This allows the TL-WDR3600 to use the correct MAC address for ath0, ath1
and arge0. arge1 isn't used; until I disable it entirely it'll just
show up with a randomly generated MAC.
This is used by the AR71xx platform code to choose a local MAC based on
the "board MAC address", versus whatever potentially invalid/garbage
values are stored in the Atheros calibration data.
A lot of these dinky atheros based MIPS boards don't have a nice, well,
anything consistent defining their MAC addresses for things.
The Atheros reference design boards will happily put MAC addresses
into the wifi module calibration data like they should, and individual
ethernet MAC addresses into the calibration area in flash.
That makes my life easy - "hint.arge.X.eeprommac=<addr>" reads from
that flash address to extract a MAC, and everything works fine.
However, aside from some very well behaved vendors (eg the Carambola 2
board), everyone else does something odd.
eg:
* a MAC address in the environment (eg ubiquiti routerstation/RSPRO)
that you derive arge0/arge1 MAC addresses from.
* a MAC address in flash that you derive arge0/arge1 MAC addresses from.
* The wifi devices having their own MAC addresses in calibration data,
like normal.
* The wifi devices having a fixed, default or garbage value for a MAC
address in calibration data, and it has to be derived from the
system MAC.
So to support this complete nonsense of a situation, there needs to be
a few hacks:
* The "board" MAC address needs to be derived from somewhere and squirreled
away. For now it's either redboot or a MAC address stored in calibration
flash.
* Then, a "map" set of hints to populate kenv with some MAC addresses
that are derived/local, based on the board address. Each board has
a totally different idea of what you do to derive things, so each
map entry has an "offset" (+ve or -ve) that's added to the board
MAC address.
* Then if_arge (and later, if_ath) should check kenv for said hint and
if it's found, use that rather than the EEPROM MAC address - which may
be totally garbage and not actually work right.
In order to do this, I've undone some of the custom redboot expecting
hacks in if_arge and the stuff that magically adds one to the MAC
address supplied by the board - instead, as I continue to test this
out on more hardware, I'll update the hints file with a map explaining
(a) where the board MAC should come from, and (b) what offsets to use
for each device.
The aim is to have all of the tplink, dlink and other random hardware
we run on have valid MAC addresses at boot, so (a) people don't get
random B:S:D❌x:x ethernet MACs, and (b) the wifi MAC is valid
so it works rather than trying to use an invalid address that
actually upsets systems (think: multicast bit set in BSSID.)
Tested:
* TP-Link TL_WDR3600 - subsequent commits will add the hints map
and the if_ath support.
TODO:
* Since this is -HEAD, and I'm all for debugging, there's a lot of
printf()s in here. They'll eventually go under bootverbose.
* I'd like to turn the macaddr routines into something available
to all drivers - too many places hand-roll random MAC addresses
and parser stuff. I'd rather it just be shared code.
However, that'll require more formal review.
* More boards.
The -a flag reads a file saved by -O, not -o.
The -m flag requires the -R flag. Copy that paragraph from -a.
Reviewed by: adrian
Approved by: kib (mentor)
MFC after: 1 week
Sponsored by: Dell Inc
in this area and by the Clang static analyzer.
Remove some dead assignments.
Fix a typo in a panic string.
Use umtx_pi_disown() instead of duplicate code.
Use an existing variable instead of curthread.
Approved by: kib (mentor)
MFC after: 3 days
Sponsored by: Dell Inc
common (autogenerated) versions. Removes extra vertical space,
and makes it easier to grep for usage throughout the tree.
Conditionally compile only for arm6 [1] (yes sounds odd but is right).
Submitted by: andrew [1]
Reviewed by: gnn, andrew (ian earlier version I think)
Differential Revision: https://reviews.freebsd.org/D2159
Obtained from: Cambridge/L41
Sponsored by: DARPA, AFRL
CPU, also add protection against invalid CPU's as well as
split c_flags and c_iflags so that if a user plays with the active
flag (the one expected to be played with by callers in MPSAFE) without
a lock, it won't adversely affect the callout system by causing a corrupt
list. This also means that all callers need to use the macros and *not*
play with the falgs directly (like netgraph used to).
Differential Revision: htts://reviews.freebsd.org/D1894
Reviewed by: .. timed out but looked at by jhb, imp, adrian hselasky
tested by hiren and netflix.
Sponsored by: Netflix Inc.
originated from the return to usermode. #ss must be handled same as
#np.
Reported by: Andrew Lutomirski through secteam
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Without this the autotuning fails for small amounts of RAM (32mb),
which all the AR91xx shipping products seemed to have.
Thanks to gjb for reminding me to re-test this stuff.
