Beauty correction for verbose mode or in case we print multiple key
information to not continue with the next options directly after
as we did so far, e.g.:
AES-CCM 2:128-bit
AES-CCM 3:128-bit powersavemode ...
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: adrian
Differential Revision: https://reviews.freebsd.org/D29393
If multiple threads are invoking "ifconfig XXX create" a race may occur
which can lead to two different error messages for the same error.
a) ifconfig: SIOCIFCREATE2: File exists
b) ifconfig: interface XXX already exists
This patch ensures ifconfig prints the same error code
for the same case.
Reviewed by: imp@ and kib@
Differential Revision: https://reviews.freebsd.org/D27380
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
802.1ad interfaces are created with ifconfig using the "vlanproto" parameter.
Eg., the following creates a 802.1Q VLAN (id #42) over a 802.1ad S-VLAN
(id #5) over a physical Ethernet interface (em0).
ifconfig vlan5 create vlandev em0 vlan 5 vlanproto 802.1ad up
ifconfig vlan42 create vlandev vlan5 vlan 42 inet 10.5.42.1/24
VLAN_MTU, VLAN_HWCSUM and VLAN_TSO capabilities should be properly
supported. VLAN_HWTAGGING is only partially supported, as there is
currently no IFCAP_VLAN_* denoting the possibility to set the VLAN
EtherType to anything else than 0x8100 (802.1ad uses 0x88A8).
Submitted by: Olivier Piras
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D26436
Implement two macros IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160MHZ()
and its 80+80 counter part to check in vhtcaps for appropriate
levels of support and use the macros throughout the code.
Add vht160_chan_ranges/is_vht160_valid_freq and handle analogue
to vht80 in various parts of the code.
Add ieee80211_add_channel_cbw() which also takes the CBW flag
fields and make the former ieee80211_add_channel() a wrapper to it.
With the CBW flags we can add HT/VHT channels passing them to
getflags() for the 2/5ghz functions.
In ifconfig(8) add the regdomain_addchans() support for VHT160
and VHT80P80.
With this (+ regdoain.xml updates) VHT160 channels can be
configured, listed, and pass regdomain where appropriate.
Tested with: iwlwifi
Reviewed by: adrian
MFC after: 10 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26712
As we did in the kernel in r366112 replace the MS() macro with the version(s)
added to the kernel: _IEEE80211_MASKSHIFT(). Also provide its counter part.
This will later allow use to use other macros defined in net80211 headers
here in ifconfig.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Sort a few VHT160 and 80+80 lines, update some comments, and remove
a superfluous ','.
No functional changes intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
For flags and checks the order goes VHT160 and then VHT80P80 unless
checks are in reverse order ("more comes first") in which case we
deal with VHT80P80 first.
The one reverse order to pick out is where we check channel
prefernences. While it may seem that VHT160 is better, finding
two "free" channels (VHT 80+80) is more likely so we do prefer that.
While dealing with VHT160 and VHT80P80 add extra clauses previously
missing or marked TODO in a few places.
Reviewed by: adrian, gnn
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26002
The standard uses 80+80 and 80p80 but nowhere 80_80.
Switch the latter to 80P80 for all the macros and comments refering
to #defined flags which I could find.
The only place we leave as 80p80 is the ifconfig command line arguments
as we spell them all in lower case.
Ideally we would use 80+80 for any interactions with the user and
80P80 for anything internal but let us not confuse parsers and
hence avoid the '+' in either case.
Reviewed by: adrian, gnn
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26001
Rather then using magic numbers duplicate IEEE80211_FVHT_VHT* in
ifconfig (cleanup of these and other flags used and not exposed by
net80211 should happen later) and use those.
In the kernel this simplifies one ioctl path (the other one currently
relies on individual bit flags being passed in).
We also re-order the 80P80 and 160 flag for 160 to come before 80+80
and more clearly leave the flags as TODO in one of the 160/80+80 cases.
Reviewed by: adrian
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26000
Add IEEE80211_IOC_IC_NAME to query the ic_name field and in ifconfig
to print the parent interface again. This functionality was lost
around r287197. It helps in case of multiple wlan interfaces and
multiple underlying hardware devices to keep track which wlan
interface belongs to which physical device.
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Reviewed by: adrian, Idwer Vollering
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25832
For 11n / 11ac we are still using non-11n rates for management and
multicast traffic by default; check 'MCS rate' bit to determine how
to print them correctly.
PR: 161035
MFC after: 1 week
Regardless if a verbose scan is required or not, we'd still want to display the
full SSID name by default so use the IEE80211_NWID_LEN constant to set the
value to use instead.
Tested on rene@'s laptop.
Reviewed by: kp
Sponsored by: Essen Hackathon
Differential Revision: https://reviews.freebsd.org/D16566
Currently ifconfig(8) only prints the hex representation of ssid names
with non-ASCII characters. Many modern terminals are able to properly render
non-ASCII characters. This change checks if the terminal charmap is UTF-8,
and if so, will render the characters, rather than the hex value.
This behavior is circumvented by running ifconfig(8) in a non-UTF8 locale;
e.g. C or POSIX.
It was pointed out by kp@ during the review that APs have the option to
broadcast whether their SSIDs may be interpreted as UTF-8. Ideally, we would
honor this and only attempt this behavior if it's so-broadcasted by the AP.
