Commit Graph

15880 Commits

Author SHA1 Message Date
bapt
82f995d6f3 Make sure SIZE is defined early 2014-10-10 06:09:47 +00:00
jhb
1a90cf59cd Forgot to bump Dd.
Pointy hat to:	jhb
2014-10-08 21:56:00 +00:00
jhb
dada10fe68 Rewrite timeout(9) to be callout(9)-centric instead. Move the description
of timeout(9) to the end and mark it prominently as deprecated.  Document
somewhat how times are specified for the 'sbt' variants.  Better explain
how using callout_init_*() to associate a lock with a callout resolves
common races.

Differential Revision:	https://reviews.freebsd.org/D847
Reviewed by:	wblock, bjk
MFC after:	1 week
2014-10-08 21:53:24 +00:00
yongari
30766cbd51 Document newly added controller AR816x/AR817x. 2014-10-08 05:49:10 +00:00
bdrewery
1a8f3499c2 Bump .Dd missed in r271424 2014-10-06 00:25:10 +00:00
lwhsu
1316135b40 Bump .Dd
Approved by:	kevlo
2014-10-03 15:03:44 +00:00
kevlo
d0c5e279ae bump .Dd
Reported by:	gjb
2014-10-03 01:39:33 +00:00
kevlo
fb00cb662a Mention umoscom(4) and uslcom(4). 2014-10-03 01:20:49 +00:00
gavin
ee3a69c548 Add HARDWARE section of urnis(4) driver to try to gain more visibility.
MFC after:	3 days
2014-10-02 22:22:34 +00:00
gjb
2c6335516d Merge the following revisions from ^/projects/release-vmimage:
r272234, r272236, r272262, r272264, r272269, r272271, r272272,
r272277, r272279, r272376, r272380, r272381, r272392, r272234,
r272412:

r272234:
  Initial commit to include virtual machine images as part
  of the FreeBSD release builds.

  This adds a make(1) environment variable requirement,
  WITH_VMIMAGES, which triggers the virtual machine image
  targets when not defined to an empty value.

  Relevant user-driven variables include:

   o VMFORMATS:	The virtual machine image formats to create.
     Valid formats are provided by running 'mkimg --formats'

   o VMSIZE:	The size of the resulting virtual machine
     image.  Typical compression is roughly 140Mb, regardless
     of the target size (10GB, 15GB, 20GB, 40GB sizes have been
     tested with the same result).

   o VMBASE:	The prefix of the virtual machine disk images.
     The VMBASE make(1) environment variable is suffixed with
     each format in VMFORMATS for each individual disk image, as
     well as '.img' for the source UFS filesystem passed to
     mkimg(1).

  This also includes a new script, mk-vmimage.sh, based on how
  the VM images for 10.0-RELEASE, 9.3-RELEASE, and 10.1-RELEASE
  were created (mk-vmimage.sh in ^/user/gjb/thermite/).

  With the order in which the stages need to occur, as well as
  sanity-checking error cases, it makes much more sense to
  execute a shell script called from make(1), using env(1) to
  set specific parameters for the target image than it does to
  do this in make(1) directly.

r272236:
  Use VMBASE in place of a hard-coded filename in the CLEANFILES
  list.

r272262:
  Remove a 'set -x' that snuck in during testing.

r272264:
  release/Makefile:
    Connect the virtual machine image build to the release
    target if WITH_VMIMAGES is set to a non-empty value.

  release/release.sh:
    Add WITH_VMIMAGES to RELEASE_RMAKEFLAGS.

  release/release.conf.sample:
    Add commented entries for tuning the release build if the
    WITH_VMIMAGES make(1) environment variable is set to
    a non-empty value.

r272269:
  release/Makefile:
    Include .OBJDIR in DESTDIR in the vm-base target.

  release/release.sh:
    Provide the full path to mddev.

r272271:
  Fix UFS label for the root filesystem.

r272272:
  Remove comments left in accidentally while testing, so the
  VM /etc/fstab is actually created.

r272277:
  Remove the UFS label from the root filesystem since it is added
  by mkimg(1) as a gpt label, consistent with the fstab(5) entry.

r272279:
  Comment cleanup in panic() message when mkimg(1) does not support
  the requested disk image format.

r272376:
  Separate release/scripts/mk-vmimage.sh to machine-specific
  scripts, making it possible to mimic the functionality for
  non-x86 targets.

