In r350842 I've switched the bus pass to resource so it matches the other
clock drivers but this cannot work as this drivers is meant to match
the dts node '/clocks' and if we don't do it at this pass simplebus is
catching this node and we cannot attach.
This solve booting on Allwinner boards that are still using /clocks (A20 SoC)
MFC after: 3 days
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler did not handle .codeNN directives. Clang gained
support quite some time ago, so we can build stand/ with IAS.
In some cases there were small differences in generated object output.
In the case of gptzfsboot however using GNU as or Clang IAS to assemble
gptldr.S resulted in identical final gptzfsboot binary output.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D11115
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS. In most cases IAS- and GNU as-assembled boot components were
identical, and CLANG_NO_IAS was already removed from other components.
Clang IAS produces different output for some components, including
pxeldr, so CLANG_NO_IAS was not previously removed for those.
In the case of pxeldr the difference is that IAS adds a size override
prefix (67h) to three instructions to specify a 32-bit address, even
though the two high bytes are zero and the address fits in 16 bits.
this wastes three bytes per instruction and causes some additional nop
npadding to be required elsewhere in the object, but pxeboot is not
size-constrained so it doesn't matter.
Sponsored by: The FreeBSD Foundation
Fix the reported boot failures and revert r350510.
Note this commit is effectively merging ACPICA 20190703 again and applying
an upstream patch.
https://github.com/acpica/acpica/commit/73f6372
Tested by: scottl
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS. In most cases IAS- and GNU as-assembled boot components were
identical, and CLANG_NO_IAS was already removed from other components.
Clang IAS produces different output for some components, including
cdboot, so CLANG_NO_IAS was not previously removed for those.
In the case of cdboot the difference is that IAS adds a size override
prefix (67h) to many instructions to specify a 32-bit address, even
though the two high bytes are zero. This wastes three bytes per
instance, but as cdboot is not size-constrained it doesn't matter.
Padding is also different in one case; Clang used two one-byte nops
while GNU as used a single two-byte xchg %eax, %eax. In any case, there
is no functional change.
Sponsored by: The FreeBSD Foundation
The old code worked, but wasted some stack space.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21275
mkheaders.c hasn't made headers in ~15 years. Belatedly update the comments to
reflect that all it does these days is warn about 'device foo' lines in the
config where we don't know what a 'foo' is.
Remove extra includes too. These also haven't been needed for 15 years and
weren't removed at the time the comment wasn't updated...
GCC isn't smart enough to realize that this variable was always initialized.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21271
GCC 4.2 isn't smart enough to know that this variable is already defined by
the time it's used.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21269
Use quad.h from libc instead for the time being. This reduces the number of
nearly-identical-quad.h we have in tree to two with only minor changes.
Prototypes for some *sh*di3 have been added to match the copy in libkern.
The differences between the two are likely few enough that they can perhaps
be merged with little additional effort to bring us down to 1.
MFC after: 3 days
illumos/illumos-gate@811964cd9f811964cd9fhttps://www.illumos.org/issues/10406
The large dnode changes from 8423 caused problems in zfs recv for a legacy
stream. This manifests when attempting to mount the received stream, but the
problem is in the receive code. We missed the following commit from ZoL which
fixes this.
commit da2feb42fb5c7a8c1e1cc67f7a880da9d8e97bc2
Author: Tom Caputi <tcaputi@datto.com>
Date: Thu Jun 28 17:55:11 2018 -0400
Fix 'zfs recv' of non large_dnode send streams
Currently, there is a bug where older send streams without the
DMU_BACKUP_FEATURE_LARGE_DNODE flag are not handled correctly.
The code in receive_object() fails to handle cases where
drro->drr_dn_slots is set to 0, which is always the case when the
sending code does not support this feature flag. This patch fixes
the issue by ensuring that that a value of 0 is treated as
DNODE_MIN_SLOTS.
Author: Tom Caputi <tcaputi@datto.com>
MFC after: 3 weeks
X-MFC after: r351074
8423 8199 7432 Implement large_dnode pool feature
8423 Implement large_dnode pool feature
8199 multi-threaded dmu_object_alloc()
7432 Large dnode pool feature
llumos/illumos-gate@54811da5ac54811da5achttps://www.illumos.org/issues/8423https://www.illumos.org/issues/8199https://www.illumos.org/issues/7432
ZoL issues:
Improved dnode allocation #6564
Clean up large dnode code #6262
Fix dnode_hold() freeing dnode behavior #8172
Fix dnode allocation race #6414, #6439
Partial: Raw sends must be able to decrease nlevels #6821, #6864
Remove unnecessary txg syncs from receive_object() Closes#7197
This updates FreeBSD large_dnode code (that was imported from ZoL) to a version
that was committed to illumos. It has some cleanups, improvements and fixes
comparing to what we have in FreeBSD now. I think that the most significant
update is 8199 multi-threaded dmu_object_alloc().