However, a sample survey showed that hostapd will advertise this if
indicated in config but it doesn't seem to be so common in the AP market, so
this would be effectively useless as we'll rarely know if the SSID should be
renderable as UTF-8.
Despite this, it was decided to be OK with this anyways- there's a
straightforward path to doing it the right way based on advertisement by AP
if we need to go that route, and one can revert to old behavior easily
enough at runtime if we get it wrong.
Submitted by: Farhan Khan <khanzf@gmail.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D15922
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Some APs broadcast WPS IE frames with totally broken data. Ifconfig's printwpsie()
loops through WPS frames printing the attributes out; if the frame's data is bad,
printwpsie() can end up looking at out-of-bounds addresses causing ifconfig to
bus error.
Thanks to Takashi Inoue at Nihon U for his efforts in debugging this.
PR: bin/217312
Submitted by: fbsd@opal.com
MFC after: 1 week
* Migrate the rx_params stuff out from ieee80211_freebsd.h where it doesn't belong -
this isn't freebsd specific anymore.
* Don't use a hard-coded number of chains in the ioctl header; now we can shuffle
MAX_CHAINS around so it can be used in the right spot.
* Extend the signal/noisefloor levels in the mimo stats struct to userland to include
the signal and noisefloor levels for each 20MHz slice of a 160MHz channel.
* Bump the number of EVM pilots in preparation for 4x4 and 160MHz channels.
Tested:
* ath(4), STA mode
* iwn(4), STA mode
* local ath10k port, STA mode
TODO:
* 11ax chips will come with 5GHz 8x8 hardware for lots of MU-MIMO - I'll re-bump it
at that point.
Note:
* This breaks the driver and ifconfig ABI; please recompile the kernel,
ifconfig and wpa_supplicant/hostapd.
This is very preliminary and mostly enough for me (with other patches)
to work on VHT support.
It adds:
* VHT20, VHT40 and VHT80 regulatory/band awareness
* VHT20, VHT40 and VHT80 channel configuration / population
* Parses vht channel specifications (eg ifconfig wlan0 create wlandev athp0 wlanmode monitor channel 36:vht/80)
* Configuration of VHT, VHT40, VHT80, VHT80+80, VHT160 channel
width (IEEE80211_FVHT_VHT* flags in net80211)
TODO:
* No VHT80+80 or VHT160 channels yet - I don't yet have hardware, and I'm
not yet sure how to support/populate VHT80+80 channels.
* No, I won't update the manpage until this is "more done", lest someone
tries using vht and gets upset with me.
* No, I won't commit the regulatory database I'm testing with, so you'll
just end up with no VHT channels ever populated. Which is good, as there
isn't an 11ac driver in-tree yet to try it with.
Change default regulatory domain from DEBUG (no limitations;
exposes all device channels) to FCC; as a result, newly created wireless
interface with default settings will have less chances to violate
country-specific regulations.
This change will not affect drivers with pre-initialized regdomain
structure (currentry ath(4) and mwl(4)); in that case, the default
channel list must correspond to the default regdomain / country setting.
You can switch to another regdomain / country via corresponding
ifconfig(8) options; the driver must implement ic_getradiocaps()
method to restore full channel list.
Full country / regdomain list may be obtained via
'ifconfig <iface> list countries' command.
Example: change country to Germany:
ifconfig wlan0 down # all wlans on the device must be down
ifconfig wlan0 country DE
ifconfig wlan0 up
# wpa_supplicant(8), dhclient(8) etc
At the creation time:
ifconfig wlan0 create wlandev wpi0 country DE
To make changes permanent add the following line to the rc.conf(5):
create_args_wlan0="country DE"
Tested with
- Intel 3945BG (wpi(4)).
- WUSB54GC (rum(4)).
Reviewed by: adrian
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D6228
that it is NUL terminated. Additional NUL padding is not required
for short names.
Use sizeof(destination) in a few places instead of IFNAMSIZ.
Cast afp->af_ridreq and afp->af_addreq to make the intent of
the code more obvious.
Reported by: Coverity
CID: 1009628, 1009630, 1009631, 1009632, 1009633, 1009635, 1009638
CID: 1009639, 1009640, 1009641, 1009642, 1009643, 1009644, 1009645
CID: 1009646, 1009647, 1010049, 1010050, 1010051, 1010052, 1010053
CID: 1010054, 1011293, 1011294, 1011295, 1011296, 1011297, 1011298
CID: 1011299, 1305821, 1351720, 1351721
MFC after: 1 week
Do not use 20 MHz channel list while checking 40 MHz channels;
it may be different. Just use the corresponding list instead.
Tested by: Masachika ISHIZUKA <ish@amail.plala.or.jp>
PR: 209328
This adds the ability to view and configure the STBC parameter for
both transmit and receive.
Whilst here, fix a typo for AMSDU.
TODO:
* manpage update
ic_nchans, from struct:ieee80211req_chaninfo, is an unsigned int.
Use an unsigned index to prevent overflowing the index.
Adopt unsigned integers in other cases where it is useful
to be aware of the unsigned quantities and there is no
risk of the values being negative.
MFC after: 1 week
This displays the IE names in ifconfig but it doesn't yet decode things.
Submitted by: Idwer Vollering <vidwer@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3782
* remove regdomain.[ch] - it's now part of lib80211.
* convert ifieee80211.c to use the ioctl routines in lib80211 and
implement the "error? exit" wrapper behaviour the callers expect.