  Move echo output if MAKEFLAGS is empty outside of usage().

  Remove TARGET/TARGET_ARCH evaluation.

r272380:
  Avoid using env(1) to set values passed to mk-vmimage.sh,
  and instead pass the values as arguments to the script,
  making it easier to run this by hand, without 'make release'.

  Add usage_vm_base() and usage_vm_image() usage helpers.

r272381:
  After evaluating WITH_VMIMAGES is non-empty, ensure
  the mk-vmimage.sh script exists before running it.

r272392:
  Add WITH_COMPRESSED_VMIMAGES variable, which when set enables
  xz(1) compression of the virtual machine images.

  This is intentionally separate to allow more fine-grained
  tuning over which images are compressed, especially in cases
  where compressing 20GB sparse images can take hours.

r272412:
  Document the new 'vm-image' target, and associated release.conf
  variables.

r272413:
  Remove two stray comments added during the initial iterations
  of testing, no longer needed.

MFC after:	5 days
X-MFC-10.1:	yes
Tested on:	r272269, r272272, r272279, r272380, r272392
Sponsored by:	The FreeBSD Foundation
2014-10-02 16:13:12 +00:00
hselasky
cde325445b Add new USB ID.
PR:		194091
MFC after:	3 days
2014-10-02 12:27:41 +00:00
hrs
667a2b7369 Virtualize lagg(4) cloner. This change fixes a panic when tearing down
if_lagg(4) interfaces which were cloned in a vnet jail.

Sysctl nodes which are dynamically generated for each cloned interface
(net.link.lagg.N.*) have been removed, and use_flowid and flowid_shift
ifconfig(8) parameters have been added instead.  Flags and per-interface
statistics counters are displayed in "ifconfig -v".

CR:	D842
2014-10-01 21:37:32 +00:00
will
b98c483e82 Revise r272363 by collapsing the tests into a for loop.
This has the side effect of ensuring that realpath is also run for the
nominal case of PORTSDIR=/usr/ports (assuming .CURDIR is a ports directory
that relies on /usr/ports but is not rooted in it).  This ensures that any
generated PORTSDIR used is always the actual location.

Submitted by:	jkim (different implementation)
2014-10-01 20:52:08 +00:00
markj
77fb3d6bbe Add a sysctl, net.inet.icmp.tstamprepl, which can be used to disable replies
to ICMP Timestamp packets.

PR:		193689
Submitted by:	Anthony Cornehl <accornehl@gmail.com>
MFC after:	3 weeks
Sponsored by:	EMC / Isilon Storage Division
2014-10-01 18:07:34 +00:00
bjk
b06f292fdc Some cleanup for sfxge.4
Use standard mdoc macros instead of pure roff, fix some other mdoc usage,
make the style consistent, and fix some grammar issues.

Approved by:	hrs (mentor)
2014-10-01 17:16:18 +00:00
andrew
732fbf8303 Clean up detection of big-endian ARM. In all cases we follow the pattern
arm*eb*. Check we are building for arm and if MACHINE_ARCH follows this
pattern.
2014-10-01 16:00:21 +00:00
will
2a6acc2651 Always resolve PORTSDIR to absolute paths using realpath(1).
Reported by:	madpilot
Reviewed by:	bapt
X-MFC-With:	272282
2014-10-01 15:02:37 +00:00
andrew
d588d5723d Remove MK_ARM_EABI, the armeb issues have been fixed. The code to support
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.

With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.

X-MFC after:	never
Relnotes:	yes
Differential Revision: https://reviews.freebsd.org/D876
2014-10-01 08:26:51 +00:00
tuexen
911b31bff0 The default for UDPLITE_RECV_CSCOV is zero. RFC 3828 recommend
that this means full checksum coverage for received packets.
If an application is willing to accept packets with partial
coverage, it is expected to use the socekt option and provice
the minimum coverage it accepts.

