7571 Commits

Author SHA1 Message Date
peter
e1c760e0f9 Remove the curproc printing on trap/interrupt/etc. It's outlived it's
usefulness, and there were problems with it anyway.

Found by: bde
1997-04-26 19:12:03 +00:00
fsmp
7704de811a #if'ed out the '#include "opt_smp.h"' line.
The SMP source was merged into 3.0-current last nite and this broke
the make of sbin/dset.

Should make things work for non-SMP case.

People making SMP kernels will need to edit i386/isa/isa_device.h, re-enabling
'#include "opt_smp.h"'.  People making SMP worlds will have to punt for now...
I'm thinking about the real solution, but for now the goal is to NOT break
the world!
1997-04-26 19:07:36 +00:00
peter
3558cef4bd Back out bogus code that slipped past my read of the pre-merge diff
(Problems noted by Bruce)
1997-04-26 18:59:42 +00:00
peter
94ca6755e4 Fix some SMP merge bugs (from Bruce) -
#include out of order
pccard_configure() called twice
munged tab (existing problem made worse)
1997-04-26 18:57:34 +00:00
peter
37a61dfff7 Create sysctl kern.fast_vfork, on for uniprocessor by default, off for
SMP.
1997-04-26 15:59:50 +00:00
peter
2db802b49a Disable RFMEM in vfork for smp case.. It doesn't seem to work too well
yet..
1997-04-26 14:31:36 +00:00
kato
f90d800c9a Do nothing instead of adjusting un_flags when (uppervp is locked) &&
(UN_ULOCK is not set) in union_lock.  This condition may indicate
race.  DIAGNOSTIC kernel still panic here.
1997-04-26 13:43:25 +00:00
peter
6323aa10bf Man the liferafts! Here comes the long awaited SMP -> -current merge!
There are various options documented in i386/conf/LINT, there is more to
come over the next few days.

The kernel should run pretty much "as before" without the options to
activate SMP mode.

There are a handful of known "loose ends" that need to be fixed, but
have been put off since the SMP kernel is in a moderately good condition
at the moment.

This commit is the result of the tinkering and testing over the last 14
months by many people.  A special thanks to Steve Passe for implementing
the APIC code!
1997-04-26 11:46:25 +00:00
gibbs
96efe480c0 Print out some more diagnostic information when we reject a message.
When we request sense, don't allow disconnection.  This closes a window
where we might allow an overlapped tagged and non-tagged transaction.
The correct fix is to freeze the queue for the target that requests sense
which is what will happen in the new CAM framework.
1997-04-26 05:03:18 +00:00
kato
f18676ff22 Do not clear UN_ULOCK in certain case.
Our vput calls vm_object_deallocate() --> vm_object_terminate().  The
vm_object_terminate() calls vn_lock(), since UN_LOCKED has been
already cleared in union_unlock().  Then, union_lock locks upper vnode
when UN_ULOCK is not set.  The upper vnode is not unlocked when
UN_KLOCK is set in union_unlock(), thus, union_lock tries to lock
locked vnode and we get panic.
1997-04-26 04:09:40 +00:00
kato
80b96ecb2f Add new cpu type, CPU_CY486DX, which shows Cyrix 486S/DX series CPUs,
and initialization routine for those CPUs.

Tested by:	Bob Bishop <rb@gid.co.uk>
1997-04-26 04:08:54 +00:00
kato
fae9d8a74a Synchronize with sys/i386/boot/biosboot/Makefile and
sys/i386/boot/rawboot/Makefile revsions 1.56 and 1.7, respectively.
1997-04-26 04:00:25 +00:00
bde
6b593dbda8 Removed LDADD=-lc and associated DPADD. libc would probably break
things if it were actually used.
1997-04-25 19:38:01 +00:00
dfr
d127247cc9 Don't zero b_dirtyoff and b_dirtyend on error.
Submitted by:	Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
1997-04-25 11:14:00 +00:00
peter
74f136022f copyin the export network mask to the correct variable.
Submitted by: Mike Hibler <mike@marker.cs.utah.edu>, PR#3380
1997-04-25 06:47:12 +00:00
gibbs
3ca5733308 The following scenario would result in a bogus residual being reported
if SCB Paging was enabled:

    disconnect with more data to transfer
    disconnected SCB gets paged out
    target reconnects so we page SCB back in
    target completes transfer so residual is 0
    target disconnects
    SCB gets reused but not paged out since the residual is 0 (optimization)
    target reconnects so we page the SCB back in
    we report a residual because of stale residual information.

