/restart as if the server crashed/rebooted.
MFC after: 2 weeks