Tested:
* AR91xx, TP-Link TL-WR1043nd v1
duplicated code in the two classes, and also allows devices in FDT-based
systems to declare simplebus as their parent and still work correctly
when the FDT data describes the device at the root of the tree rather
than as a child of a simplebus (which is common for interrupt, clock,
and power controllers).
Differential Revision: https://reviews.freebsd.org/D1990
Submitted by: Michal Meloun
are built by default. You can still override that with MODULES_EXTRA
for experimental features like ZFS and dtrace on some
architectures. Also note that kernel config files are not affected by
MK_ options listed, though some targets might be.
- make sure the timeout computations are always above zero by using
the existing "linux_timer_jiffies_until()" function. Negative timeouts
can result in undefined behaviour.
- declare all completion functions like external symbols and move the
code to the LinuxAPI kernel module.
- add a proper prefix to all LinuxAPI kernel functions to avoid
namespace collision with other parts of the FreeBSD kernel.
- clean up header file inclusions in the linux/completion.h, linux/in.h
and linux/fs.h header files.
MFC after: 1 week
Sponsored by: Mellanox Technologies
sequence is performed on UFS SU+J rootfs:
cp -Rp /sbin/init /sbin/init.old
mv -f /sbin/init.old /sbin/init
Hang occurs on the rootfs unmount. There are two issues:
1. Removed init binary, which is still mapped, creates a reference to
the removed vnode. The inodeblock for such vnode must have active
inodedep, which is (eventually) linked through the unlinked list. This
means that ffs_sync(MNT_SUSPEND) cannot succeed, because number of
softdep workitems for the mp is always > 0. FFS is suspended during
unmount, so unmount just hangs.
2. As noted above, the inodedep is linked eventually. It is not
linked until the superblock is written. But at the vfs_unmountall()
time, when the rootfs is unmounted, the call is made to
ffs_unmount()->ffs_sync() before vflush(), and ffs_sync() only calls
ffs_sbupdate() after all workitems are flushed. It is masked for
normal system operations, because syncer works in parallel and
eventually flushes superblock. Syncer is stopped when rootfs
unmounted, so ffs_sync() must do sb update on its own.
Correct the issues listed above. For MNT_SUSPEND, count the number of
linked unlinked inodedeps (this is not a typo) and substract the count
of such workitems from the total. For the second issue, the
ffs_sbupdate() is called right after device sync in ffs_sync() loop.
There is third problem, occuring with both SU and SU+J. The
softdep_waitidle() loop, which waits for softdep_flush() thread to
clear the worklist, only waits 20ms max. It seems that the 1 tick,
specified for msleep(9), was a typo.
Add fsync(devvp, MNT_WAIT) call to softdep_waitidle(), which seems to
significantly help the softdep thread, and change the MNT_LAZY update
at the reboot time to MNT_WAIT for similar reasons. Note that
userspace cannot create more work while devvp is flushed, since the
mount point is always suspended before the call to softdep_waitidle()
in unmount or remount path.
PR: 195458
In collaboration with: gjb, pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
When CPU is not busy, those queues are typically empty. When CPU is busy,
then one more extra sorting is the last thing it needs. If specific device
(HDD) really needs sorting, then it will be done later by CAM.
This supposed to fix livelock reported for mirror of two SSDs, when UFS
fires zillion of BIO_DELETE requests, that totally blocks I/O subsystem by
pointless sorting of requests and responses under single mutex lock.
MFC after: 2 weeks
the PMC_IN_KERNEL() macro definition.
Add missing macros to extract the return address (LR) from the trapframe.
Discussed with: andrew
Obtained from: Cambridge/L41
Sponsored by: DARPA, AFRL
MFC after: 2 weeks
any defaults or user specified actions on the command line. This would
be useful for specifying features that are always broken or that
cannot make sense on a specific architecture, like ACPI on pc98 or
EISA on !i386 (!x86 usage of EISA is broken and there's no supported
hardware that could have it in any event). Any items in
__ALWAYS_NO_OPTIONS are forced to "no" regardless of other settings.
Differential Revision: https://reviews.freebsd.org/D2011
There are a number of assumptions about legacy interrupts always
being available in virtio so don't allow back-ends to make the
decision to support them.
This fixes the issue seen with virtio-rnd on OpenBSD. MSI-x vectors
were not being used, and the virtio-rnd backend wasn't allocating a
legacy interrupt resulting in a bhyve assert and guest exit.
Reported by: Julian Hsiao, madoka at nyanisore dot net
Reviewed by: neel
MFC after: 1 week
In particular, this allows an administrator to specify "-h" for human
readable output if that is preferred.
The default setting passes "-d", so that can be excluded by using a custom
setting.
Differential Revision: https://reviews.freebsd.org/D2034
Submitted by: Lystopad Aleksandr <laa@laa.zp.ua>
(patch to add option for -h)
Reviewed by: bz
MFC after: 1 week
