vm_mmap_vnode function, where we can safely check for a special /dev/zero
case. Rev. 1.180 has reordered checks and introduced a regression.
Submitted by: alc
Was broken by: kan
to mmap it PROT_EXEC. This also depends on the architecture, as some
architextures (e.g. i386) do not distinguish between read and exec pages
Inspired by: http://linux.bkbits.net:8080/linux-2.4/cset@1.1267.1.85
Reviewed by: alc
pmap. For the kernel pmap, Giant is not required. In general, for
other pmaps, Giant is required by i386's pmap_pte() implementation.
Specifically, the use of PMAP2/PADDR2 is synchronized by Giant.
Note: In principle, updates to the kernel pmap's wired count could be
lost without Giant. However, in practice, we never use the kernel
pmap's wired count. This will be resolved when pmap locking appears.
- With the above change, cpu_thread_clean() and uma_large_free() need
not acquire Giant. (The first case is simply the revival of
i386/i386/vm_machdep.c's revision 1.226 by peter.)
ever since alpha/alpha/pmap.c revision 1.81 introduced the list allpmaps,
there has been no reason for having this function on Alpha. Briefly,
when pmap_growkernel() relied upon the list of all processes to find and
update the various pmaps to reflect a growth in the kernel's valid
address space, pmap_init2() served to avoid a race between pmap
initialization and pmap_growkernel(). Specifically, pmap_pinit2() was
responsible for initializing the kernel portions of the pmap and
pmap_pinit2() was called after the process structure contained a pointer
to the new pmap for use by pmap_growkernel(). Thus, an update to the
kernel's address space might be applied to the new pmap unnecessarily,
but an update would never be lost.
introduction of kern_mlock() and kern_munlock() in
src/sys/kern/kern_sysctl.c 1.150
src/sys/vm/vm_extern.h 1.69
src/sys/vm/vm_glue.c 1.190
src/sys/vm/vm_mmap.c 1.179
because different resource limits are appropriate for transient and
"permanent" page wiring requests.
Retain the kern_mlock() and kern_munlock() API in the revived
vslock() and vsunlock() functions.
Combine the best parts of each of the original sets of implementations
with further code cleanup. Make the mclock() and vslock()
implementations as similar as possible.
Retain the RLIMIT_MEMLOCK check in mlock(). Move the most strigent
test, which can return EAGAIN, last so that requests that have no
hope of ever being satisfied will not be retried unnecessarily.
Disable the test that can return EAGAIN in the vslock() implementation
because it will cause the sysctl code to wedge.
Tested by: Cy Schubert <Cy.Schubert AT komquats.com>
unnecessary and wrong. While it is necessary to verify that the page is
still free after dropping and reacquiring the free page queue lock, the
physical contiguity of the page can not change, making this check
unnecessary. This check was wrong in that it could cause an out-of-bounds
array access.
Tested by: rwatson
vm_page_free() is called. The problem with holding this lock is that it is
a spin lock and vm_page_free() may attempt the acquisition of a different
default-type lock.
the syscall arguments and does the suser() permission check, and
kern_mlock(), which does the resource limit checking and calls
vm_map_wire(). Split munlock() in a similar way.
Enable the RLIMIT_MEMLOCK checking code in kern_mlock().
Replace calls to vslock() and vsunlock() in the sysctl code with
calls to kern_mlock() and kern_munlock() so that the sysctl code
will obey the wired memory limits.
Nuke the vslock() and vsunlock() implementations, which are no
longer used.
Add a member to struct sysctl_req to track the amount of memory
that is wired to handle the request.
Modify sysctl_wire_old_buffer() to return an error if its call to
kern_mlock() fails. Only wire the minimum of the length specified
in the sysctl request and the length specified in its argument list.
It is recommended that sysctl handlers that use sysctl_wire_old_buffer()
should specify reasonable estimates for the amount of data they
want to return so that only the minimum amount of memory is wired
no matter what length has been specified by the request.
Modify the callers of sysctl_wire_old_buffer() to look for the
error return.
Modify sysctl_old_user to obey the wired buffer length and clean up
its implementation.
Reviewed by: bms
swap_pager_putpages()'s buffer completion code. Note: the only
difference between swp_pager_sync_iodone() and bdone(), aside from
the locking in the latter, was the unnecessary clearing of B_ASYNC.
- Remove an unnecessary pmap_page_protect() from
swp_pager_async_iodone().
Reviewed by: tegge
result in a panic "vm_page_cache: caching a dirty page, ...": Access to the
page must be restricted or removed before calling vm_page_cache(). This
race condition is identical in nature to that which was addressed by
vm_pageout.c's revision 1.251 and vm_page.c's revision 1.275.