Obtained from: illumos
MFC after: 3 weeks
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS. In most cases IAS- and GNU as-assembled boot components were
identical, and CLANG_NO_IAS was already removed from other components.
Clang IAS produces different output for some components, including
boot2, so CLANG_NO_IAS was not previously removed for those.
In the case of boot2 the difference is that IAS produces a larger
encoding for one instruction (the testb at the beginning of read).
GNU as produces:
2e f6 06 b0 08 80
while IAS includes an address size override prefix (67) and produces:
2e 67 f6 05 b3 08 00 00 80
This results in three fewer NOPs elsewhere in boot2 but no functional
change, so switch to IAS for boot2.
(We can separately pursue improved 16-bit IAS support with the LLVM
developers.)
Sponsored by: The FreeBSD Foundation
This restores parity with AMD NTB driver. Though without any drivers
supporting more then one peer and respective KPI modification to pass
peer index to most of the calls this addition is pretty useless now.
MFC after: 2 weeks
Per the July 22, 1999 letter (in /COPYRIGHT) from
William Hoskins
Director, Office of Technology Licensing
University of California, Berkeley
MFC after: 1 week
Some files got their contented duplicated in r345409. Some mistakes where
fixed in r345430. The only file that was left with a duplicated content was
CVE-2019-5598.py.
Reviewed by: kp
Approved by: src (kp)
Differential Revision: https://reviews.freebsd.org/D21267
The entirety of r351061 was a copy/paste error. I'm sorry I've been
comitting so hastily.
Reported by: rpokala
Reviewed by: rpokala
MFC after: 2 weeks
MFC-With: 351061
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21265
The only thing blocking UMA_MD_SMALL_ALLOC from working on 64-bit booke
powerpc was a missing check in pmap_kextract(). Adding DMAP handling into
pmap_kextract(), we can now use UMA_MD_SMALL_ALLOC. This should improve
performance and stability a bit, since DMAP is always mapped in TLB1, so
this relieves pressure on TLB0.
MFC after: 3 weeks
expression howmany(BBSIZE, PAGE_SIZE), where BBSIZE is the size of the
boot block area. That can be less than 2 if PAGE_SIZE is big.
swapon(8) has an option to trim (delete) all the blocks of a device at
startup. However, if the first of those blocks is a bsd label, then
trimming those blocks is destructive. Change swapon to leave the
first BBSIZE bytes untrimmed.
Update manual pages to reflect changes in how swapon and how it may be
used, espeically in association with savecore.
Reviewed by: alc
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21191
No functional change.
Add a verbose comment giving an example side-by-side comparison between the
prior and Concurrent modes of Fortuna, and why one should believe they
produce the same result.
The intent is to flip this on by default prior to 13.0, so testing is
encouraged. To enable, add the following to loader.conf:
kern.random.fortuna.concurrent_read="1"
The intent is also to flip the default blockcipher to the faster Chacha-20
prior to 13.0, so testing of that mode of operation is also appreciated.
To enable, add the following to loader.conf:
kern.random.use_chacha20_cipher="1"
Approved by: secteam(implicit)
enough that unification will have to wait for the next pass.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
specific, and only builds there. Likewise the module is built there. Move it to
the x86-only files.x86.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
Apart from one MD file, ACPI is a x86 implementation, not specific to either
i386 or amd64, so put it into files.x86. Other architectures include fewer
files for the same options, so it can't move into the MI files file.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
VIA Padlock support is for VIA C3, C7 and Eden processors, which are 64bit x86
processors.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
The HPT drivers are all x86 only. Move them to files.x86. Because of the way we
run uudecode, we can use $M instead of needing entries for them in separate
files.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
Move all the identical x86 lines to files.x86. The non-identical ones should be
unified and moved as well, but that would require additional changes that would
need a more careful review and may not be MFCable, so I'll do them
separately. I'll delete the mildly snarky comment when things are unified.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