The fix for this is to set a flag that forces the SCB to be paged back
up to the host if we page in an SCB with a residual

Pointed out by: Doug Ledford <dledford@dialnet.net>
1997-04-24 16:52:18 +00:00
se
96ee89db8a Add definition of PCI_SUBID_REG2, the subvendor/device ID for
a header type 2 device.
1997-04-24 08:03:31 +00:00
ache
e027b68ed8 Restore memory space separation (RFMEM) for vfork() after
shell imgact memory clobbering fixed
1997-04-23 22:13:18 +00:00
ache
2f86c7eb15 Don't clobber user space argv0 memory on shell exec, mainly for vfork()
Fix another bug: if argv[0] is NULL, garbadge args might be added for
shell script
Submitted by: Tor Egge <Tor.Egge@idi.ntnu.no> (with yet one fault detect from me)
1997-04-23 22:07:05 +00:00
ache
4edae968dd Add argv0 field for imgact structure - for replacing argv0 in shell
image activator
Submitted by:  Tor Egge <Tor.Egge@idi.ntnu.no>
1997-04-23 22:02:37 +00:00
se
0ea0f813c5 Add preliminary support for PCI config header type 2:
Fetch subvendor/device ID from config space register 0x40.
1997-04-23 19:43:20 +00:00
bde
2fefab8f6a Fixed longstanding profiling bug. The frame pointer wasn't set up
for syscalls, so one frame was lost in backtraces from syscalls.
This is handled better in the kernel by using a different mcount
entry point for profiling before the frame pointer is set up.

Expand RCSID().

Use .p2align instead of the ambiguous .align.

Added idempotency ifdef.

Removed unused macros ALTENTRY(), ALTASENTRY(), ASENTRY(), _MID_ENTRY.

Cleaned up formatting.

Reviewed by:	jdp reviewed an old version
Obtained from:	parts from NetBSD
1997-04-23 19:26:04 +00:00
dyson
5b65518b88 Give up on the fast vfork() for a while. 1997-04-23 01:59:14 +00:00
dg
f096e34225 Check that the received packet length indicated by the card is at least
large enough to contain the ethernet header. There appears to be a
condition where the card can return "0" in some failure cases, and this
causes bad things to happen (a panic).
1997-04-23 01:44:30 +00:00
dfr
5a956ea098 Fix broken usage of nm_readdirsize and increase the socket buffers for UDP
to prevent possible socket overflows.

2.2 candidate.

PR:		kern/3304
Reviewed by:	Thomas David Rivers <ponds!rivers@dg-rtp.dg.com>
1997-04-22 17:38:01 +00:00
kato
7f07863164 Synchronize with sys/i386/conf/Makefile.i386, sys/i386/i386/machdep.c
and sys/i386/isa/npx.c revisions 1.94, 1.238 and 1.41, respectively.
1997-04-22 12:20:50 +00:00
jdp
ae3a563c6e Make the necessary changes so that an ELF kernel can be built. I
have successfully built, booted, and run a number of different ELF
kernel configurations, including GENERIC.  LINT also builds and
links cleanly, though I have not tried to boot it.

The impact on developers is virtually nil, except for two things.
All linker sets that might possibly be present in the kernel must be
listed in "sys/i386/i386/setdefs.h".  And all C symbols that are
also referenced from assembly language code must be listed in
"sys/i386/include/asnames.h".  It so happens that failure to do
these things will have no impact on the a.out kernel.  But it will
break the build of the ELF kernel.

The ELF bootloader works, but it is not ready to commit quite yet.
1997-04-22 06:55:47 +00:00
yokota
a2809a2bed Fixed typo in the set_keyboard_param().
Spotted by: Philippe Charnier@xp11.frmug.org
1997-04-22 02:04:15 +00:00
kato
e696227ac2 Dirty change in union_lock(). Sometimes upper vnode is locked without
UN_ULOCK flag.  This shows a locking violation but I couldn't find the
reason UN_ULOCK is not set or upper vnode is not unlocked.  I added
the code that detect this case and adjust un_flags.  DIAGNOSTIC kernel
doesn't adjust un_flags, but just panic here to help debug by kernel
hackers.
1997-04-21 15:32:24 +00:00
peter
4997aa77f1 Send this to the Attic so there's no mixups over which kern_lock.c is in
use in -current.
1997-04-21 13:39:56 +00:00
nate
01b6917a11 - Better fix for 3C589D support. Revert previous changes and add a
delay after we reset the card to allow the card to come back to life.
  It appears the newer card takes longer to reset.