MFC after: 7 days
panic "vm_page_cache: caching a dirty page, ...": Access to the page must
be restricted or removed before calling vm_page_cache(). This race
condition is identical in nature to that which was addressed by
vm_pageout.c's revision 1.251 and vm_page.c's revision 1.275.
Reviewed by: tegge
MFC after: 7 days
could result in a panic "vm_page_cache: caching a dirty page, ...":
Access to the page must be restricted or removed before calling
vm_page_cache(). This race condition is identical in nature to that
which was addressed by vm_pageout.c's revision 1.251.
- Simplify the code surrounding the fix to this same race condition
in vm_pageout.c's revision 1.251. There should be no behavioral
change. Reviewed by: tegge
MFC after: 7 days
shown that it is not useful.
Rename the relative count g_access_rel() function to g_access(), only
the name has changed.
Change all g_access_rel() calls in our CVS tree to call g_access() instead.
Add an #ifndef BURN_BRIDGES #define of g_access_rel() for source
code compatibility.
the added comment for low-level details.) The effect of this race
condition is a panic "vm_page_cache: caching a dirty page, ..."
Reviewed by: tegge
MFC after: 7 days
- struct plimit includes a mutex to protect a reference count. The plimit
structure is treated similarly to struct ucred in that is is always copy
on write, so having a reference to a structure is sufficient to read from
it without needing a further lock.
- The proc lock protects the p_limit pointer and must be held while reading
limits from a process to keep the limit structure from changing out from
under you while reading from it.
- Various global limits that are ints are not protected by a lock since
int writes are atomic on all the archs we support and thus a lock
wouldn't buy us anything.
- All accesses to individual resource limits from a process are abstracted
behind a simple lim_rlimit(), lim_max(), and lim_cur() API that return
either an rlimit, or the current or max individual limit of the specified
resource from a process.
- dosetrlimit() was renamed to kern_setrlimit() to match existing style of
other similar syscall helper functions.
- The alpha OSF/1 compat layer no longer calls getrlimit() and setrlimit()
(it didn't used the stackgap when it should have) but uses lim_rlimit()
and kern_setrlimit() instead.
- The svr4 compat no longer uses the stackgap for resource limits calls,
but uses lim_rlimit() and kern_setrlimit() instead.
- The ibcs2 compat no longer uses the stackgap for resource limits. It
also no longer uses the stackgap for accessing sysctl's for the
ibcs2_sysconf() syscall but uses kernel_sysctl() instead. As a result,
ibcs2_sysconf() no longer needs Giant.
- The p_rlimit macro no longer exists.
Submitted by: mtm (mostly, I only did a few cleanups and catchups)
Tested on: i386
Compiled on: alpha, amd64
when uma_reclaim() was called. This was introduced when the zone
working-set algorithm was removed in favor of using the per cpu caches
as the working set.
"scheduler" here has very little to do with scheduling. It is actually
the swapper, and it really must be the last SYSINIT'ed item like its
comment says, since proc0 metamorphoses into swapper by calling
scheduler() last in mi_start(), and scheduler() never returns.. Rev.1.29
of subr_4bsd.c broke this by adding another SI_ORDER_FIRST item
(kproc_start() for schedcpu_thread() onto the SI_SUB_RUN_SCHEDULER_LIST.
The sorting of SYSINITs with identical orders (at all levels) is
apparently nondeterministic, so this resulted in schedule() sometimes
being called second last and schedcpu_thread() not being called at all.
This quick fix just changes the code to almost match the comment
(SI_ORDER_FIRST -> SI_ORDER_ANY). "LAST" is misspelled "ANY", and
there is no way to ensure that there is only 1 very lst SYSINIT.
A more complete fix would remove the SYSINIT obfuscation.
SW_INVOL. Assert that one of these is set in mi_switch() and propery
adjust the rusage statistics. This is to simplify the large number of
users of this interface which were previously all required to adjust the
proper counter prior to calling mi_switch(). This also facilitates more
switch and locking optimizations.
- Change all callers of mi_switch() to pass the appropriate paramter and
remove direct references to the process statistics.
full state. (When swap is added their state will change appropriately.)
2. Set swap_pager_full and swap_pager_almost_full to the full state when
the last swap device is removed.
Combined these changes eliminate nonsense messages from the kernel on swap-
less machines.
Item 2 submitted by: Divacky Roman <xdivac02@stud.fit.vutbr.cz>
Prodding by: phk
