is nothing left in the file that related to pwmbus at all. It just contains
prototypes for the functions implemented in dev/pwm.ofw_pwm.c, so name it
accordingly and fix the include protect wrappers to match.
A new pwmbus.h will be coming along in a future commit.
The pwm and pwmbus interfaces were nearly identical, this merges them into a
single pwmbus interface. The pwmbus driver now implements the pwmbus
interface by simply passing all calls through to its parent (the hardware
driver). The channel_count method moves from pwm to pwmbus, and the
get_bus method is deleted (just no longer needed).
The net effect is that the interface for doing pwm stuff is now the same
regardless of whether you're a child of pwmbus, or some random driver
elsewhere in the hierarchy that is bypassing the pwmbus layer and is talking
directly to the hardware driver via cross-hierarchy connections established
using fdt data.
The pwmc driver is now a child of pwmbus, instead of being its sibling
(that's why the get_bus method is no longer needed; pwmc now gets the
device_t of the bus using device_get_parent()).
driver is compiled into the kernel but pwmbus will be loaded as a module
when needed (and because of that, pwmbus_attach_bus() is going away in
the near future). Instead, just directly do what that function did:
register the fdt xfef handle, and attach the pwmbus.
resources if they got allocated (because detach() gets called from attach()
to handle various failures), and delete the pwmbus child if it got created.
Hide unused code under #ifdef notyet (in one case the only caller is under
that same ifdef), or if it is arm (not arm64) specific code under the
__arm__ ifdef to not yield -Wunused-function warnings during the arm64
kernel compile.
MFC after: 2 weeks
Some clocks used the NM type but this clock is for the ones with the
formula "clk = clkin / n / m" and not "clk = clkin * n / m"
Use the new frac clock for them.
Add a clock driver for clock that can either be used in integer mode
with one N factor and one M divider or in fractional mode where the
output frequency is chosen between two predifined output.
This was enumerated with exhaustive search for sys/eventhandler.h includes,
cross-referenced against EVENTHANDLER_* usage with the comm(1) utility. Manual
checking was performed to avoid redundant includes in some drivers where a
common os_bsd.h (for example) included sys/eventhandler.h indirectly, but it is
possible some of these are redundant with driver-specific headers in ways I
didn't notice.
(These CUs did not show up as missing eventhandler.h in tinderbox.)
X-MFC-With: r347984
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
We don't have the display engine driver commited in FreeBSD yet so it is
useless to expose the clocks yet (and also it have not been tested on H5).
Reported by: Manuel Stühn (freebsdnewbie@freenet.de)
PR: 237571
MFC after: 1 week
Allwinner H3 and H5 share many internal components, that's why they can
use the same drivers.
This patch adds the compatible strings to enable clock drivers
probing on Allwinner NanoPI NEO2 device.
Tested on: NanoPi NEO2 (by submitter), OrangePi PC2 (by manu)
Submitted by: Manuel Stühn (freebsdnewbie@freenet.de)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D20069
Due to three conditions the codec driver for Allwinner A10/A20 and H3/H5 did not work properly here:
Wrong bit position for the analog audio reset
Hardware Reset of codec was not de-asserted correctly
Linux DTS file did not contain the address of the analog register the way as the driver was expecting it.
This patch proposes fixes for those three parts.
Submitted by: freebsdnewbie@freenet.de (Manuel Stühn)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19910
The old clocks are disconneted from the build since r337344.
Remove all those pseudo drivers. The only one remaining is for gmac
(the ethernet controller) so move it to sys/arm/allwinner.
While here remove a83t support from gmacclk as it is unneeded since r326114.
MFC after: 1 month
Since 5.0 DTS the syscon controller have a new compatible as it
exports new subnodes, we currently only use it as a syscon provider
so just add the new compatible.
Tested On: H3
MFC after: 1 month
Since latest DTS update the rtc is supposed to register two clocks :
- osc32k (the 32k oscillator on the board that the RTC uses directly and
that other peripheral can use)
- iosc (the internal oscillator of the RTC when available which frequency
depend on the SoC revision)
Since we need the RTC before the proper clock control unit (because it uses
those clocks) attach it a BUS_PASS_BUS + MIDDLE and attach the clock control
unit at BUS_PASS_BUS + LAST for the SoC that requires it.
Tested On: A20, H3, A64
MFC after: 1 month
If a custom block size requested, use it, otherwise revert to the previous logic
of using just a data size if it's less than MMC_BLOCK_SIZE, and MMC_BLOCK_SIZE otherwise.
Reviewed by: bz
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D19783
Using DFLTPHYS/MAXPHYS is not always OK, instead make it possible for the
controller driver to provide maximum data size to MMCCAM, and use it there.
The old stack already does this.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15892
When comparing best frequencies use the absolute value.
If we do not do that we end up choosing an always lower value than
the best one if the exact freq cannot be met.
MFC after: 2 weeks
The charging current can be set using steps
from 0: 200mA to 13: 2800mA (200mA/step).
While there, fix battery charging current related
sensor descriptions.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D19212
battery charging, charge state, voltage, charging current, discharging current,
battery capacity etc. can be obtained via sysctl.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D19145
reading some events from the interrupt status registers. These events
are reported to devd via system "PMU" and subsystem "Battery", "AC"
and "USB" such as plugged/unplugged, absent, charged and charging.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D19116
U-Boot will leave the ephy reset de-asserted and the MAC soft reset will
fail on these boards with internal PHY and no link established. Toggle reset
again before proceeding to attach/init.
MFC after: 1 week
This was intended to fix the soft reset timeout on boot for OrangePi One/R1
with internal PHY, but seems to cause other problems later on due to soft
resetting around some state changes that may or may not make the NIC
non-functional.
Reverting this for now while a better solution is sought out.
From NetBSD: Since the MAC can get stuck in reset state with no link, ignore
reset timeouts and continue with initializing the device.
Fixes "soft reset timeout" issue at boot with no network cable plugged in.
awg_init may be called multiple times throughout normal interface usage, so
the tx/rx descriptor base address registers must be written after each MAC
reset and are moved as such.
This problem has been observed on FreeBSD, H3/H2+ devices with an internal
PHY (includes OrangePi R1, OrangePi One at least).
Reviewed by: manu, ganbold
Obtained from: NetBSD
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18844
