Commit Graph

96753 Commits

Author SHA1 Message Date
Ian Lepore
e347507d5f Add the imx sdhci controller. 2014-02-03 02:52:07 +00:00
Justin Hibbits
c017acc769 Add driver for the ADT7460/ADT7467 fan controller found in later PowerBooks
and iBooks.  Original work by andreast.

MFC after:	1 month
2014-02-03 01:22:50 +00:00
Justin Hibbits
5464324ac6 Add missing file to Makefile.
MFC after:	1 month
X-MFC-with:	261342
2014-02-03 01:16:32 +00:00
Olivier Houchard
d5e7c3b7af Only use the CPU ID register if SMP is defined. Some non-MPCore armv6 cpu,
such as the one found in the RPi, don't have it, and just hang when we try
to access it.
2014-02-02 23:29:51 +00:00
Olivier Houchard
2dfc0cd1b1 Invalidate cachelines for bounce pages on PREREAD too, there may still be
stale entries from a previous transfer.
2014-02-02 22:26:30 +00:00
Ian Lepore
af727bf0d3 Add missing semicolon. 2014-02-02 21:44:04 +00:00
Ruslan Bukin
8c7da46079 o Add prototype for tcon_bypass() used by dcu4
o Add register definition
2014-02-02 21:10:40 +00:00
Olivier Houchard
646b940455 Change the way pcpu and curthread are stored per-core:
the old way was to store pcpu in a register, and get curthread from pcpu,
which is not very atomic, and led to issues if the thread was migrated
to another core between the time we got the pcpu address and the time we
got curthread.
Instead, we now store curthread where pcpu used to be store, and we
calculate the pcpu address based on the cpu id.
2014-02-02 20:58:23 +00:00
Olivier Houchard
006a01df2c Don't call device_set_ivars() for the mmchs, it doesn't seem to be used,
and it overrides the ivars set by the simplebus.
2014-02-02 20:45:41 +00:00
Ruslan Bukin
bb8bc226d3 Add driver for Display Control Unit (DCU4). 2014-02-02 20:25:27 +00:00
Alan Cox
63281952f0 Make prefaulting more aggressive on hard faults. Previously, we would only
map a fraction of the pages that were fetched by vm_pager_get_pages() from
secondary storage.  Now, we map them all in order to avoid future soft
faults.  This effect is most evident when a memory-mapped file is accessed
sequentially.  Previously, there were 6 soft faults for every hard fault.
Now, these soft faults are eliminated.

Sponsored by:	EMC / Isilon Storage Division
2014-02-02 20:21:53 +00:00
Ruslan Bukin
b318fc466d Add support for Colibri VF50 Evaluation Board.
Colibri VF50 is a SODIMM200 Vybrid Family core module
and development board produced by Toradex AG.

Sponsored by:	Machdep, Inc.
2014-02-02 19:35:10 +00:00
Ian Lepore
add35ed5b8 Follow r261352 by updating all drivers which are children of simplebus
to check the status property in their probe routines.

Simplebus used to only instantiate its children whose status="okay"
but that was improper behavior, fixed in r261352.  Now that it doesn't
check anymore and probes all its children; the children all have to
do the check because really only the children know how to properly
interpret their status property strings.

Right now all existing drivers only understand "okay" versus something-
that's-not-okay, so they all use the new ofw_bus_status_okay() helper.
2014-02-02 19:17:28 +00:00
Ruslan Bukin
6f34487cc9 Split kernel configuration to chip common and board specific parts. 2014-02-02 19:13:02 +00:00
Ruslan Bukin
bf636ac469 o Expand device tree information
o Export iomuxc (pins) configuration to DTS
o Allow devices to assign clocks in DTS
2014-02-02 17:48:06 +00:00
Ian Lepore
b4122742a6 Be more robust with malformed interrupt config data. Instead of crashing
or going into a near-infinite loop, warn and make potentially-reasonable
assumptions.
2014-02-02 16:56:40 +00:00
Nathan Whitehorn
52567c06be Fix one remnant endian flaw here. The back-and-forth endian conversions are
confusing.
2014-02-02 16:42:26 +00:00
Nathan Whitehorn
e4be5a1636 Add a set of helpers (ofw_bus_get_status() and ofw_bus_status_okay()) to
process "status" properties of OF nodes.