Submitted by:	Samuel Lam <skl@ScalableNetwork.com>
1997-04-21 13:38:32 +00:00
kato
e2eb0e3743 Replace VOP_LOCK with vn_lock. 1997-04-21 12:40:42 +00:00
kato
591065bf82 Synchronize with sys/i386/isa/lpt.c revision 1.60. 1997-04-21 12:33:26 +00:00
kato
c21bde24da Synchronize with sys/i386/isa/syscons.c.revision 1.210. 1997-04-21 12:31:31 +00:00
bde
f55a113951 Fixed the type of a timeout function and removed casts that hid the
type mismatches.  There was no problem in practice (at least on 386's).
The timeout args still get bogusly cast from int to `void *' via
caddr_t and back to int.
1997-04-20 18:02:40 +00:00
bde
1dcbd56e34 Fixed the type of timeout functions and removed casts that hid the
type mismatches.  mcd and scd were/are particularly bogus.  They
used a general purpose function taking 2 args for the timeout
function and fudged varargs stuff to supply the second arg for the
timeout case.  This broke `cc -mrtd'.  Bounce through a timeout
function instead.  The timeout arg still gets bogusly cast from
int to `void *' and back.
1997-04-20 17:26:55 +00:00
dyson
5cd49302ac Fix both a problem with accessing backing objects, and also release
the process map on nonexistant pages.
PR:		kern/3327
Submitted by:	Tor Egge <Tor.Egge@idi.ntnu.no>
1997-04-20 17:12:11 +00:00
dyson
d5d1e49215 Re-institute the efficent version of vfork. It appears to make a
difference of approx 3mins in make world on my P6!!!  This means
that vfork now has full address space sharing, so beware with
sloppy vfork programming.  Also, you really do need to apply
the previously committed popen fix in libc.
1997-04-20 16:57:12 +00:00
bde
020410f641 Fixed the type of timeout functions and removed casts that hid the
type mismatches.  Not taking an arg in sequencer_timer() broke
`cc  -mrtd'.
1997-04-20 16:54:58 +00:00
bde
2d072e5f9d Fixed the type of timeout functions and removed casts that hid the
type mismatches.  There was no problem in practice (at least on 386's).

Don't cast NULL in calls to timeout functions.  pcvt is fully prototyped
and doesn't support K&R.

Timeout functions take args of type `void *', so use magic numbers of
type `void *' for UPDATE_* to reduce the danger of wrong conversions.

Removed FreeBSD-pre-1.1-related TIMEOUT_FUNC_T macro.  It was especially
bogus for the pre-1.1 case.
1997-04-20 16:38:22 +00:00
bde
8784b3f4e8 Fixed the type of timeout functions and removed casts that hid the
type mismatches.  Not taking an arg in scrn_timer() broke `cc -mrtd'.
1997-04-20 16:05:33 +00:00
bde
f477b66143 Fixed the type of timeout functions and removed casts that hid the
type mismatches.  There was no problem in practice (at least on 386's).

Removed NetBSD-related TIMEOUT macro.  NetBSD uses the same BSD4.4Lite
timeout interface as FreeBSD.  As a concession to portability, declare
the timeout function without using the FreeBSD timeout_t typedef.
1997-04-20 15:48:17 +00:00
bde
7963d92bf1 Fixed the type of timeout functions and removed casts that hid the
type mismatches.  There was no problem in practice (at least on 386's).
1997-04-20 15:36:12 +00:00
bde
e34af1091c Fixed inconsistent extern declaration of a timeout function and
removed a cast that helped hide the problem.  There was no problem
in practice (at least on 386's).
1997-04-20 15:25:33 +00:00
bde
09b8b5d768 Fixed linting of and compilation of the gcc byte-swapping macros
properly.  Simply don't use the gcc macros if we're not gcc, and
declare prototypes for the byte-swapping functions in case the
macro versions are not used.  The previous fix was wrong and broke
libpcap, which abuses -Dlint.

Don't pollute the namespace if _POSIX_SOURCE is defined.  This is
broken - it makes almost everything in <machine/endian.h> inaccessible
if _POSIX_SOURCE is defined, yet <machine/endian.h> is not a POSIX
header.  Other systems don't do it any better.

Removed always-false `BYTE_ORDER == BIG_ENDIAN' ifdef.
Obtained from:	partly from Lite(2?) and NetBSD
1997-04-20 11:44:32 +00:00
phk
8f01634fd1 1. i82365.h: Chip identifiers should not be #ifdef PC98. Add identifier
(pt. unused) for TI PCI1130.

2. pccard.c: PCIC_RESUME_RESET is now (also) a sysctl.  (Never make it
    a #ifdef if it can be made a sysctl!)

3. pcic.c: make getb() and putb() proper member functions of struct
    pcic_slot.  Add a couple of missing casts.
1997-04-20 07:21:12 +00:00
phk
1be613d0b3 The bit of the cardbus bridge support code se and I have been able to agree
on so far... :-)
Reviewed by:	se
1997-04-20 06:57:43 +00:00
phk
7d2d8c582b Fix up the "hlt vector" change I made.
Reviewed by:	bde, bde, bde
1997-04-20 06:41:26 +00:00
kato
fcb0975252 Synchronize with sys/i386/isa/diskslice_machdep.c revision 1.25. 1997-04-20 05:16:06 +00:00
kato
ac1dfd7ec8 Synchronize with sys/i386/isa/sio.c revision 1.163. 1997-04-19 14:54:32 +00:00