Reviewed by: kevlo
MFC after: 3 days
2014-10-01 05:43:29 +00:00
markj
39a5d322fa Correct the way that libelf is linked when USDT is used. 2014-10-01 04:28:39 +00:00
gnn
5f81cfe206 Update SolarFlare driver manual page with new tunables.
Submitted by:   Andrew Rybchenko <arybchenko at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
2014-09-30 20:38:36 +00:00
gavin
199abe7b29 Make clear in the ipheth(4) hardware notes that this driver is for the
tethering functionality only.  Add a "bugs" section to give a pointer
to usbconfig set_config if the device isn't automatically detected.

MFC after:	3 days
2014-09-30 05:36:16 +00:00
will
57c53dc77d Search for the nearest PORTSDIR where Mk/bsd.ports.mk exists, from .CURDIR.
This will only take effect if PORTSDIR is not set, as previously supported.

Use .if exists(), for four specific possibilities relative to .CURDIR:
., .., ../.., and ../../..  The fourth possibility is primarily in case
ports ever grows a third level.  If none of these paths exist, fall back to
the old default of /usr/ports.

This removes the need to set PORTSDIR explicitly (or via wrapper script) if
one is running out of a ports tree that is not in /usr/ports, but in a
home directory.

Reviewed by:	bapt, bdrewery (older version)
CR:		D799
MFC after:	1 week
Sponsored by:	Spectra Logic
2014-09-29 15:05:23 +00:00
pluknet
d22cb816a8 Add smsc(4) to the list of drivers use the miibus interface.
X-MFC with:	r272165
Sponsored by:	Nginx, Inc.
2014-09-26 11:13:19 +00:00
gavin
d9656d90a3 Add MLINKS for if_ipheth(4) and if_smsc(4).
Submitted by:	brueffer
MFC after:	6 days
2014-09-26 09:54:57 +00:00
gavin
b72b8c0a77 Add very basic outline man page for smsc(4).
MFC after:	6 days
2014-09-26 09:19:11 +00:00
gavin
a2605837aa Cross reference cdce(4), ipheth(4) and urndis(4) from each other.
MFC after:	1 week
2014-09-25 14:22:32 +00:00
gavin
05703c5890 Add basic man page for ipheth(4).
MFC after:	1 week
2014-09-25 14:18:34 +00:00
jch
9ef1acd601 Add myself (jch) to calendar.freebsd and committers-src.dot
Approved by:	jhb (mentor)
2014-09-24 22:31:40 +00:00
ngie
21dcd3f250 Improve bsd.progs.mk compatibility with bsd.prog.mk
1. Do not install FILES/SCRIPTS multiple times if PROGS is specified; this is
   already handled via bsd.prog.mk when it's called recursively (PR: 191055,
   191955).
2. Some variables, like BINDIR and PROGNAME, default to a value if unset
   whereas others get appended to, like CFLAGS. Add support for the former case
   (PR: 191056)
3. Make "checkdpadd" and "clean" available targets for recursive execution.

Reviewed by: marcel, sjg
Phabric: D822
PR: 191055, 191056, 191955
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
2014-09-24 04:45:35 +00:00
lwhsu
c6de5315a1 Reflect the chanages in sleepqueue.h and subr_sleepqueue.c
- Priority argument is introduced to sleepq_*wait* in r177085
- sleepq_calc_signal_retval is removed from implementation
- sleepq_catch_signals is internal now

Differential Revision:	https://reviews.freebsd.org/D794
Reviewed by:	jhb
Approved by:	jhb
2014-09-22 19:14:27 +00:00
trasz
fe74bc6163 Add missing mlinks for section 9.
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2014-09-22 13:04:49 +00:00
mav
c4f8e596f6 Mention read_ahead tunables/sysctls.
MFC after:	1 month
2014-09-21 10:05:27 +00:00
ian
2de9b1383f Add a man page for the cgem(4) driver.
Submitted by:	Thomas Skibo <ThomasSkibo@sbcglobal.net>
Reviewed by:	wkoszek@, Yonghyeon PYUN <pyunyh@gmail.com>
2014-09-20 15:45:29 +00:00
gavin
2e6230e0e3 Explain how to load the malo(4) firmware on boot.
PR:		193653
Submitted by:	Juan Ramón Molina Menor
MFC after:	3 days
2014-09-20 00:19:45 +00:00
glebius
72f04611ec Remove ifq_drops from struct ifqueue. Now queue drops are accounted in
struct ifnet if_oqdrops.

