in the manpage by having it display the current CPU (ki_oncpu) rather
than the previously used CPU (ki_lastcpu). ki_lastcpu is still used for
all other thread states.
Reported by: Chris Ross <cross+freebsd@distal.com>
MFC after: 1 week
cmdlengthdelta is the size of the header and we were using it to
allocate a buffer to store the command line. This would mean that
the cmdbuf could be too short. In practice this was never noticed unless
you usually run top -a. On a stock FreeBSD system you can see the
problem by running sendmail and then running top -a on a big terminal
window. In practice this doubles to size available to cmdbuf since the
header is around 65-68 bytes.
Reviewed by: adrian
usage on hosts using ZFS. The new line displays the total amount of RAM
used by the ARC along with the size of MFU, MRU, anonymous (in flight),
headers, and other (miscellaneous) sub-categories. The line is not
displayed on systems that are not using ZFS.
Reviewed by: avg, fs@
MFC after: 3 days
to the maximum number of CPUs to ensure that lcpustates[] array is always
allocated to the maximum size. Previously, if top was started without
per-CPU stats it would allocate a smaller lcpustates[] array. When
per-CPU stats were then enabled, it would overflow the array and trash
the cpustates_columns[] array causing the CPU stats to be printed in the
wrong locations.
Approved by: re (kib)
MFC after: 1 week
ki_rusage member when KERN_PROC_INC_THREAD is passed to one of the
process sysctls.
- Correctly account for the current thread's cputime in the thread when
doing the runtime fixup in calcru().
- Use TIDs as the key to lookup the previous thread to compute IO stat
deltas in IO mode in top when thread display is enabled.
Reviewed by: kib
Approved by: re (kib)
rather than at the bottom of the manpage.
- Remove an obsolete comment about SWAIT being a stale state. It was
resurrected for a different purpose in FreeBSD 5 to mark idle ithreads.
- Add a comment documenting that the SLEEP and LOCK states typically
display the name of the event being waited on with lock names being
prefixed with an asterisk and sleep event names not having a prefix.
MFC after: 1 week
idle threads). The process is displayed by default (subject to whether or
not system processes are displayed) to preserve existing behavior. The
system idle process can be hidden via the '-z' command line argument or the
'z' key while top is running. When it is hidden, top more closely matches
the behavior of FreeBSD <= 4.x where idle time was not accounted to any
process.
MFC after: 2 weeks
The bug was unnoticed on non-i386 because mp_maxid is
initialized differently, kern.cp_times doesn't print
zeroes for non-existing CPUs, so no "writing outside of
array bounds" happens.
MFC after: 3 days
kthread_add() takes the same parameters as the old kthread_create()
plus a pointer to a process structure, and adds a kernel thread
to that process.
kproc_kthread_add() takes the parameters for kthread_add,
plus a process name and a pointer to a pointer to a process instead of just
a pointer, and if the proc * is NULL, it creates the process to the
specifications required, before adding the thread to it.
All other old kthread_xxx() calls return, but act on (struct thread *)
instead of (struct proc *). One reason to change the name is so that
any old kernel modules that are lying around and expect kthread_create()
to make a process will not just accidentally link.
fix top to show kernel threads by their thread name in -SH mode
add a tdnam formatting option to ps to show thread names.
make all idle threads actual kthreads and put them into their own idled process.
make all interrupt threads kthreads and put them in an interd process
(mainly for aesthetic and accounting reasons)
rename proc 0 to be 'kernel' and it's swapper thread is now 'swapper'
man page fixes to follow.
- p_sflag was mostly protected by PROC_LOCK rather than the PROC_SLOCK or
previously the sched_lock. These bugs have existed for some time.
- Allow swapout to try each thread in a process individually and then
swapin the whole process if any of these fail. This allows us to move
most scheduler related swap flags into td_flags.
- Keep ki_sflag for backwards compat but change all in source tools to
use the new and more correct location of P_INMEM.
Reported by: pho
Reviewed by: attilio, kib
Approved by: re (kensmith)
priorities, etc.) in the NICE field:
Use a combination of pri_native and pri_user instead of pri_level to
guess the original realtime priority. Using pri_level here has been
wrong since 2001/02/12. Using only pri_native here would be correct
if the kernel actually initialized it reasonably. (The kernel exports
its raw td_base_priority as pri_native, but userland mostly wants a
refined base priority). Give up on waiting pri_native to work correctly
and only use it when there is nothing better (for kthreads).
