Inputting fractional non-decimal numbers has never worked correctly in our
OpenBSD-derived dc(1). It truncates the input to a number of decimal places
equal to the number of hexadecimal (or whatever base) places given on the
input. That's unacceptable, because many numbers require more precision to
represent in base 10 than in their original bases.
Fix this bug by using as many decimal places as needed to represent the
input, up to the maximum of the global scale factor.
This has one mildly surprising side effect: the scale of a number entered in
non-decimal mode will no longer necessarily equal the number of hexadecimal
(or whatever base) places given on the input. I think that's an acceptable
behavior change, given that inputting fractional non-decimal numbers never
worked in the first place, and the man page doesn't specify whether trailing
zeros on the input should affect a number's scale.
PR: 206230
Reported by: nibbana@gmx.us
Reviewed by: pfg
Differential Revision: https://reviews.freebsd.org/D13336
sponge(1) is a utility that reads input until
complete, then opens the output file, then
writes to it. This makes it useful in pipelines
that read and write to the same file.
Reviewed by: wblock, jilles, imp, cem, danfe (all: various iterations)
Inspired by: https://joeyh.name/code/moreutils/
only.
In case we are trying to read a catpage, the manpage variable is not defined.
It results in the "cattool" having no arguments.
In case the catpage is compressed, the cattool used is "zcat" which dies if the
standard input is a terminal, meaning the function calling it is exiting as if
there were no ".so"
In case the catpage is uncompressed, the cattool used is "zcat -f" which waits
reading standard input, making the man(1) command hang.
PR: 223560
Reported by: wosch
MFC after: 3 days
The copyright notice was erroneously introduced as one from the NetBSD
foundation due to it being copied from a file in the NetBSD test suite, but
this file itself is not derived from or supplied with the NetBSD test suite.
MFC after: 3 days
Based on the patch by: Pawel Biernacki <pawel.biernacki@gmail.com>
Sponsored by: Mysterious Code Ltd. (Pawel),
The FreeBSD Foundation (me)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13228
Add basic command line parsing test coverage for these utilities. The tests
were automatically generated based on their man pages. These tests can be
expanded by hand for more thorough coverage. The aim is to generate very
basic amount of test coverage for all the utilities in the base system.
Tests generated via: https://github.com/shivansh/smoketestsuite/
Submitted by: shivansh
Reviewed by: asomers
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D12424
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
- Add a new KTR_STRUCT_ARRAY ktrace record type which dumps an array of
structures.
The structure name in the record payload is preceded by a size_t
containing the size of the individual structures. Use this to
replace the previous code that dumped the kevent arrays dumped for
kevent(). kdump is now able to decode the kevent structures rather
than dumping their contents via a hexdump.
One change from before is that the 'changes' and 'events' arrays are
not marked with separate 'read' and 'write' annotations in kdump
output. Instead, the first array is the 'changes' array, and the
second array (only present if kevent doesn't fail with an error) is
the 'events' array. For kevent(), empty arrays are denoted by an
entry with an array containing zero entries rather than no record.
- Move kevent decoding tables from truss to libsysdecode.
This adds three new functions to decode members of struct kevent:
sysdecode_kevent_filter, sysdecode_kevent_flags, and
sysdecode_kevent_fflags.
kdump uses these helper functions to pretty-print kevent fields.
- Move structure definitions for freebsd11 and freebsd32 kevent
structures to <sys/event.h> so that they can be shared with userland.
The 32-bit structures are only exposed if _WANT_KEVENT32 is defined.
The freebsd11 structures are only exposed if _WANT_FREEBSD11_KEVENT is
defined. The 32-bit freebsd11 structure requires both.
- Decode freebsd11 kevent structures in truss for the compat11.kevent()
system call.
- Log 32-bit kevent structures via ktrace for 32-bit compat kevent()
system calls.
- While here, constify the 'void *data' argument to ktrstruct().
Reviewed by: kib (earlier version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12470
Patches with very little context (-U0 and -U1) could get misapplied if
the file to be patched changes and a hunk is no longer applicable. Matching
with fuzz would be attempted and default to a match when we unexpectedly ran
out of context.
This also affected patches with higher levels of context but had limited
actual context due to the hunk being located near the beginning/end of file.
PR: 74127, 223545 (exp-run)
Reviewed by: emaste, pfg
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12631
Following struct vmtotal changes, make systat use and correctly
display 64-bit counters. Switch to humanize_number(3) to overcome
homegrown arithmetics limits in pretty printing large numbers. Use
1024 as a divisor for memory fields to make it consistent with other
tools and users expectations.
Submitted by: Pawel Biernacki <pawel.biernacki@gmail.com>
Sponsored by: Mysterious Code Ltd.
PR: 2137
Differential revision: https://reviews.freebsd.org/D13105
Previously it was enabled by WITH_/WITHOUT_TOOLCHAIN, but it is commonly
expected to be available and may have non-toolchain consumers. As it
is now taken from the BSD-licensed ELF Tool Chain project, just install
it unconditionally.
PR: 213665, 223725
Reviewed by: bdrewery
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8398
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
The traditional / legacy usage should still be supported.
This fixes a regression in r324619 that introduced a nicer, verb based
interface.
Reviewed by: brooks
X-MFC with: r324619
xlint is currently a fossil. We have much more useful and alive tools
to do now what xlint did twenty years ago.
I did not cleared some stuff which makes lint operational, in
sys/x86/include and sys/sys, but I might do it as followup. The
x86/include/ucontext.h and _types.h hacks made to please lint was the
main reason for my initial proposal to classify xlint as obsolete and
to remove it.
Also I do not intend to clear sccs ids.
Reviewed by: bapt, brooks, emaste, jhb, pfg
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13015
Humour is a funny thing. What is funny to one person is not funny to all
people. What is insightful to one person is similarly not universal. The
fortune datfiles have been around a long time and have undoubtedly amused
people but it's time to acknowledge their subjective, and in some cases
at least potentially offensive, nature and stop distributing them with the
imprimatur of the FreeBSD project.
If anyone wishes to distribute these via other mechanisms they are welcome to
check them out of history and do so.
MFC after: 2 days
when a directory is removed in the middle of find.
Instead of a full err(), allow find to continue, plus print a warning with
exitstatus set when appropriate.
Reported by: 100.chksetuid via gordon
Reviewed by: jilles
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D13024
In the libxo output from vmstat, the number of pages that have been
paged out uses the same key name as the number of times pages have been
paged. Appears to have been a typo or copy-pasto.
PR: 222198
Submitted by: Yavuz Tanriverdi <stemix@gmail.com>
Reviewed by: phil, garga
Differential Revision: https://reviews.freebsd.org/D12395
The information here is somewhere between ancient to obsolete.
It refers to a time in the internet's history when manual routing
was still useful, talks about UUCP as if its modern, and refers
to documents which I had trouble tracking down.
It seems unlikely that a manual page in this form would be useful, so
just remove it.
Reviewed By: imp, tsoome, bdrewery(?)
Differential Revision: https://reviews.freebsd.org/D12924
