and ffs_lock. This cannot catch situations where holdcnt is incremented
not by curthread, but I think it is useful.
Reviewed by: tegge, attilio
Tested by: pho
MFC after: 2 weeks
In particular following functions KPI results modified:
- bufobj_invalbuf()
- bufsync()
and BO_SYNC() "virtual method" of the buffer objects set.
Main consumers of bufobj functions are affected by this change too and,
in particular, functions which changed their KPI are:
- vinvalbuf()
- g_vfs_close()
Due to the KPI breakage, __FreeBSD_version will be bumped in a later
commit.
As a side note, please consider just temporary the 'curthread' argument
passing to VOP_SYNC() (in bufsync()) as it will be axed out ASAP
Reviewed by: kib
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
wait until the current suspension is lifted instead of silently returning
success immediately. The consequences of calling vfs_write() resume when
not owning the suspension are not well-defined at best.
Add the vfs_susp_clean() mount method to be called from
vfs_write_resume(). Set it to process_deferred_inactive() for ffs, and
stop calling it manually.
Add the thread flag TDP_IGNSUSP that allows to bypass the suspension
point in the vn_start_write. It is intended for use by VFS in the
situations where the suspender want to do some i/o requiring calls to
vn_start_write(), and this i/o cannot be done later.
Reviewed by: tegge
In collaboration with: pho
MFC after: 1 month
Show the b_dep value for the buffer in the show buffer command.
Add a comand to dump the dirty/clean buffer list for vnode.
Reviewed by: tegge
Tested and used by: pho
MFC after: 1 month
MNT_RDONLY flag before the VFS_MOUNT() is called. In ufs_inactive()
and ufs_itimes_locked(), UFS verifies whether the fs is read-only by
checking MNT_RDONLY, but this may cause loss of the IN_MODIFIED flag
for inode on the fs being remounted rw->ro.
Introduce UFS_RDONLY() struct ufsmount' method that reports the value
of the fs_ronly. The later is set to 1 only after the remount is
finished.
Reviewed by: tegge
In collaboration with: pho
MFC after: 1 month
inode having number ino. In r170991, the ip was marked IN_MODIFIED, that
is not quite correct.
Mark only the right inode modified by checking inode number.
Reviewed by: tegge
In collaboration with: pho
MFC after: 1 month
insert new vnode into the mount vnode list. Then, for the SU-enabled
mount, ffs_vfree could create freefile dependency. This dependency can
hang around forever since inode is not marked as IN_MODIFIED and
correspondingly inodeblock may be not marked as dirty.
After ffs_vget() fails, retry with FFSV_FORCEINSMQ, mark the inode as
modified, and vput() it immediately. Take care of the dup alloc.
Tested by: pho
Reviewed by: tegge
MFC after: 1 month
dependencies. In particular, it may need this while syncing filesystem
being unmounted. Since during unmount MNTK_NOINSMNTQUE flag is set,
that could sometimes disallow insertion of the vnode into the vnode
mount list, softdep code needs to overwrite the MNTK_NOINSMNTQUE flag.
Create the ffs_vgetf() function that sets the VV_FORCEINSMQ flag for
new vnode and use it consistently from the softdep code instead of
ffs_vget().
Add the retry logic to the softdep_flushfiles() to flush the vnodes
that could be instantiated while flushing softdep dependencies.
Tested by: pho, kris
Reviewed by: tegge
MFC after: 1 month
performed with snapshot option, while the mp->mnt_opt is NULL.
Protect against NULL pointer dereference.
Noted by: Mateusz Guzik <mjguzik gmail com>
MFC after: 3 days
vnode buffers locked at once. In particular, there are indirect buffers
among locked ones. The bdwrite() may start the flushing to keep dirty
buffer list at the bounds. If any buffer on the dirty list requires
translation from logical to physical block number, code may ends up
trying to lock an indirect buffer already locked in ffs_balloc_ufsX.
Prevent the bdflush() activity when several buffers are locked at once
by setting the TDP_INBDFUSH for the problematic code blocks.
Reported and tested by: pho, Josef Buchsteiner at Juniper
In collaboration with: kan
MFC after: 1 month
delete "snapshot" from the persistent mount options list.