This should reduce printing of bizarre pseudo-nice values. Bizarre
values are still printed if we observe a transient borrowed priority
for a kthread (transient borrowing is the main thing that makes the
raw td_base_priority almost useless in userland), or if there is a
kernel bug. One current kernel bug involves the kernel idprio thread
pagezero permanently changing its priority from PRI_MAX_IDLE (255) to
PUSER (160). Then the bizarre value "ki-6" is printed instead of
"ki31". Here "-6" is PRI_MIN_IDLE - PUSER = -64 truncated to 2
characters. We are observing a transient borrowed priority that has
become permanent due to a bug.
ps/print.c:priorityr() needs similar changes (including ones in stage 2
here).
titles extracted from argv vector instead of the real executable names.
This is useful when you want to watch applications that set their status
information via setproctitle(3).
Approved by: alfred
MFC after: 2 weeks
contains a sigdec[] vector of structures, but the generated output is
missing braces around the initializer of each struct, which
triggers warnings in WARNS=3:
src/usr.bin/top/sigdesc.h:10: warning: missing braces around initializer
src/usr.bin/top/sigdesc.h:10: warning: (near initialization for `sigdesc[0]')
* Fix the sigconv.awk script to generate a header with initializers
which look better.
* Add rules to usr.bin/top/Makefile that rebuilds a new sigconv.h
header which matches the correct signal set from the build-time
version of `${DESTDIR}/usr/include/signal.h' (so sigconv.h doesn't
get stale once changes are made to the header).
* Remove the old sigconv.h header, now that it is autoupdated at
build time.
* Various Makefile style fixes (the committed Makefile was kindly
submitted by Ruslan):
- Reorder .PATH, PROG, SRCS and CFLAGS to match style.Makefile(5)
- Split off the generated sources (sigdesc.h top.local.h) in an
SRCS+= line of their own.
- Add entries to CLEANFILES near the rules that generate the
respective files.
- Move the explicit rule which builds top.1 after the implicit
rules which generate its dependencies.
Reviewed by: ru, bde
Submitted by: ru (Makefile)
MFC after: 2 weeks
priority class and use this to:
- print "-" instead of a garbage value for ithreads. Print "-" instead
of the unused nice value for kthreads which are (mis)classified as
PRI_TIMESHARE. For such threads, the nice value can be set to nonzero
by root, but it is never used (at least by the 4bsd scheduler). For
ithreads, we didn't even print the unused value.
- print "i<priority>" and "r<priority>" instead of a biased "<priority>"
for idletime and realtime threads, Here <priority> is the priority
parameter to idprio/rtprio(1). Just add the prefix and remove the
bias for now. <priority> has been stored indirectly in the kernel
since 2001/02/12, and even the kernel cannot recover the original
value in all cases. Here we need to handle more cases than pri_to_rtp(),
but actually handle fewer cases, and end up printing garbage after
a thread changes its current priority while in the kernel.
- for idletime and realtime threads, if they are kthreads then add a prefix
of "k" to the previous string.
- for idletime and realtime threads, if they in the FIFO scheduling class
then add a suffix of "F" to the previous string (if it fits; the other
parts of the string are sure to fit unless <priority> is garbage).
machine.c. The traditional condition was (pctcpu > 0 || SRUN), but the
negation of the condition logic (from select to skip) made this come
out as (pctcpu > 0 && SRUN), leading to a very erratic display, except
for purely CPU bound processes.
This has been discussed in the mail lists some time ago and I have used
top with this patch on my systems for more than a year without problems
(just forgot to commit it earlier, since my systems were all fixed ...).
so that it can be more easily unbroken and extended.
Try to use `static', `const' (as appropriate), prototypes declared together,
and parameter names in prototypes for all private functions, not just the
new one.
command that toggles between the two and update the ORDER_PCTCPU()
macro to sort correctly by the visible "cpu" value.
This saves 6 more columns in 80-column terminals, making things a lot
better for the COMMAND column.
Tested on: i386, sparc64 (panther), amd64 (sledge)
Approved by: davidxu (in principle)
there are users on the system (even if not running a single process)
with a login > 8 chars.
I'm not all that happy limiting the username width like this, but it
restores sanity to top(1) output.
