Check licensing support at NIC startup to avoid multiple checks later.
As state is stored, licensing initialisation is moved later in start
procedure.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6385
Centralizes fetching of board information (vendor, type, revision, etc),
and adds support for matching quirks against board identification info.
* Adds a BHND_BUS_READ_BOARD_INFO(), allowing bhnd bus/bus parent(s) to
handle implementation-specific fetching of board info.
* Integrates board type constants from the latest Broadcom ISC-licensed
bcmdevs.h included in dd-wrt's Broadcom driver source drops.
* Adds support for matching on chip/board quirks to bhnd_device_quirks()/
bhnd_chip_quirks().
* Use the new board/chip quirk matching to match Apple devices that failed
to set BFL2_PCIEWAR_OVR in SROM.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6361
Relies on BHND(4) driver.
There files contains machine-dependent code for Broadcom MIPS processor and
provide UART driver.
This is a work in progress; it and the current bhnd code is enough to boot
on the ASUS RT-N16 and RT-N53 platforms.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6251
This patch fix trampoline build. inckern.S increases stack and calls _startC
of elf_trampoline, so inckern.S should be called before elf_trampoline. gcc4.2 puts
text (code) into image according to order of source files in this call, so order has changed.
In addition make will install trampoline kernel. It allows to use kernel for firmware build.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6242
There are 5 logging levels:
* ERROR
* WARN
* INFO
* DEBUG
* TRACE
There are 2 logging context:
* with
* without device
DEBUG and TRACE records are printed only if bootverbose.
Logging records are printed with source code line information if acceptable
logging level is DEBUG or TRACE.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6247
Extend macros for MIPS & ARM cores. Now only BCM cores can be matched by matching mechanism.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6246
freeaddrinfo() on it to indicate that it doesn't point to a valid
addrinfo list. This fixes this Coverity issues:
1006368 Uninitialized pointer read
1018506 Double free
1305590 Resource leak
that can be triggered in the hp->hostname[0] != '\0' case.
Don't treat a character as a boolean.
Fix these Coverity issues:
1009293 Unchecked return value from library
1194246 Wrong size argument
by tweaking the status file extend code.
Reported by: Coverity
CID: 1006368, 1018506, 1305590, 1009293, 1194246
Reviewed by: rmacklem
Feedback from: hrs
MFC after: 1 week
Differential Revision: D6398
previous line to prevent buffer overflow. This turns out to not be
important because the upstream xdr code already capped the object
size at the proper value. Using the correct limit here looks a lot
less scary and should please Coverity.
Reported by: Coverity
CID: 1199309, 1199310
MFC after: 1 week
This is an updated version of D6140.
Tested:
* BCM4321 11abgn, STA mode (11a)
Submitted by: avos
Differential Revision: https://reviews.freebsd.org/D6140
Some ACPI operations such as mutex acquires and event waits accept a
timeout. The ACPI OSD layer implements these timeouts by using regular
sleep timeouts. However, this doesn't work during early boot before
event timers are setup. Instead, use polling combined with DELAY()
to spin.
This fixes booting on upcoming Intel systems with Kaby Lake processors.
Tested by: "Jeffrey E Pieper" <jeffrey.e.pieper@intel.com>
Reviewed by: jimharris
MFC after: 1 week
* DUALPHY in TGSHIGH tells us there's a phy that is dualband, rather than
two separate PHYs/MACs (which we almost but don't quite yet support.)
Use it.
* Add the BCM4322 PCI ID to the list of devices we don't override.
This means the 2g/5g flags are preserved, and thus we get 5GHz
operation (with N-PHY, of course.)
Tested:
* BCM4311, STA mode (11bg)
* BCM4312, STA mode (11bg)
* BCM4321, STA mode (11abg)
Sponsored by: Palm Springs
* unbreak non-debug builds - don't default to debugging SCAN; that was
left-over from my testing.
* include opt_siba.h, now that it's generated as appropriate.
* stick the debug enum outside the debug block, just so it's there for
any code that wants to set siba_debug for some reason (like say,
my debugging muckup.)