This should fix problems with doing a mount -o snapshot of a file system, followed by
an NFS export of the same file system.
PR: 122833
Reported by: Leon Kos <leon.kos lecad fs uni-lj si>,
Jaakko Heinonen <jh saunalahti fi>
MFC after: 1 month
here, because we already do them further up in vfs_donmount() in vfs_mount.c
async -> MNT_ASYNC
force -> MNT_FORCE
multilabel -> MNT_MULTILABEL
noatime -> MNT_NOATIME
noclusterr -> MNT_NOCLUSTERR
noclusterw -> MNT_NOCLUSTERW
MFC after: 1 month
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
to protect the v_lock pointer. Removing the interlock acquisition
here allows vn_lock() to proceed without requiring the interlock
at all.
- If the lock mutated while we were sleeping on it the interlock has
been dropped. It is conceivable that the upper layer code was
relying on the interlock and LK_NOWAIT to protect the identity or
state of the vnode while acquiring the lock. In this case return
EBUSY rather than trying the new lock to prevent potential races.
Reviewed by: tegge
Keeping the lockmgr lock valid allows us to switch the v_lock pointer
in snapshot vnodes between the embedded lockmgr lock and snapdata
lock without needing the vnode interlock to protect against races
- Keep unused snapdata structures in a list.
- Add a function to lock the devvp and allocate a snapdata to it or
acquire a new one without races. The old function was safe from
creation races because we set the mount flag when creating snapshots
and thus serializing them. However, it might have been subject to
destroying races.
Reviewed by: tegge
(such as 'atime' vs 'noatime'). The filesystems will always see either
'nofoo' or 'nonofoo', never plain 'foo'. As such, their list of valid
mount options should include 'nofoo' instead of 'foo'. With this fix,
you can do 'mount -u -o atime' on a FFS filesystem that isn't marked as
noatime without getting an error. You can also update a noatime FFS
filesystem mounted via mount(2) (e.g. 6.x /sbin/mount binary) to 'atime'
using nmount(2) (e.g. 7.x /sbin/mount binary).
MFC after: 1 week
Reviewed by: crodig
vnodes belonging to the mountpoint. Also, yield when in the
softdep_process_worklist() even when we are not going to sleep due to
buffer drain.
It is believed that the ULE fixed the problem [1], but the yielding
seems to be needed at least for the 4BSD case.
Discussed: on stable@, with bde
Reviewed by: tegge, jeff [1]
MFC after: 2 weeks
BO_LOCK/UNLOCK/MTX when manipulating the bufobj.
- Create a new lock in the bufobj to lock bufobj fields independently.
This leaves the vnode interlock as an 'identity' lock while the bufobj
is an io lock. The bufobj lock is ordered before the vnode interlock
and also before the mnt ilock.
- Exploit this new lock order to simplify softdep_check_suspend().
- A few sync related functions are marked with a new XXX to note that
we may not properly interlock against a non-zero bv_cnt when
attempting to sync all vnodes on a mountlist. I do not believe this
race is important. If I'm wrong this will make these locations easier
to find.
Reviewed by: kib (earlier diff)
Tested by: kris, pho (earlier diff)
ffs_extread() when setting the IN_ACCESS flag by checking whether the
IN_ACCESS is already set. The possible race there is admissible.
Tested by: pho
Submitted by: jeff
requiring the per-process spinlock to only requiring the process lock.
- Reflect these changes in the proc.h documentation and consumers throughout
the kernel. This is a substantial reduction in locking cost for these
fields and was made possible by recent changes to threading support.
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
callout_* API (e.g. callout_init_mtx(9)). This was one of the numerous
items on the http://wiki.freebsd.org/SMPTODO list.
Reviewed by: imp, obrien, jhb
MFC after: 1 week
It is normally initialized by ffs_statfs() after ffs_mount finished.
The extattr autostart code calls the ufs_lookup(), that uses value above
to iterate over the directory blocks, see bmask initialization in the
ufs_lookup() and ufsdirhash. Having the filesystem with root directory
spanning more then one block would result in reading a random kernel
memory.