Discussed with: keramida
of lines in SMP machines (which are wider), until we have a better way
of handling window sizes & columns in top.
Caught by: ache, Andre Guibert de Bruet <andy@siliconlandmark.com>
Point hat: keramida
threads a process has. The THR column is disabled and disappears
when 'H' is hit, because then every thread gets its own output line.
- Allow sorting processes by "threads".
Approved by: davidxu
Inspired by: Jiawei Ye <leafy7382@gmail.com>
example) view io stats while sorting by process size. Also adds
voluntary and involuntary context-switch stats to the io page because
there was lots of room.
Submitted by: Dan Nelson dnelson at allantgroup.com
computing the io statistics over and over not as expensive.
This is a bit of a cop out, as I should just allocate a struct with
the computed values, but this will do for now.
are doing. Toggle this mode by hitting "m" or passing the command line
option "-m io" to top(1). This allows one to identify disk bandwidth
hogs much easier.
(and not thread) scope is to be displayed, use KERN_PROC_ALL and
accrue CPU% ourselves, as the kernel makes no attempt to do so.
Of course, this doesn't make most stats any less bogus when displaying
threaded processes, but at least the CPU time is added up and not just
always 0.00%. There are still issues with SCHED_ULE in top(1) that
cause other processes to display 0.00% CPU when they in fact have used
more.
characters. This should avoid unattractive wrapping for people who are
stuck in an 80x24 screen. :-)
PR: 22270
Submitted by: William Carrel <williamc@go2net.com>
fscale is a (64-bit) long. So just use a struct loadavg.
This fixes the recent failure of top on alphas:
top: sysctl(vm.loadavg...) failed: Cannot allocate memory
- use size_t for sizeof() so as to fix a few int/long warnings on alpha
Reviewed by: Thomas Moestl <tmoestl@gmx.net>
available via sysctl(). As a result, top should now be able to run without
setgid kmem.
Submitted by: Thomas Moestl <tmoestl@gmx.net>
Reviewed by: freebsd-audit
no longer contains kernel specific data structures, but rather
only scalar values and structures that are already part of the
kernel/user interface, specifically rusage and rtprio. It no
longer contains proc, session, pcred, ucred, procsig, vmspace,
pstats, mtx, sigiolst, klist, callout, pasleep, or mdproc. If
any of these changed in size, ps, w, fstat, gcore, systat, and
top would all stop working. The new structure has over 200 bytes
of unassigned space for future values to be added, yet is nearly
100 bytes smaller per entry than the structure that it replaced.
include:
* Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The
alpha port is still in transition and currently uses both.)
* Per-CPU idle processes.
* Interrupts are run in their own separate kernel threads and can be
preempted (i386 only).
Partially contributed by: BSDi (BSD/OS)
Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
seconds caused overflow. Use a type-safe but slightly slower comparison.
Comparisons for other fields are still fragile.
Fixed rounding of cputime (don't do extra work to get it slightly wrong
by first converting without rounding to milliseconds).
Removed dead code for setting cputime.
Fixed comments about cputime.
numbers as chars or use bogus casts in an attempt to unmisrepresnt
them. In top, don't assume that 0xff is the only negative cpu
number when cpu numbers are (mis)represented.
only likely to happen when you have a kernel<>userland mismatch,
but it's really annoying when top dumps core and leaves the terminal
in a mangled state; it's much nicer to print nicely formatted gibberish.
to half compensate for broken scaling of p_pctcpu in the kernel, but the
previous commit removed this compensation. %cpu values will be wrong by
a factor of stathz/hz until the kernel is fixed. (The kernel gets it
wrong by a factor of stathz/hz, and top got the compensation wrong by
a factor of 100/stathz.)
Clean up (or if antipodic: down) some of the msgbuf stuff.
Use an inline function rather than a macro for timecounter delta.
Maintain process "on-cpu" time as 64 bits of microseconds to avoid
needless second rollover overhead.
Avoid calling microuptime the second time in mi_switch() if we do
not pass through _idle in cpu_switch()
This should reduce our context-switch overhead a bit, in particular
on pre-P5 and SMP systems.
WARNING: Programs which muck about with struct proc in userland
will have to be fixed.
Reviewed, but found imperfect by: bde
username present on the system at startup and use that for the field width.
It's not ideal but (I think) better than it was before. The width is
limited to within 8..16.