I've avoided adding new KOBJ methods here so that we don't have to modify
every ofw_bus in the tree. Since 100% of implementations of ofw_bus use
only ofw_bus_gen_*(), it might be worth garbage-collecting the other
methods as well.
2014-02-02 16:41:54 +00:00
Andrey V. Elsukov
51eecdc35a Take exclusive lock only when lle isn't NULL. We don't need write access
to lle in most cases.

MFC after:	1 week
Sponsored by:	Yandex LLC
2014-02-02 07:28:04 +00:00
Nathan Whitehorn
f18ac51a90 Fix missing offset. 2014-02-02 05:52:34 +00:00
Nathan Whitehorn
2b5bab93fb Allow nesting of simplebuses. 2014-02-02 05:41:12 +00:00
Nathan Whitehorn
4a5e35f650 Fix typo. Sorry for breakage! 2014-02-02 05:21:12 +00:00
Bryan Venteicher
54fb8142b6 Use m_defrag() instead of m_collapse() to compact a long mbuf chain
This should be an infrequent occurrence, so remove the per-queue
counters in favor of just global counters in the softc.
2014-02-02 05:20:46 +00:00
Bryan Venteicher
443c3d0bd1 Do not place the sglist used for Rx/Tx on the stack
The sglist segment array has grown to a bit over 512 bytes (on
64-bit system) which is more than ideally should be put on the
stack. Instead allocate an appropriately sized sglist and hang
it off each Rx/Tx queue structure.

Bump the maximum number of Tx segments to 64 to make it unlikely
we'll have defragment an mbuf chain. Our previous count was
rounded up to this value since it is the next power of two, so
effective memory usage should not change.

Also only allocate the maximum number of Tx segments if TSO was
negotiated.
2014-02-02 05:15:36 +00:00
Ian Lepore
37211e7bcd Update all arm code that manipulates the PSR registers to use modern syntax.
It turns out the version of gas we're using interprets the old '_all' mask
as 'fc' instead of 'fsxc'.  That is, "all" doesn't really mean "all".

This was the cause of the "wrong-endian register restore" bug that's
been causing problems with some cortex-a9 chips.  The 'endian' bit in the
spsr register would never get changed (it falls into the 'x' mask group)
and the first return-from-exception would fail if the chip had powered on
with garbage in the spsr register that included the big-endian bit.  It's
unknown why this affected only certain cortex-a9 chips.
2014-02-02 00:48:15 +00:00
Nathan Whitehorn
8279efe54e Switch default Book-E scheduler to ULE, which works now, and enable
CAPABILITIES stuff required to make ssh work.

Hopefully, Book-E can eventually be added to GENERIC, which would avoid
this kind of issue with bitrot. That will require figuring out how to link
Book-E and AIM kernels at the same address, however...
2014-02-01 20:56:50 +00:00
Nathan Whitehorn
a8a9b1c250 ULE works on Book-E since r258002, so remove statements to the contrary. 2014-02-01 20:46:35 +00:00
Nathan Whitehorn
a3845e4242 Avoid spurious compiler warning about an uninitialized variable. 2014-02-01 20:06:52 +00:00
Nathan Whitehorn
86d717f9d7 Fix typo. 2014-02-01 19:25:15 +00:00
Warner Losh
a865b1a02e Fix AT91SAM9260 to work with PA rather than VA device addresses. 2014-02-01 17:53:35 +00:00
Nathan Whitehorn
06763f5e55 Provide a simpler and more standards-compliant simplebus implementation to
get the Routerboard 800 up and running with the vendor device tree. This
does not implement some BERI-specific features (which hopefully won't be
necessary soon), so move the old code to mips/beri, with a higher attach
priority when built, until MIPS interrupt domain support is rearranged.
2014-02-01 17:41:54 +00:00
Nathan Whitehorn
bbc6da03ef Open Firmware interrupt specifiers can consist of arbitrary-length byte
strings and include arbitrary information (IRQ line/domain/sense). When the
ofw_bus_map_intr() API was introduced, it assumed that, as on most systems,
these were either 1 cell, containing an interrupt line, or 2, containing
a line number plus a sense code. It turns out a non-negligible number of
ARM systems use 3 (or even 4!) cells for interrupts, so make this more
general.
2014-02-01 17:17:35 +00:00
Hans Petter Selasky
b1a93b386c Add a comment about the origin of some structures, defines and so on.
MFC after:	1 week
2014-02-01 06:58:16 +00:00
Justin Hibbits
169dd953b0 Add hwpmc(4) support for the PowerPC 970 class processors, direct events.
This also fixes asserts on removal of the module for the mpc74xx.