PR: kern/120781
Test case provided by: rwatson
MFC after: 1 week
always curthread.
As KPI gets broken by this patch, manpages and __FreeBSD_version will be
updated by further commits.
Tested by: Andrea Barberio <insomniac at slackware dot it>
namespace in order to handle lockmgr fields in a controlled way instead
than spreading all around bogus stubs:
- VN_LOCK_AREC() allows lock recursion for a specified vnode
- VN_LOCK_ASHARE() allows lock sharing for a specified vnode
In FFS land:
- BUF_AREC() allows lock recursion for a specified buffer lock
- BUF_NOREC() disallows recursion for a specified buffer lock
Side note: union_subr.c::unionfs_node_update() is the only other function
directly handling lockmgr fields. As this is not simple to fix, it has
been left behind as "sole" exception.
the same operation of lockmgr() but accepting a custom wmesg, prio and
timo for the particular lock instance, overriding default values
lkp->lk_wmesg, lkp->lk_prio and lkp->lk_timo.
- Use lockmgr_args() in order to implement BUF_TIMELOCK()
- Cleanup BUF_LOCK()
- Remove LK_INTERNAL as it is nomore used in the lockmgr namespace
Tested by: Andrea Barberio <insomniac at slackware dot it>
- Remove the "thread" argument from the lockmgr() function as it is
always curthread now
- Axe lockcount() function as it is no longer used
- Axe LOCKMGR_ASSERT() as it is bogus really and no currently used.
Hopefully this will be soonly replaced by something suitable for it.
- Remove the prototype for dumplockinfo() as the function is no longer
present
Addictionally:
- Introduce a KASSERT() in lockstatus() in order to let it accept only
curthread or NULL as they should only be passed
- Do a little bit of style(9) cleanup on lockmgr.h
KPI results heavilly broken by this change, so manpages and
FreeBSD_version will be modified accordingly by further commits.
Tested by: matteo
lockmgr lkp, when held in exclusive mode, is recursed
- Introduce the function BUF_RECURSED() which does the same for bufobj
locks based on the top of lockmgr_recursed()
- Introduce the function BUF_ISLOCKED() which works like the counterpart
VOP_ISLOCKED(9), showing the state of lockmgr linked with the bufobj
BUF_RECURSED() and BUF_ISLOCKED() entirely replace the usage of bogus
BUF_REFCNT() in a more explicative and SMP-compliant way.
This allows us to axe out BUF_REFCNT() and leaving the function
lockcount() totally unused in our stock kernel. Further commits will
axe lockcount() as well as part of lockmgr() cleanup.
KPI results, obviously, broken so further commits will update manpages
and freebsd version.
Tested by: kris (on UFS and NFS)
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.
KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.
Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.
Manpage and FreeBSD_version will be updated through further commits.
As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.
Tested by: Diego Sardina <siarodx at gmail dot com>,
Andrea Di Pasquale <whyx dot it at gmail dot com>
allocation, free the indirect blocks before clearing the disk pointers,
that could lead to the softupdate inconsistencies in the case of the
machine or disk crash at the wrong time.
Rearrange the recover code to do the ffs_blkfree() after the second
ffs_syncvnode(), that clears the pointers chain.
Proposed and reviewed by: tegge
Tested by: Peter Holm
MFC after: 3 weeks
the inode, do the rollback in case the allocation failed (due to
insufficient free space or quota limits). But, the code does leaves the
buffers corresponding to the inoirect blocks on the vnode bufobj list.
This causes several assertion failures (for instance, "ffs_truncate3"
in ffs_truncate()) to fail, and could result in the indirect block
aliasing problem, like writing the context of such blocks to random
disk location.
Remove the buffers from the bufobj properly.
Reported and tested by: Peter Holm
Reviewed by: tegge
MFC after: 3 weeks
gets enabled when INVARIANTS is on instead of DIAGNOSTIC (which apparently
nobody uses). From Tor's description:
This happens when the block range spans two block maps, the first in the
inode (mapping up to NDADDR direct blocks) and the second being the first
indirect block. The current check assumes that both block maps are
indirect blocks.
Work done by: tegge
Tested by: kris, kensmith