Some netgraph modules used ifqueue w/o ifnet. Accounting of queue drops
is simply removed from them. There were no API to read this statistic.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2014-09-19 09:01:19 +00:00
smh
c466dfba5f Remove sys/types.h include as per style (9)
SDT requries sys/param.h due to use of NULL

Reported by:	Garrett
Sponsored by:	Multiplay
2014-09-18 20:38:18 +00:00
smh
7ce047b163 Add dtrace probe support for zfs SET_ERROR(..)
MFC after:	1 week
Sponsored by:	Multiplay
2014-09-18 20:00:36 +00:00
trasz
bdff18c23a Add missing link to TIMEOUT_TASK_INIT(9).
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2014-09-18 13:56:32 +00:00
trasz
80b334e4b4 Add missing links to taskqueue(9).
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2014-09-18 13:39:47 +00:00
araujo
b72df5c2ba The lagg(4) interface is based on trunk(4) interface from OpenBSD.
The FreeBSD is the only system that has the FEC protocol, that is a simple alias
to loadbalance protocol and does not implement the ancient Cisco FEC standard.

From now on, we remove the fec protocol from the documentation and keep the FEC
code only for compatibility.

Phabric:	D539
Reviewed by:	glebius, thompsa
Approved by:	glebius
Sponsored by:	QNAP Systems Inc.
2014-09-18 02:22:02 +00:00
araujo
d7a9c633d7 Add laggproto broadcast, it allows sends frames to all ports of the lagg(4) group
and receives frames on any port of the lagg(4).

Phabric:	D549
Reviewed by:	glebius, thompsa
Approved by:	glebius
Obtained from:	OpenBSD
Sponsored by:	QNAP Systems Inc.
2014-09-18 02:12:48 +00:00
glebius
c360eaa4f1 Add a brief description of CTLFLAG_VNET flag. Since the VIMAGE is
absolutely not documented, I see no reason in long descriptions
here.
2014-09-15 11:14:23 +00:00
allanjude
09c5096c3b Add the new iscsi(4) man page
Cross reference it from iscsid(8) and iscsictl(8)

Reviewed by:	trasz
Approved by:	bcr (mentor), wblock (mentor)
Sponsored by:	ScaleEngine Inc.
CR:		https://reviews.freebsd.org/D741
2014-09-13 18:40:12 +00:00
rodrigc
0e1107608c Propagate the error status of /usr/sbin/bhyve out of the vmrun.sh script.
Clean up the /dev/vmm entry for this VM when vmrun.sh exits.

Reviewed by: neel
Phabric:     D767
2014-09-13 05:08:35 +00:00
delphij
f5cfeab277 Regen. 2014-09-13 02:18:54 +00:00
delphij
edc7ea3a5d Import HyperV Key-Value Pair (KVP) driver and daemon code by Microsoft,
many thanks for their continued support of FreeBSD.

While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.

The HyperV utilities are only built for i386 and amd64 targets.

This is a stable/10 candidate for inclusion with 10.1-RELEASE.

Submitted by:	Wei Hu <weh microsoft com>
MFC after:	1 week
2014-09-13 02:15:31 +00:00
glebius
bda2ab7ec4 - Fix argument list after 271387.
- While here fix typo.

Submitted by:	markj
2014-09-12 08:33:53 +00:00
se
ef76dac419 Add forgotten keymap files fr.kbd and fr.acc.kbd to the FILES list.
Obtained from:	thierry
MFC after:	3 days
2014-09-12 06:23:57 +00:00
np
cc95d45388 cxgbe(4): knobs to enable/disable PAUSE frame based flow control.
MFC after:	1 week
2014-09-12 05:25:56 +00:00