* make DPRINTF() use __VA_ARGS__ for formatting too, so it correctly
handles printing w/ no args.
* Make DPRINTF() use device_printf().
Sponsored by: Palm Springs
Coverity reports an uninitialized "dir" in case the switch defaults
without hitting any case. Respect the original intent and quell the
false positive with the relatively new __unreachable() builtin.
CID: 1331566
Coverity reports an uninitialized "len" in case the switch defaults
without hitting any case. Respect the original intent and quell the
false positive with the relatively new __unreachable() builtin.
CID: 1347796
This are based on Mach3.
Documentation is pending but has been promised.
Submitted by: Dan Partelly
Reviewed by: adrian, jhb (older version)
Differential Revision: https://reviews.freebsd.org/D4230
RelNotes: yes
so the module could be loaded.
Discussed with: andrew
Reviewed by: andrew
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D6359
That was just wrong. In fact, we can safely keep this static entry when
it's inactive.
Now the destructive action is moved to the reclaim method and the
function is renamed from zfsctl_snapdir_inactive(0 to
zfsctl_snapdir_reclaim().
Also, we can use gfs_vop_reclaim() instead of gfs_dir_inactive() +
kmem_free().
Lastly, we can just assert that the node does not any children when it
is reclaimed, even on the force unmount. That's because zfs_umount()
does an extra vflush() pass which should destroy all snapshot-mountpoint
vnodes that are the snapdir's children.
MFC after: 5 weeks
Those vnodes should not linger. "Stale" nodes may get out of
synchronization with actual snapshots. For example if we destroy a
snapshot and create a new one with the same name. Or when we rename a
snapshot.
While there fix the argument type for zfsctl_snapshot_reclaim().
Also, its original argument can be passed to gfs_vop_reclaim() directly.
Bug 209093 could be related although I have not specifically verified
that. Referencing just in case.
PR: 209093
MFC after: 5 weeks
Dropping the root vnode's lock after VFS_ROOT() didn't really help the
fact that we acquired the lock while holding its child's, .zfs, lock
while performing the operaiton.
So, directly use zfs_zget() to get the root vnode.
While there simplify the code in zfsctl_freebsd_root_lookup.
We know that .zfs is always exclusively locked.
We know that there is already a reference on *vpp, so no need for an
extra one.
Account for the fact that .. lookup may ask for a different lock type,
not necessarily LK_EXCLUSIVE. And handle a possible failure to acquire
the lock given the lock flags.
MFC after: 5 weeks
In fact, that was dangerous. For example, zfsctl_snapshot_reclaim()
calls gfs_dir_lookup() on ".." path and that ends up calling
gfs_lookup_dot() which violated locking order by acquiring the parent's
directory vnode lock after the child's vnode lock.
Also, the previous behavior was inconsistent as gfs_dir_lookup()
returned a locked vnode for . and .. lookups, but not for any other.
Now gfs_lookup_dot() just references a resulting vnode and the locking
is done in its consumers, where necessary.
Note that we do not enable shared locking support for any gfs / zfsctl
vnodes.
This commit partially reverts r273641.
MFC after: 5 weeks
The former acquired a snap vnode lock while holding sd_lock while the
latter does the opposite.
The solution is drop sd_lock before acquiring the vnode lock. That
should be okay as we are still holding a lock on the 'snapshot'
directory in the exclusive mode. That lock ensures that there are no
concurrent lookups in the directory and thus no concurrent mount attempts.
But now we have to account for the possibility that the snap vnode
might get reclaim after we drop sd_lock and before we can get
the node lock. So, check for that case and retry.
MFC after: 5 weeks
MSI or MSI-X interrupts, however this is enought to boot FreeBSD under the
ARM Foundation Model with a GICv3 interrupt controller.
Approved by: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
This should fix the build on older stable/10, since install is a bootstrap
tool.
Pending a decision how to fix this properly, revert utimensat usage. Copies
with the -p option will again appear older than the original almost always,
but -p is not commonly used.