The PowerPC 970 processors have two different types of events: direct events
and indirect events.  Thus far only direct events are supported.  I included
some documentation in the driver on how indirect events work, but support is
for the future.

MFC after:	1 month
2014-02-01 02:03:50 +00:00
Warner Losh
cb3b48b05d Move these for diff reduction against FDT work. 2014-01-31 23:38:05 +00:00
Warner Losh
9aa2e6f381 Minor cleanup of comments. 2014-01-31 23:28:18 +00:00
Warner Losh
3f10c1c0fc Fix silly typo... 2014-01-31 23:18:30 +00:00
Hans Petter Selasky
198fc7c37f Fix a range check for maximum transmit length. The existing code was
off by 4 bytes in one case.

Approved by:	kevlo @
MFC after:	2 weeks
2014-01-31 22:42:26 +00:00
Jamie Gritton
f15444cc97 Back out r261266 pending security buy-in.
r261266:
  Add a jail parameter, allow.kmem, which lets jailed processes access
  /dev/kmem and related devices (i.e. grants PRIV_IO and PRIV_KMEM_WRITE).
  This in conjunction with changing the drm driver's permission check from
  PRIV_DRIVER to PRIV_KMEM_WRITE will allow a jailed Xorg server.
2014-01-31 17:39:51 +00:00
Warner Losh
4587b6e9fd Switch to using PAs rather than VAs for the addresses we map for
devices. This is a nop, except for what's reported by atmelbus for the
resources.

It would be nice if we could dymanically allocated these things, but
the pmap_mapdev panics if we don't keep the static mappings, so we
still need to play the carefully allocate VA space between all
supported SoC game.

User's with their own devices may need to make adjustments.
2014-01-31 15:38:05 +00:00
Tijl Coosemans
b35ac06804 Rename the AMD MSR_PERFCTR[0-3] so the Pentium Pro MSR_PERFCTR[0-1]
aren't redefined.

Reported by:	"Trivedi, Nishank" <Nishank.Trivedi@netapp.com>
Discussed with:	kib
2014-01-31 14:29:34 +00:00
Hans Petter Selasky
4e8bc8514d Fix for unexpected selection with two fingers sometimes.
Fix for unexpected scrolling when click with two fingers.

Submitted by:	Huang Wen Hui <huanghwh@gmail.com>
MFC after:	1 week
2014-01-31 07:14:21 +00:00
Justin Hibbits
e1c161e74c Unbreak non-SMP builds. This was broken by r259284. Also, reorganize the
code introduced in that revision a bit.

Reviewed by:	nwhitehorn
MFC after:	3 weeks
2014-01-31 03:55:34 +00:00
Warner Losh
66a086e04a Hack: Add explicit depends on bus_if.h and device_if.h to avoid a
chicken and egg problem in some compilation environments.
2014-01-31 01:34:55 +00:00
Warner Losh
8b1bf92acc When mapping an address, the bsh needs the same offset we do for other
things.
2014-01-31 01:18:34 +00:00
Brooks Davis
a96ad70bfc Remove an unneeded space in the BERI merge. 2014-01-30 20:39:56 +00:00
George V. Neville-Neil
e1cda2b313 The timestamp bit is number 17, and not number 9, in the stat error
field of the receive descriptor.

MFC after:	1 week
2014-01-30 18:32:33 +00:00
Konstantin Belousov
49d39308ba The posix_madvise(3) and posix_fadvise(2) should return error on
failure, same as posix_fallocate(2).

Noted by:	Bob Bishop <rb@gid.co.uk>
Discussed with:	bde
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2014-01-30 18:04:39 +00:00
Dimitry Andric
4f7ab58ee6 Import libc++ 3.4 release. This contains a lot of bugfixes, and some
preliminary support for C++1y.

MFC after:	3 weeks
2014-01-30 07:44:22 +00:00
Warner Losh
9a40e29377 Fix the name of the dts file for the HL201... 2014-01-30 03:14:36 +00:00